ZOOM BTA-2 Bluetooth Adapter for PodTrak Series User Guide
- June 6, 2024
- Zoom
Table of Contents
ZOOM BTA-2 Bluetooth Adapter for PodTrak Series User Guide
Connecting a BTA-2 (dedicated wireless adapter)
By connecting a BTA-2, audio can be input through the smartphone connection jack via Bluetooth. LED Pairing switch.
Connecting
Pairing must be conducted the first time connecting.
-
While the P4 power is off, connect the BTA-2 to the smartphone connection jack and the BTA-2 power supply connector.
-
Turn the P4 power on ( “Turning the power on” on page 16).
The LED lights white when power is being supplied to the BTA-2. If a smartphone has already been paired, it will automatically be connected at this time. -
Press and hold the pairing switch until the BTA-2 LED blinks white.
This puts the BTA-2 into connection standby. -
Conduct connection procedures on the smartphone.
The LED will light blue when connection completes.
NOTE When connecting to a smartphone using a BTA-2, set INPUT SELECT switch 3 to .
Disconnecting
-
Conduct disconnection procedures on the smartphone.
This disconnects it. -
The P4 power should be off when disconnecting a BTA-2.