Sanctuary Spa Lost In The Moment Vegan Beauty Gift Box User Guide
- June 17, 2024
- Sanctuary Spa
Table of Contents
- Sanctuary Spa Lost In The Moment Vegan Beauty Gift Box
- Product Information
- Usage Instructions
- FAQ
- Certificate of Test
- ITEM INFORMATION
- LAB INFORMATION
- TEST RESULTS
- LAB TEST REQUEST {filled out by requestor}
- PRE-TEST INSPECTION {filled out by lab}
- PRE-TEST PICTURES
- TEST DETAIL
- TEST PICTURES
- POST TEST PICTURES
- ABOUT COMPANY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Sanctuary Spa Lost In The Moment Vegan Beauty Gift Box
Product Information
Specifications
- Average dimensions : 215 x 200 x 56 mm (length x width x height)
- Average weight: 0.55 kg
Usage Instructions
Testing Requirements
The product is designed to be tested according to the
requirements of ISTA 6-Amazon.com-Over Boxing on a range of
packaged-product formats.
Testing Procedure
The testing procedure involves subjecting 5 replicate samples to
the specified testing method.
Sample Dimensions
The average dimensions of the samples are 215 x 200 x 56 mm (length x width
x height).
Sample Weight
The average weight of the samples is 0.55 kg.
Test Results
The submitted sample has been classified as passing the ISTA 6 Amazon.com
Over-box test method.
Additional Details
For detailed information about the testing performed, refer to the attached
Amazon ASIN report.
FAQ
-
What are the dimensions of the sample?
The average dimensions of the sample are 215 x 200 x 56 mm (length x width x height). -
What is the weight of the sample?
The average weight of the sample is 0.55 kg.
Certificate of Test
ITEM INFORMATION
- Vendor/Seller Name : PZ Cussons
- ASIN: Unknown
- Item: Sanctuary £16 Lost in the Moment
- Certification Passed:
- Pass / Prep Free Packaging (PFP) *All items must pass for certification
- Fail / Enforced Over Box (EOB)
LAB INFORMATION
- Testing Lab: Smithers
- Location: Cleeve Road, Leatherhead, Surrey, KT22 7RU, UK
- Date of Test: 2/7/2020
- ISTA Member/ Lab Tech: ST-2063
TEST RESULTS
Post Test Comments:
- Overview
- Single’s Box Size: 13 inch (L) x 9 inch (W) x 4 inch (H)
- Multi’s Box Size : 14 inch (L) x 10 inch (W) x 5 inch (H)
- Dummy weights A, C, D
- Product Condition All products remained in good condition
- Packaging Condition N/A
LAB TEST REQUEST {filled out by requestor}
PRE-TEST INSPECTION {filled out by lab}
- Product Condition Good condition.
- Package Condition N/A
- Package Condition before testing
- ORIGINAL as arrived in the lab for testing
- NEW re-packaged with new materials before testing
- Corrugated Info (Box Cert if available) N/A
- Dunnage Info 8″ x 4″ air pillows
- Additional Notes N/A
PRE-TEST PICTURES
The least pristine ASIN pack should have 2 isometric pictures taken of the
ASIN package as prescribed below. Special call outs and or damage should have
description of location and detailed information in the text box below the
picture. If a box cert is present, a picture of it should be taken and
recorded.
Please note only one set of pre-test pictures are needed for the single and
multi pack out orientation.
TEST DETAIL
Items in black were completed and values updated.
TEST PICTURES
Pictures should be taken of each block test set up along with a post picture taken of the item at the end of each test block. Additional pictures of damage should have locations noted, size of damages measured, and written in text box below them.
POST TEST PICTURES
Pictures in the section should be taken in the following order; box is open
with dunnage still in place, dunnage removed, and finally isometric view
pictures of the ASINs should be taken as called out as in the two picture
spots state below. An exploded bill of material (BOM) view of the item when
applicable as the last mandatory picture. Additional pictures of damage should
have locations noted, size of damages measured, and written in text box below
them.
PLEASE COMPLETE SECTION FOR EACH ASIN TESTED
Standard Company Disclaimer:
This report is made subject to the conditions that it is confidential and may
not be disclosed in whole or in part to others without the written consent of
Smithers MSE Ltd
ABOUT COMPANY
- SMITHERS Shawbury, Shropshire, SY4 4NR, UK
- +44(0)1939 250383
- Cleeve Road, Leatherhead
- Surrey, KT22 7RU, UK
- +44(0)1372 802000
- www.smithers.com
- Materials Science and Engineering Division
- Smithers MSE Limited
- Registered in England & Wales No. 05761324
- Registered Office: Shawbury, Shropshire, SY4 4NR, UK
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>