prolink DL-7203E 4G LTE Mobile Wi-Fi Installation Guide

June 17, 2024
PROLiNK

prolink DL-7203E 4G LTE Mobile Wi-Fi

prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-PRODUCT

Package Contents

prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-2

Notes:

  1. The illustrations in this document may appear differently from your model.
  2. If any of the above item is not packed in your package upon opening, please consult your seller immediately.

Overview

prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-3

Interface and Buttons

  1. LCD display
  2. Power button
  3. LAN port
  4. USB Type-C port (Input)
  5. USB Type-A port (Output)
  6. Nano SIM slot

Hardware Installation

Installing the Nano SIM card
After turning off the device, insert the Nano SIM card into the Nano SIM card slot, and then power it on to work normally.

Note:

  1. Make sure the size of the Nano SIM card is appropriate.
  2. Put the Nano SIM card metal piece upward and push it into the card slot gently. When you hear a click, it indicates that the Nano SIM card is installed in place, and ensure that the Nano SIM card is in the correct direction.
  3. Push the Nano SIM card in slightly, and then release it completely to eject the Nano SIM card.

Charge the battery
If the unit has not been used for a long time or the battery is completely depleted, the unit may not power up immediately after the charger is plugged in. Please charge the battery for some time before trying to turn it on.

Note:

  1. Use only chargers that are compatible with this unit and supplied by the specified manufacturer. Using an incompatible charger or a charger from an unknown manufacturer may cause MiFi failure, malfunction, or even fire.
  2. Recharge battery: connect the provided USB cable to DL-7203E’s USB Type-C port.
  3. Power bank: works as a power bank to charge other devices by connecting through DL-7203E’s USB Type-A port.

Power On the device
Press and hold the power button for 5-10 seconds until the power is turned on.

Use 4G network
The management parameters of this machine have been preset according to the requirements. It will automatically connect to the Internet.

Note:
You can log in to the web administration page and enable or disable automatic connections.

Web-based Configuration

  1. Connecting to the device.
    • A. With a Wi-Fi connection.
    • Use your normal Wi-Fi application on the client to search for the available wireless network
    • Select the SSID of your device (default SSID Prolink_xxxx) to connect
    • The default password is prolink12345
    • B. With USB connection.
    • Connect the device with a USB cable to the Computer USB port
    • NDIS driver will be installed automatically
  2. Open the browser and enter http://192.168.1.1 or http://m.home,Enter default Username: admin and Password: password to log in.prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-4
  3. Click the upper right corner – Modify Login Password to change the default login password.prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-5prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-6
  4. Click Wi-Fi Settings to change default SSID and password.prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-7
  5. APN settings (If SIM card’s APN cannot be found by Auto Mode).
    • Click Network Settings
    • Select Mode to Manual
    • Click Add New button to enter the correct APN settings accordingly
    • The APN information should be available in the booklet that comes along with the SIM card or contact the telco to check.prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-8
  6. Enable Roaming for overseas travel.
  7. Switch off the connection under Connect Status
  8. Click Network Settingsprolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-9
  9. Tick “Enable Roaming” and click “Apply” Button.prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-10
  10. Switch on the connection after Roaming Enable.prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-11

QR SCAN

prolink-DL-7203E-4G-LTE-Mobile-Wi-Fi-FIG-1

Worldwide Customer Care Centers

INDONESIA Office
PT PROLINK INTIDATA NUSANTARA

MALAYSIA Office
FIDA SYSTEMS (M) SDN BHD

SINGAPORE Office
FIDA INTERNATIONAL (S) PTE LTD

Technical Support Hotline

  • INDONESIA: +62 21 3483 1717
  • MALAYSIA: +60 3 8023 9151
  • SINGAPORE: +65 6357 0666

Note: Closed on Saturdays, Sundays, and local/regional Public Holidays.

Register online for your Product Warranty at www.prolink2u.com
Prolink is a registered trademark of Fida International (S) Pte Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. Product images are purely for illustrative purposes and may deferring from the actual product. Specifications are subject to changes without prior notice. Copyright © 2024 Fida International (S) Pte Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals