RAIDER RDP-BL20 Cordless Blower Cordless Drill User Manual

RAIDER RDP-BL20 Cordless Blower Cordless Drill

Other Models

| Art. No.| Item Description
---|---|---
| 030130| R20 Cordless Drill Li-ion 2 speed 13 mm 44 Nm Solo RDP-SCD20
| 030220| R20 Cordless Drill Li-ion 2 speed 13 mm 44 Nm Solo RDP-SCD20S
| 030131| R20 Cordless Hammer Drill-Driver Li-ion 2 speed 13 mm 50Nm Solo RDP- SCDI20
| 030217| R20 Cordless Hammer Drill Li-ion 2 speed 13 mm 50Nm Solo RDP-SCDI20S
| 030222| R20 Auto touch cordless drill Solo RDP-SCDA20
| 030159| R20 Brushless cordless dray wall screwdriver Solo RDP-SBES20
| 030132| R20 Cordless Hex Impact Driver Li-ion 1/4″ 180 Nm Solo RDP-SHID20
| 030133| R20 Tile vibrator leveling machine Li-ion 1/2″ 250 Nm Solo RDP- SCIW20
| 030134| R20 Tile vibrator leveling machine Li-ion 1/2″ 400 Nm 5 speed Solo RDP-SCIW20-5
| 030221| R20 Tile vibrator leveling machine Li-ion 1/2” 400 Nm 5 speed Solo RDP-SCIW20S
| 030151| R20 Cordless Rotary Hammer Brushless Li-ion SDS-plus Solo RDP- SBRH20
| 030135| R20 Cordless Rotary Hammer Li-ion SDS-plus Solo RDP-SRH20
| 030136| R20 Cordless Angle Grinder Li-ion Ø125mm 10000min-1 Solo RDP-SBAG20
| 030223| R20 Brushless Cordless Angle Grinder Li-ion Ø125mm 11500min-1 Solo RDP-SBAG20S

| 030152| R20 Cordless Mixer Li-ion Solo RDP-SHM20
---|---|---
| 030137| R20 Cordless Jig Saw Li-ion quick 80mm Solo RDP-SJS20
| 030138| R20 Cordless Reciprocating Saw Li-ion quick Solo RDP-SRS20
| 030139| R20 Cordless Circular Saw Li-ion Ø165×20 mm 24T 4200 min-1 laser Solo RDP-SCS20
| 163143| Circular Saw Blade Tungsten Carbide Tipped Ø165×20 mm 24T
| 030140| R20 Cordless Random Orbit Sander Li-ion Ø125 mm variable speed Solo RDP-SRSA20
| 030141| R20 Cordless Multi-Tool Li-ion 3° variable speed quick Solo RDP- SOMT20
| 030154| R20 Cordless Glue gun Li-ion ø11 Solo RDP-SGLG20
| 030160| R20 Cordless heat gun Li-ion Solo RDP-SHG20
| 030153| R20 Cordless stapler comb Li-ion Solo RDP-SST20
| 074202| R20 Пистолет за боя акум. Li-ion Ø1.5 1.8 2.2 mm 1 L Solo RDP-SSGC20
| 039706| R20 Adapter USD with lamp for series RDP-R20 System
| 075328| R20 Lawn mower Li-ion 360 mm 35L Solo RDP-SLM20

| 075711| R20 Cordless brush cutter with blade and trimmer head detachable shaft RDP-SBBC20 Set
---|---|---
| 075712| Pole saw head tube for RDP-SBBC20
| 075713| Hedge trimmer head with tube for RDP-SBBC20
| 075545| R20 Cordless trimmer Li-ion 300 mm Solo RDP-SCBC20
| 075707| R20 Cordless hedge Li-ion 510 mm Solo RDP-SCHT20
| 075708| R20 Cordless pole saw Li-ion 510 mm set RDP-SPS20
| 075710| R20 Cordless chain saw Li-ion 200 mm solo RDP-SCS20
| 030155| R20 Cordless chain saw brushless 350 mm (14″) Solo RDR-SBCS20
| 090319| R20 Cordless wet and dry cleaner Solo RDR-SDWC20
| 090320| R20 Ash cleaner Solo RDR-SWC20
| 030211| Cordless Drill Li-ion 2 speed 13 mm 44 Nm 20 V 1.5 Ah 1 h RDP-SCD20 Set
| 030219| Cordless Drill Li-ion 2 speed 13 mm 44 Nm 20 V 1.5 Ah 1 h RDP-SCD20S

Set

| 030215| R20 Brushless cordless drill Set RDP-SBCDA20 Set
| 030208| Cordless Hammer Drill-Driver Li-ion 2 speed 13mm 50Nm 20 V 2×2 Ah 1 h in Case RDP-SCDI20 Set
| 030216| Cordless Hammer Drill Li-ion 2 speed 13mm 50Nm 20 V 2×2 Ah 1 h in Case RDP-SCDI20S Set

| 030209| Cordless Angle Grinder Li-ion Ø125mm 10000min-1 20 V 2 Ah 1 h in Case RDP-SBAG20 Set
---|---|---
| 030224| R20 Brushless Cordless Angle Grinder Li-ion Ø125mm 11500min-1 Sет RDP-SBAG20S
| 030210| Cordless Jig Saw Li-ion quick 80mm 20 V 2 Ah 1 h in Case RDP-SJS20 Set
| 075709| R20 Cordless chain saw Li-ion 200 mm set RDP-SCS20
| 090315| R20 Ash cleaner Set RDR-SWC20
| 032120| R20 System Starter Kit Li-ion 2 Ah 1h for series RDP-R20 System
| 131110| R20 Battery Pack Li-ion 20 V 1.5 Ah for series RDP-R20 System
| 131152| R20 Battery Pack Li-ion 20 V 2 Ah for series RDP-R20 System
| 131153| R20 Battery Pack Li-ion 20 V 4 Ah for series RDP-R20 System
| 131157| R20 Батерия Li-ion 20 V 6 Ah за серията RDP-R20 System
| 039703| R20 Battery and Charger for series RDP-R20 System
| 039704| R20 Rapid Charger for series RDP-R20 System
| 039707| R20 Dual Charger for series RDP-R20 System 2×3 A

Withouth Battery & Charger

Dear Customer

Congratulations on the purchase of machinery from the fastest growing brand of electric and pneumatic tools – RAIDER. When properly installed and operating, RAIDER are safe and reliable machines and work with them will deliver a real pleasure. For your convenience has been built and excellent service network of 45 service station across the country.
Before using this machine, please carefully acquainted with these “instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully, including the recommendations and warnings in them. To avoid unnecessary errors and accidents, it is important that these instructions will remain available for future reference to all who will use the machine. If you sell it to a new owner “Instructions for Use” must be submitted along with it to enable new users to become familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark RAIDER.
Address: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel +359 700 44 155, www.raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope of certification: Trade, import, export and servicing of hobby and professional electrical, mechanical and pneumatic tools and general hardware. The certificate was issued by Moody International Certification Ltd, England.

TECHNICAL DATA

Product Features

1. Lever of the switch.
2. Handle.
3. Battery
4. Air intake port.
5. Direction nozzle.
6. Air output.

General instructions for safe operation

Read all instructions. Failure to follow the instructions may result in electric shock, fire and / or serious injury. Keep these instructions in a safe place.

Safety in the workplace

Keep work area clean and well lit. Cluttered and inadequate lighting may contribute to the occurrence of accidents.
Do not operate the battery device for blowing in environments with increased danger of  explosion, close to flammable liquids, gases or dust.
During operation of the battery device for blowing may create sparks that can ignite the dust  or fumes.
Keep children and bystanders away while operating a battery device for blowing.
If your attention be diverted, you may lose control over the battery meter blowing.
Safety when working with electricity.
Plug the charger must be suitable for use contact. In no case be allowed to modify the plug. When working with zeroed appliances do not use adapters plug.

Unmodified plugs and sockets reduce the risk of electric shock.
Protect the battery device for blowing rain and moisture.
Water entering a battery device for blowing increases the risk of electric shock.
Safe way of working
Be alert, watch carefully their actions and act cautiously and wisely. Do not use the battery unit for blowing when you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating battery device for blowing can have the effect of severe injuries.
Use personal protective clothing and always wear eye protection.
Wearing suitable for use cordless device for blowing and activity carried personal protective equipment such as dust mask, healthy tightly closed shoes with a stable tread protective helmet and silencers (earplugs) reduces the risk of accident.
Avoid the danger of inclusion of the battery unit for blowing inadvertently. Carrying battery device for blowing your finger on the switch, there is a risk of accident.
Do not overreach. Work in a stable body position and at any time maintain balance. So you can control the battery unit for blowing better and safer unexpected situations.

Dress properly. Do not operate with loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts of the battery unit for blowing. Loose clothes, jeweler or long hair can be caught in the chuck.

Care of the battery unit for blowing
Do not overload the battery meter blowing. Use battery device for blowing only according to its purposes. You will work better and safer when using the appropriate cordless device for blowing in specified by the manufacturer load range.
Keep the battery device for blowing of places can not be reached by children. Do not allow it to be used by persons who are not familiar with how to operate it and not read these instructions. When in the hands of inexperienced users, the battery unit for blowing can be dangerous.
Keep the battery device for blowing care. Check that the mobile units are functioning flawlessly, if not spells that have broken or damaged parts that violate or alter the functions of the battery unit for blowing. Before using the battery device for blowing damaged, have the tool repaired. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less resistance and working with them easier.
Use battery meter blowing, attachments and tools, according to the manufacturer’s instructions. Respecting and specific working conditions and operations that must follow. Using a cordless device for blowing other than those intended increases the risk of occurrence of accidents.
Instructions for safe handling specific to your purchased cordless device for blowing.
Attention! Loss of control over the power tool may result in the occurrence of accidents.
Do not use accessories that are not recommended by the manufacturer specifically for this power tool. The fact that you can attach to the machine definitely accessory or working tool, not ensure safe handling.
Never place your hands near the rotating work tools If you run activities where there is a risk cutting tool may contact hidden wiring, hold the tool only for the insulated gripping. Upon entering the tool in contact with live wires it metal parts of the battery device for blowing and this could lead to electric shock.
Use proper utensils to find any hidden beneath the surface pipelines, or contact the local utility company. Entering into contact with live wires can cause fire and electric shock. The damage to the pipeline could lead to an explosion. Penetrating a water line causes property damage or may cause an electric shock.
Keep stable machine.
Clean vents of your cordless device for blowing.
Use only recommended battery and charger.
The battery should always be kept away from heat sources. Do not leave it for a long time in an environment with high temperature (of the sun places near heaters or where the temperature exceeds 50 ° C).
The charging time the battery should not exceed 1.5 hours, otherwise it may be damaged.
Avoid charging the battery at temperatures below 0 ° C.
The charger is designed to work with her. It should not be used for other purposes.
Do not place, any metal objects into the charger.
The battery must be recharged when it fails to produce enough power to operate. Do not continue to use the appliance for blowing under these conditions. Follow the loading procedure. You can also charge the battery partially used when you wish, without adverse effect on battery.
To clean the battery unit for blowing use a soft, dry cloth. Never use any solvent or alcohol.
Before cleaning the charger, disconnect it from the network.
If you are charging the batteries one after another between charges make breaks of 30 minutes.
Special safety conditions at work with the charger.
Before proceeding to work with the charger must read all related to him and contained in this instruction information and indications on the charger and battery, for which it is intended.
Special safety conditions at work with the charger.
Before proceeding to work with the charger must read all related to him and contained in this instruction information and indications on the charger and battery, for which it is intended.
To reduce the risk of injuries and injuries charger should only be used to charge the batteries of nickel-cadmium type. The batteries of another type may explode, causing serious injuries or property damage.
The charger should not be exposed to the influence of moisture or water.
The use of attachment not recommended or sold items from the charger manufacturer jeopardized by fire, causing injury or electric shock.
The power cord should not be walked on. It should not be located in the passage where people pass and should not be subjected to any other danger (eg too much tension).
If not necessary, do not use extension cord. Using an improper extension cord may cause fire or electric shock. If using an extension cord is necessary, first make sure whether the contact of the extension corresponds to the pins on the original connector, power charger.
The extension must be in good working order.
Not for use charger with a damaged cord or plug. The damage must be repaired by a qualified person.
Not allowed to use the charger if it has been subjected to a strong impact, fall or has been damaged otherwise. Inspection and possible repair should be entrusted to an authorized service RAIDER.
Do not allow attempts to disassemble the charger. All repairs must be entrusted to authorized service RAIDER. Improper installation of the charger threatening electric shock or fire.
Before conducting any scheduled maintenance or cleaning the charger, it should be unplugged.
The charger can be excluded from the mains when not in use!

Functional description and purpose

Battery unit for blowing a handheld power tool powered by a battery. Powered by a collector motor DC permanent magnet planetary and helical wheels and is designed for blowing leaves and other light objects at home. Not for use of the battery unit for blowing activities other than its intended purpose.

Assemble the elements of the battery device for blowing and commissioning.
Some parts of the device for blowing dismantled in order to reduce the volume of the container during transport

Assembling the directional nozzle:
Bring the wide end of the nozzle to the exit of Vaduz machine. Align small hole to connect on the nozzle with a groove which is located on the machine frame. Connect them to each other, push the nozzle hole in the hull.
Inserting / removing the battery
Remove the battery before any manipulation or cleaning the machine.

• Always release button on / off before inserting or removing the battery.
• To remove the battery, press the button at the end of the battery, then remove it from the tool.
• To insert the battery, slide the two grooves on both sides of the battery into the groove of the housing and slide it into place. Always slide until it clicks into place. If you do not, it may accidentally fall out of the tool and cause harm to you or someone around you. Do not use force when inserting the battery. If the battery does not slide easily, it means that it is not installed correctly

Maintenance and Storage

After use, remove the battery from the unit for blowing and check for damage;
When not in use store the machine within reach of children;
Use only the manufacturer’s recommended spare parts and accessories RAIDER;
Once the machine is turned off, the rotor continues to move for some time by inertia! Before working on the device for blowing wait rotation of the motor to stop completely!
Perform maintenance procedures regularly to ensure your long-term and reliable use of the device for blowing. Check periodically for visible defects such as loose screw connections. Make sure that the covers and safety equipment are in working and installed correctly.
Cleaning tool, remove the battery and use mild soap and a damp cloth to clean the instrument.
Do not immerse the instrument in water and wash it with a hose. Do not allow any liquid to enter inside it. Do not clean with high pressure cleaner.

Starting device for blowing

Turn on:

• Hvatenete handle (2) with the hand that you prefer (left or right).
• Place your finger on the lever of the switch (1).
• Push the switch (1).

Turn Off:

Release the switch (1).

Practical tips:

Observe local regulations for the time of day during which you can use the machine outdoors. In some countries it is prohibited cutting the morning before 08.00 hours, in the afternoon between 2:00 p.m. to 16:00 hours and in the evening after 22.00 hours, to protect citizens from unwanted noise.

If necessary, repair your appliance vent is best to be performed only by qualified specialists in the workshops of RAIDER, where only use original spare parts. Thus ensure their safe operation.

Environmental protection.

 The machine, accessories and packaging should be sorted for environmental friendly recycling.
Do not dispose of power tools into household waste!
According the European Directive 2012/19/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner.
7.2. Battery packs/batteries:
Litium-Ion (Li-ion).
Warning! These battery packs contain cadmium, a highly toxic heavy metal.
Do not dispose of battery packs/batteries into household waste, fire or water. Battery packs/ batteries should be collected, recycled or disposed of in an environmental-friendly manner. Defective or dead out battery packs/batteries must be recycled according the Directive 2012/66/ EEC

EXPLODED VIEW OF CORDLESS BLOWER RDP-BL20

 DECLARATION OF CONFORMITY

Cordless Blower RDP-BL20

Euromaster Import Export Ltd., Address: Sofia 1231, Bulgaria, 246 Lomsko shausse Blvd.

We declare under our sole responsibility that this product is in conformity and accordance with the following standards and regulations:
EN 60335-1:2012+A11; EN 50636-2-100:2014; EN 62233:2008
EN 55014-1:2021; EN 55014-2:2021; EN 61000-3-2:2019; EN 61000-3-3:2013/A1:2019

LWA = 93dB(A)
2006/42/EU, 2014/30/EU, 2014/35/EU, 2000/14/EU

Place & Date of Issue:
Sofia, Bulgaria
20 november 2023

Brand Manager:
Krasimir Petkov

LISTA CENTRELOR SERVICE AUTORIZATE

• BUCHAREST : STECO SRL – Str. Precupetii Vechi, no. 29, Tel: 0723.686.274
• BUCHAREST : EUROMASTER SRL – Roadul Garii Otopeni no 6, Otopeni, Ilfov, Tel: 021.3510106
• BUCHAREST : ALFA ENERGY SERVICE SRL – Bd Timisoara no 82 sect 6, Tel: 0760.424.528
• BACAU : COMELECTRO BG SRL – Str. Energy, no. 34-36, Bacău, Tel: 0234 519 963
• BAIA MARE : PIATETA SRL – 1/6 Pasunii Street, Tel: 0262-277266
• RIDERS : ŞTEFAN ALEX SRL- Str.Parcului Bl.K4,ScE,Ap.1, Tel: 0735.199.024
• CRAIOVA : MOSTOLES SRL – Str. Braila, no. 45, Tel: 0762.941.611.
• ARGEŞ COURT : VIVA METAL DECOR SRL- Str. Albeşti No. 10 (In the Precinct of the Former Bus Depot Zenith); Phone: 0722.531.168 / 0732.148.633
• IAŞI : P&D POLIDOM SRL (ELECTRIC TOOLS ONLY) – Str. Morilor, no. 68, Tel: 0726.010.110
• WEDNESDAY CIUC : GRIMMAULD SERVICE SRL – Str. Harghita, No. 29, Tel: 0740044574
• NAME : TEHNOHOBY IMPEX SRL – Str. Obor, Bl. O2, Ground floor, Piatra Neamt, Tel: 0233236333
• ODORHEIUL SECUIESC : II GHIORY FERENC, Str. Baii Sarate, No. 38, Tel: 0743986648
• PITEŞTI: CONTACT TOP SERVICE SRL – Str. Constantin Brancoveanu 2, Tel: 0746 889 424
• PITEŞTI : GREBO 2003 SRL, CALEA CAMPULUNG, No. 647, Piatra Neamt Tel: 0740003344
• PLOIEŠTI : SUPER GARDEN TECH – Str. Strandului, no. 11-13, Tel: 0734 467 171
• RâMNICU VâLCEA : ELECTROSANDU SRL – Str. Arinilor, no. 78, Tel: 0372.934.304/ 0726.294.813
• ROMAN : EUROTECHNIC SRL, B-dul. Roman Musat, Bl. 3, ground floor, Tel: 0727 743 214
• SUCEAVA : TOP STRONG SRL-D – Calea Unirii no. 35 (IRIC premises), Tel: 0758.079.782
• TG. MUREŞ : ALTISAN SERVICE TEAM SRL- Piaţa Bolyai, no. 9, Tel: 0740.019.726
• TULCEA: ABC INTERNATIONAL SRL – Str. Babadag no. 5, Block 1, Sc. A, Ground floor; Phone: 0240.518.260
• TG. JUI : MKNICK SRL D – Str. Victoriei, no. 287, Tel: 0765332581.
• DEVA : TRANSILVANIA UNISERV SRL – Str. Horia, Bl. 5, Ground floor, Tel: 0722.373.177.
• ORADEA : ERMEKO TRADE SRL – Str. Factorii No. 2, Tel: 0740232273
• TIMISOARA : ROCK GARDEN SRL – Str. Closca, No. 21, Tel: 0744870373
• ORAVITA : CONDOR-EX SRL- CLOSCA str., NO. 33 C, Tel: 0760 257 979
• ARAD : DUO LEND SRL- Com. Vladimirescu, Str. 4, No. 2, Tel: 0742020909 14. Record of repairs during the warranty period

Euromaster Import Export Ltd.
Address : Sofia 1231, Bulgaria, 246 Lomsko shausse Blvd.
Product : Cordless Blower
Trademark: RAIDER
Model : RDP-BL20
is designed and manufactured in conformity with following Directives:
2006/42/EC of the European Parliament and the Council dated 17-th May 2006 on machinery 2014/30/EU of the european parliament and of the council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits 2000/14/EC of the European Parliament and of the Council of 08 May 2000 relating to the noise emission in the environment by equipment for use outdoors;
Noise emission according to standart EN ISO 3744:2010.
Measured sound power level: LWA = 90dB(A)
Guaranteed sound power level LWA = 93dB(A)
Notified body:
0197 TÜV Rheinland ,3F Building, National Hi-Tech Zone, 315048
and fulfils requirements of the following standards:
EN 60335-1:2012+A11
EN 50636-2-100:2014
EN 62233:2008
EN 55014-1:2021
EN 55014-2:2021
EN 61000-3-2:2019
EN 61000-3-3:2013/A1:2019

Place&Date of Issue:
Sofia, Bulgaria
20 november 2023

Brand Manager:
Krasimir Petkov

WARRANTY CARD

Central Service: Bulgaria, Sofia, “Lomsko shose” 246, tel .: +359 700 44 155 (free for the whole country)

Customer Support

EUROMASTER IMPORT EXPORT LTD

1231, Sofia, Bulgaria, 246 Lomsko shose Blvd.,
tel.: +359 700 44 155
fax: + 359 2 934 00 90
www.euromasterbg.com; e-mail: info@euromasterbg.com

www.raider.bg

References

• EUROMASTER Import Export LTD.
• EUROMASTER Import Export LTD.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>