ASAKUKI ZH-001S Ultrasonic Top Fill Humidifier User Manual

USER MANUAL
Ultrasonic Top-Fill Humidifier
Model No: ZH-001S

ZH-001S Ultrasonic Top Fill Humidifier

Please read carefully before use and save the instructions.
Questions or Concerns?
Please contact us: support@asakuki.com
Clean the water tank every 3 days.

• Be aware that high humidity levels may encourage the growth of biological organisms in the environment

• Do ot permit the area around the humidifier to become damp or wet. If dampness occurs, tur the output of the oil difiuser down.
  If the oil diffuser output volume cannot be tured down, use the oil diffuser intermitently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.

• Unplug the appliance during filing and cleaning.

• Never leave water in the reservoir when the appliance is not n use.

• Empty and clean the oildiffuser before storage. Clean the oil diffuser before next use.

Warning: Micro-organisms that may be present in the water or in the environment where the appliance is used or stored, can grow in the water reservoir and be blown in the air ‘causing very serious health risks when the water is not renewed and the tank is not cleaned properly every 3 days.

Package Contents

Specifications

Safety Information

General Safety

• Only use the humidifier as described in this manual.
• When not in use for an extended period, turn the humidifier off and disconnect the plug from the outlet.
• Do not use the humidifier in wet environments.
• Keep the humidifier out of reach from children.
• Do not attempt to disassemble the humidifier or its components.
• Always unplug the humidifier from power before cleaning it.
• Always place the humidifier on a flat, horizontal surface before using.
• Only fill the water tank with clean water. Never fill the water tank with any other liquids.
• Do not place the humidifier near heat sources such as stovetops, ovens, or radiators.
• Do not place the humidifier directly on carpets or rugs.
• Do not use non-Asakuki humidifier parts as replacement parts for this product.
• Do not cover the nozzle while the humidifier is on, as this may damage the humidifier.
• Do not immerse the power cord, or power plug in water.
• If the humidifier is damaged or is not functioning properly, stop using it and contact Customer Support immediately.
• Not for commercial use. Household use only.
• To reduce the risk of fire, electric shock, or other injury, always follow ail instructions and safety guidelines.

Power Cord & Plug

• Ensure that the plug fits properly into a polarized outlet.
• Do not handle the power cord or plug with wet hands. Keep the power cord and plug away from liquids.
• Your humidifier has a polarized plug (one prong is wider than the other), which fits into a polarized outlet in only one orientation. This is a safety feature to reduce the risk of electric shock. If the plug does not fit, reverse the plug to the correct orientation. If it still does not fit, do not bypass this safety feature and try forcing the plug into the outlet; instead, do not use it with the outlet.

Risk of Leaks and Electric Shock

• Do not add essential oils, supplemental water treatment liquids, or water filters into the water tank or base chamber, as this may damage the humidifier and cause leaks.

Getting to Know Your Humidifiers

Quick Easy Guide
Product Overview Touch Button Functions

A Power/Speed Button
1st Press —— Power On
2ndl/316/4th Press —— Low/Medium)High Mist
Sth Press —— Turm on AUTO mode
Hold 3 seconds — Power Off
B Humidity Button
Press —You can only press the button under AUTO mode to customize the target humidity between 45-80%.(machine will keep misting on low speed even if reach the target humidity)
C Light/Sleep Button
Press —— 7 Colors Cyclic night Light On/off
Long Press — Turn off the screen and night light, automatically adjusts the mist level to maintain 40%-60% relative humidity
D Timer Button
Press — Schedule the Timer for 1/2/4/8 Hours
Remote Control Funtions A. Power On/Off
Control power on and off, speed 1 when the machine s powered on
B. Level Adjustment
In speed mode, for mist level adjustment
In auto mode, adjust the target humidity by 5% between 45%-80%
C. Light On/Off
7-color night light cycle
D. Timer
Schedule the Timer for 1/2/4/8 Hours
E. AUTO Mode On/Off
Use the humidifier’s sensor to automatically adjust the mist level to maintain a comfortable and healthy humidity level. You can set the ideal humidity in 45%-80% (machine will keep misting on low speed even if reach the target humidity)
F. Sleep Mode On/Off
Turn off the screen and night light, automatically adjusts the mist level to maintain 40%-60% relative humidity
**** If the remote contolisoutof power, please unscrew thebattry cover ith a hard object and replace the old battery with new 3V CR2025 battery.

Getting Started

Filling Water

1. Remove all packaging

2. Clean the water tank and water tank cover before first use.
   Note: Check to make sure that the fixed pipe is correctly in place. I not, stuckitin the air outlet.

3. Choose a hard, fla location for the humidifier atleast 12 inches / 30 cm away from any walls. The surface must be water-resistant Mist should be directed away from walls, furniture, bedding, and appliances.

4. Thenyou can directly add water fom thetop inlets on both sides(NOT the mist outletinthe middle) or take the cover off and add water.

5. Cover thelid, connect the power cord to the machine and the power supply, and tur iton to use.

Important Tips:

1. Do not add essential oils to the water tank and mist tube, only add oils to the designated positions in tube.
2. Do not add water over the max line, otherwise it will affect the mist effect and service life.
3. Please Remove Mist Tube Before Pouring Water. DO NOT let the water into the Air Outlet while pouring water.
4. Recommend adding distiled water and changing the water every day. Clean the water tank every 3 days.

Using your Humidifier

1. Plugin the humidifer. Press to turn your humidifier on,
2. Tap repeatedly to cycle through fog settings: Auto Mode, Low, Medium and High.
3. Use the controls to activate sleep mode, tum the night light on/off, and more.
4. In automatic mode, you can customize your target humidity.
5. Hold the power for 3s of the power button of the remote control to tur off the hurnidifier.

Auto Mode: Use the humidifier’s sensor to automatically adjust the mist level to maintain a comfortable and healthy humidity level. By default, the humidifier will keep running on Low mist level when the customized target humidity level is reached.
Sleep Mode: Turns off the display lights and the 7 color night light Aromatherapy Function: Place the aromatherapy box included into the mist pipe correctly, It is recommended 1-2 drops of essential oil each time.
Night Light: 7 colors of light cycle switching, more suitable for use at night an easy to observe the water level line.(Not obvious in bright light environment) Note: The humidifier will stop working if there is no water in the tank. A red icon of water shortage will appear on the screen.

Cleaning Maintenance

Cleaning Steps
The humidifier should be cleaned after a week of use or before being stored away.

1. Unplug the humidifier.
2. Remove the water tank cover and the fixed pipe from the tank, and pour out any water from the tank.
3. Rinse the cover with room temperature: ‘water. Wipe the tank and surface of the unit with a soft, wet cloth if needed.
4. If you want to wash the mist tube, firstly removing the upper part, the energy-ring will fall out, after washing them with wateryou need to make sure the direction of the energy ting s right(there is note”this side is up?) to reassemble.

Note:

1. DO NOT let water into the air outlet in the tank otherwise the machine will be broken.If water does accidentally enter the air outlet, place the humidifier base in 2 ventilated place to dry before using or contact customer service.
2. Ensure that the mist pipe is properly installed back to right position.

Descale the Humidifier

To descale the humidifier:

1. Remove the water tank cover and remove the mist tube
2. Fillthe tankwith 3 US cups/710 mi distilled white vinegar. Also brush white vinegar around the inside of the tank and place back the tank cover.
3. Soak for 15-20 minutes. Remove the tank cover, pour out all the inegar, and rinse with clean water.
4. Take the mist tube apart and put tin a small container. ill them with enough vinegar to cover them. Soak for 15-20 minutes, and then assemble it back on after cleaning (note that the side with the marked word on the energy ringis facing up)

Note:

1. Depending on usage and water type, cleaning to remove scale may be required weekly or every other wieek to optimize unit performance.
2. If you live in a hard water area, we recommend distilled water for your humidifier to help reduce the precipitation of minerals or white dust.
3. Do not clean the unit or water tank with harsh detergents or cleaning chenicals.
4. Always unplug the humidifier before cleaning it anyway.

Troubleshooting

The troubleshooting section below s for solving frequently asked questions for the humidifer.
If your problem persists, please contact customer support.

fixed pipe and energy ring has been installed correctly, then restart the humidifier.
There is airflow spout out from mist outlet but no mist generated| Excessive water: pour out extra water,the waterlevel should not over the maximum waterline: Residue inside tank: please clean the water tank and restart the humidifier.lf you use hard water, replace with soft or purified water.
The humidity has a bad smell| Inappropriate cleaning: clean the humidifier regularly, change the water and fillit with fresh clean water accordint to the frequence of uses.
White dust is formed on nearby furniture| Hard water may deposit a certain of dust: dust intheair also settles because of added humidity in the room. Please add soft water, like purified water, filtered waterwhile operating the humidifier to prevent from dust.
Humidifier has stopped working| No or not enough water: unplug the unit and refill the water tank.
Increased noise level| The humidifier must be placed on a flat, firm surface: make sure it is No placed on a soft or absorbent surface. Please keep away from the humidifier for 3-5 meters when sleeping.
Red light on screen| Not enough water: unplug and refill tank. Floater orenergy ring is not installed properly: take them off and install again. ( Note: the smooth sideof the energy ring should face up)
The sound of water drop| The sound of water drop will be heard under high mist modeand low water Ievel. Please put the humidifieron a flat place and add enough water.then reopen it.

Warning & Attention

Attention!
Prohibition

• Please confirm whether the voltage in this city conforms tothe specification of the product before use.
• The product will produce moisture when working, pleasekeep away from other household electrical appliances.
• Do not place the product where it s exposed to strong light o hot air.
• When notin use for a long time, please cut off the powerand unplug the power.
• When pouring water into the tank, do not exceed the highest water level to prevent water overflow into the body.
• Do not use hard object to knock the surface of the humidifier to prevent the shell from cracking.

Warning
Forbidden to disassemble
Non-professional personnel, do ot dismantle the machine, so as to avoid electric shock accident!
Prohibition

• Do not place the product around a stove or other heat radiation source or inflammable or explosive material to avoid accidents.
• Please do not use wet hands to plug in or out the power to avoid electric shock.
• When the machine is turned on, please do not touch the atomizer sheet with hand to avoid hurting.
• The power line must not be scratched, damaged, excessively bent, pulled, twisted, knotted, and do not press heavy objects on it or clamped or processed toavoid the risk of electric shock.
• Please do not put metal products, chemicals, detergentlnto the water tank, otherwise there will be poor atomi-zation problem.
• This product is for indoor use only.keep out of reach of children.

Customer Service

| 2 Year Limited Warranty| | Lifetime Technical Support
---|---|---|---
| www.asakuki.com| | support@asakuki.com

Ifyou have any questions or concerns about your new product, please contact our helpful Customer Support Team.
Brand: ASAKUKI
Product Name: HUMIDIFIER
Model Number: ZH-001S
Power Input/Output: 27 W
Voltage: AC 100V-2401,50/60Hz
WEEE-Reg -Nr.DE41980660
Manufacture:Chongqing Chuang Hong Dian Zi Shang You Xian Gongsi
Address: CN401120,chongging.chongging beibuxinau, Lzhuang11-3 jinkaidadao1228hao,beibuxingu

EU Responsible Person: C&E Connection E-Commerce (DE) GmbH
Address: Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
Tel: +49 017 46508451
E-mail: info@ce-connection.de
Made in China
For EU Consumers

UK Responsible Person: APEX CE SPECIALISTS LIMITED
Address: 89 Princess Street, Manchester, M1 4HT, UK
Contact: Wells
Tel: +441616371080
E-mail: info@apex-ce.com
Made in China
For UK Consumers

WARNING
KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe bums can occur within 2 hours of ingestion. Seek medical attention immediately.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>