F D A521X 2.1 Computer Multimedia Speaker User Manual
- June 17, 2024
- F D
Table of Contents
F D A521X 2.1 Computer Multimedia Speaker User Manual
CAUTION:
-
Do not place the system in the high-temp and humid environment. prevent it from raining or rough handling
and strong shock. -
In order to avoid electric shock and other accidents.do not open the right side panel cover for repair without any professional guidance.
-
In case fragments or other ligiids is accidentally sprinkled inside the cabinet, please switch off the power immediately In case of repair pls Come to the professional maintenance for help.
-
Switch off the power and take off the plug from the power jack when the system is not on work.
-
Keep it safe from water drops or splashing water, and no liquids container allowed to be put on its top side.
-
Keep the cabinet vent far from the wall by 20mm at least and the air vent should not be blocked.
Do not keep it close ta the fire.
SYSTEM COMPOSITION:
INSTALLATION GUIDE: (See the below guiding pictures)
- Connect the satellite speaker cable to the output port of subwoofer in respective color port
- Insert Input signal cable(RCA Socket) into subwoofer input port and the other end with output port of your
AudioNideo system in respective color port.
Front panel keys
Function of Panel keys
-
Turn on the unit through Power ON/OFF button.
-
Switch between BT, AUX, USB and FM mode.
-
a. USB Mode: Short press to play/pause the music.
b. FM Mode: Short press to start Auto Search & this will store the found frequencies (channels) automatically.
c. Bluetooth mode: Long press will enter in to pairing mode, Blue LED will flash fast. short press of this key will play/pause the music. -
a. USB mode: Short press to decrease volume, long press to select previous song.
b. FM mode: Short press to decrease volume, long press to select previous stored station.
c. Bluetooth mode: Short press to decrease volume, long press to select previous song. -
a. USB mode: Short press to increase volume, long press to select next song.
b. FM mode:Shor t press to increase volume,long press to select next stored station.
c. Bluetooth mode: Short press to increase volume, long press to select next song.
LED indicator: Blue for Bluetooth, Red for FM, Green for USB, Red/Green flash alternately for AUX.
Remote control
A. : turn on/off unit.
B. AUX, Bluetooth ,USB (For USB Mode) and FM key: short press the keys to
switch to respective modes.
C. : press it to mute or unmute the sound.
D. : decrease or increase master volume.
E. Tune+/-: FM mode:
Fine Tuning: Short press to increase or decrease one step (100Khz), FM LED
flash once.
LED stop flashing once it reaches to Minimum or Maximum frequency. Manual
Tuning:
Long press of this key works for Manual tuning, It finds the next available
frequency.
F. MEM: Short press of this key work to store tuned station through Fine or
Manual tuning. FM LED flash once to indicate store/save operation.
G. CH+/-: select saved channels in FM mode.
H. Scan: FM mode: Short press to start Auto Search & this will store the found
frequencies (channels) automatically.
I. Enter: confirm setting and return to main screen.
J. 0~9 number keys:
1. USB source: directly press numeric keys through remote to select your
favorite song if you know the song number in the folder. The system will
automatically play the last song of the folder if you enter the number greater
than total number of songs in that folder.
2. FM source: directly press numeric keys through remote to select your
favorite station if you know the station
number (1~100). Or press 3 or 4 digits of frequency to play that station, for
example, 1026 for 102.6 MHz station.
K. : USB and BT mode, short press to play or pause.
L. : USB and BT mode, short press to select previous song.
M. : USB and BT mode, short press to select next song.
N. Folder / : USB mode, short press to select next/previous folder.
O. :short press to enter in to Bluetooth mode & long press will enter in to pairing mode. Blue LED will flash fast during pairing mode.
P. Reset: short press to reset the current mode & Long press to reset the factory setting.
Bluetooth pairing
Switch to Bluetooth mode, A521X will automatically search the Bluetooth
device. If the device paired before, A521X will connect automatically.
If can’t find paired device, A521X will enter pairing mode automatically,
bluetooth LED under pairing button flashes quickly.
- Active “Bluetooth” function on your device and search for “Fenda A521X”. Enter “0000” if your device asks for the PIN code..
- After pairing successfully, Bluetooth LED display will be bright, and ready for playing music. Recommend to adjust suitable volume before playing music.
Tips: To make sure your PC or notebook is working well with our Bluetooth speakers, it is recommended that you check with your PC or notebook vendor first. Make sure the correct Bluetooth driver software is installed
Specifications
Compatibility:
Compatible with Smartphones and tablets supporting Bluetooth (A2DP) protocol
Troubleshooting
WARRANTY TERMS & CONDITIONS
The warranty will be effective only if the warranty card is completed and
returned to the company within 14 days from the date of purchase. We guarantee
the provision of free services of IC6D product within the warranty period from
its date of purchase from our Authorised Dealer.
The period and conditions of our warranty service are as follow:
-
The warranty covers services by our IS RIO Authorised Dealer. This warranty card together with the receipt must be presented when servicing is required. This warranty card is irreplaceable in the event of loss.
-
Repair services will be provided for defects arising from normal usage for the following period, commencing from the date of purchase from our Authorised Dealer. (Parts would be replaced when necessary)
A. Parts: ……………………………… 1 year
B. Technical service free …………… 1 year -
Under the following circumstances, service and parts will be chargeable even within the warranty period:
A. Failure to present the warranty card and receipt when servicing is required.
Full particulars not clearly shown or alterations made against the actual information.
For e.g.: Alteration of the date of purchase, serial numbers-altered or removed.
B. This unit being tampered with, altered in any way by any unauthorized technicians or which has been subjected to misuse, neg I igence or accident. This guarantee does not cover damage occurring in transit by or from the customer.
C. The defect is caused by the attack of household pests , fire , lighting , natural d is asters, pollution. abnormal voltage or the usage of generator.
Shenzhen Fenda Technology Co .. Ltd.
Add: Fenda Hi-Tech Parl ,Zhoushi Road,Shiyan,Baoan,Shenzhen,China
P,C. : 518108 http://www.fenda.com
WARRANTY TERMS & CONDITIONS
The warranty will be effective only if the warranty card is completed and
returned to the company
within 14 days from the date of purchase.We guarantee the provision of free
services of
product within the warranty period from its date of purchase from our
Authorised Dealer.
The period and conditions of our warranty service are as follow:
-
The warranty covers services by our~ FBD Authorised Dealer. This warranty card together with the receipt must be presented when servicing is required. This warranty card is irreplaceable in the event of loss.
-
Repair services will be provided for defects arising from normal usage for the following period, commencing from the date of purchase from our~ FBD Authorised Dealer. (Parts would be replaced when necessary)
A. Parts: …………………………….. 1 year
B. Technical service free …………… 1 year -
Under the following circumstances, service and parts will be chargeable even within the warranty period:
A. Failure to present the warranty card and receipt when servicing is required.
Full particulars not clearly shown or alterations made against the actual information.
For e.g.: Alteration of the date of purchase, serial numbers-altered or removed.
B. This unit being tampered with, altered in any way by any unauthorised technicians or which has been subjected to misuse, neg I igence or accident. This guarantee does not cover
damage occurring in transit by or from the customer.
C. The defect is caused by the attack of household pests, fire , lighting , natural disasters,
pollution. abnormal voltage or the usage of generator.
Shenzhen Fenda Technology Co., Ltd.
Add: Fenda Hi-Tech Parl,Zhoushi Road,Shiyan,Baoan,Shenzhen,China
P.C. : 518108 http://www.fenda.com