EAGLEND EH02 Wireless Bluetooth Headset User Manual
- June 6, 2024
- EAGLEND
Table of Contents
WIRELESS BLUETOOTH HEADSET
SURROUND STEREO BUSINESS HEADSET
OPERATION MANUAL EHO2
Package Contents
| | |
---|---|---|---
EH02 Bluetooth headphone| Specification| 3.5mm audio cable| USB Type-C
charging cable
Product overview
POWER ON/OFF
MICROPHONE ON/OFF
|
---|---
When calling, the microphone rotates to the angle as shown in the figure.
After hearing “Mic unmuted”, the microphone may give a call.| When calling,
the microphone rotates to the angle as shown in the figure. After hearing “Mic
muted”, the microphone is muted.
Bluetooth callback
-
In startup pairing state:
At the equipment end, find the matching signal of this type and click the name”EH02″ to enter the callback state.
After hearing “Connected”, the blue indicator flashes once every 10s, indicating the successful callback. -
In shutdown state:
After long pressing 3s, it enters the Bluetooth callback mode automatically.
The blue indicator flashes twice, indicating the successful callback. Power on
to enter the automatic callback by default (The last device that already has a
pairing record).
Without Bluetooth connection, the red indicator flashes for a second, and then
the machine automatically turns off.
Charging
A. Battery Low
The red indicator flashes 2 times every 2 minutes. “Battery Low” is reported
every 15 minutes. The machine turns off automatically 15 minutes after the
first prompt.
It is recommended to charge as soon as possible to avoid unnecessary problems.
B.Headphone charging
Tips : The machine can turn on when charging.
Operation description
A.Music operation
B.Call operation
Transfer call: Double-click the power button to transfer to the phone, and double-click the power button again to switch back the headphone. The red and blue indicators are on during the call.
C.Low time-delay game operation
Music Mode: Click three times to switch to music mode. After hearing the
“Music Mode” voice broadcast, it is opened.
Game mode: Click three times to switch to game mode. After hearing the
“Game Mode” voice broadcast, it is opened.
Default to music mode when startup.
D.Busy mode
In the Bluetooth connection state and under the non-busy indication mode,
double-click the power key. The red and blue indicators are on after hearing
“Busy”.
In the Bluetooth connection state and under the busy indication mode, double
click the power key. The LED indicator returns to a normal state after hearing
“normal”.
During the call, the busy light is on, and cannot manually double-click the
power key to turn it off.
E.Other operations
In case of an emergency crash, long-press the power key for 12s to restart the
equipment by force.
In the power-on state, press volume +/- key for is. After hearing
“disconnected”, the pairing list may be removed.
F.Head phone connection (wired)
Use the headphone in wired mode:
- Connect the 3.5mm headphone cord to the headphone interface.
- Insert the 3.5mm headphone cord into the 3.5mm interface of the device.
Headphone parameters
Model EHO2
Headphone battery capacity Lithium battery 3.7V/350mA
Working hours About 14 hours (70% volume)
Charging time About 1.5±0.5 hours
Standby time 200 hours
Input charging standard USB-Type-C, DC5V/1A
Frequency response 20Hz-20KHz
Sensitivity 100±3dB@1KHz
MIC Sensitivity 38±3dB@1KHz (omnidirectional)
Effective Distance Up to 32 meters
Prompt
- Please read this instruction carefully before use of this product, and store the instruction properly;
- Please charge the product fully for the first use ;
- Please charge the idling product (exceeding 2 weeks) ;
- Please select the charger produced by the original or regular manufacturer with the national CCC certification ;
- If the phone cannot search for the Bluetooth headphone, please confirm that the Bluetooth headphone is in “pairing mode”. If the Bluetooth is not paired or connected for a long time, the Bluetooth headphone pairing function will turn off. Please turn on B Bluetooth headphones to “pairing mode”; If the phone program goes wrong, please restart the phone; If the Bluetooth headphone program goes wrong, please restart the Bluetooth headphone or restore the factory settings.
Warning s
- Do not remove or repair the modified headphone for any reason;
- Do not disassemble/put the battery into the fire / short circuit battery positive and negative electrode / soak the battery in water ;
- Do not place the product in a too low or too high (below 0°C or above 45°C) environment;
- Please avoid using product indicators near the eyes of children or animals;
- Do not use the product in thunderstorm weather that can damage the product and increase the risk of electric shock.
Notes: Using headphones for long periods of time can cause hearing damage. Please arrange the use time reasonably; This headphone may not be charged by the charging base exceeding 5.5V, otherwise, it may damage the headphone.
Address
Dongguan Desheng Industrial Co., Ltd.
Address: Block A5, Shichong Industrial Park, Shipai Town, Dongguan City
Website: http://www.eaglend.com/
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>