VISUAL COMFORT CS 3646 Whittaker Medium Table Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT CS 3646 Whittaker Medium Table Lamp
Product Information
The Whittaker Medium Table Lamp, item # CS 3646, is a light fixture that requires assembly. It is important to follow all applicable local installation codes and have a person familiar with construction and operation install the lamp. Before installation, carefully inspect the item and its contents for any damage or defects. Retain all packaging material until installation is complete and approved.
Product Usage Instructions
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Install the harp (C) by squeezing it together and inserting it into the top of the saddle (D).
- Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it onto the harp (C) using the finial (A). If the shade has additional packaging, carefully cut it off from the interior to avoid damages.
- Install a light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the fixture.
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
INSTALLATION INSTRUCTION
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install harp (C) by squeezing together and inserting into top of saddle (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and install to harp (C) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulb into the socket.
-
Remove protective cover (E) from the plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.