Fanvil KT10 Wireless Button User Manual
- June 17, 2024
- Fanvil
Table of Contents
User Manual
KT10 Wireless Button
The KT10 is rebound-type kinetic energy wireless buttons. They utilize patented micro-energy harvesting technology, requiring no battery, and are exceptionally compact in size. These wireless buttons can be paired with Fanvil Y501&Y501-Y series and X305 Big Button IP Phone for equipment control.
Product renderings
Product specification
| Model | KT10 |
|---|---|
| Applicable Models | Y501/Y501-Y Series, X305 |
| Product Dimensions | 21mm51.6mm18.5mm |
| Material | ABS |
| Number of keys | 1 |
| Modulation Mode | FSK |
| Power Supply | Self-powered |
| Communication Protocol | Ebelongl.1 |
| Radio Frequency | 433MHz |
| Operating Life | ≥ 100,000 Times |
| Protection Grade | IP54 |
| Working Temperature | -20∼ +55° C |
| Operate Range | Up to 80m outdoors , Up to 25m indoors |
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
esidential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and sed in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is o guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful nterference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is ncouraged to try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s uthority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable xposure condition without restriction.
The above specifications may be updated in the future without prior notice.
All hardware/software/physical features should be based on the final shipped
products.
For more information, please visit: www.fanvil.com
www.fanvil.com
Add:10/F Block A, Dualshine Global Science Innovation Center,
Honglang North 2™ Road, Bao’an District, Shenzhen, China, 518100
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618
Email: sales@fanvil.comhttp://www.fanvil.com.cn/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>