EPSON ET-1110 Inkjet Printers User Guide

: June 17, 2024
: Epson

Table of Contents

EPSON ET-1110 Inkjet Printers
Product Information
Product Usage Instructions
Frequently Asked Questions
Setup
Unpacking
Charging Ink
Checking Print Quality
Refilling Ink
Connecting to a Computer
Guide to Control Panel
Checking Ink Levels and Refilling Ink
Clearing Paper Jam
Important Safety Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EPSON ET-1110 Inkjet Printers

Product Information

Specifications

Product Name: Printer
Ink Handling: Careful handling is required to prevent ink splatters
Included Items: Additional items may vary depending on location
Ink Bottles: Initial bottles are partly used to charge the print head
Print Quality: Print head cleaning uses some ink from all ink tanks

Product Usage Instructions

Charging Ink

Remove the cap of the ink bottle while keeping it upright to avoid leaks.
Do not knock the ink bottle to prevent leakage.
Use the ink bottles provided with the product for guaranteed quality and reliability.
If the ink does not start flowing into the tank, remove the bottle and try reinserting it.

Checking Print Quality

Turn on the printer.
Hold down the specified button until the power light is on or flashing.
Go to the next section if necessary.

Refilling Ink

Visit the website mentioned to install software.
Alternatively, Windows users can install software using the supplied CD.

Frequently Asked Questions

Q: Are additional items included with the printer?

A: Yes, additional items may be included depending on the location.

Q: Can I use non-genuine ink with the printer?

A: Epson recommends using the ink bottles provided with the product for guaranteed quality and reliability. Non-genuine ink may cause damage not covered by Epson’s warranties.

Q: What should I do if the ink does not start flowing into the tank?

A: Remove the ink bottle and try reinserting it. Do not leave the bottle inserted, as it may be damaged or cause ink leakage.

Setup

Read This First

The ink for this printer must be handled carefully. Ink may splatter when the ink tanks are filled or refilled with ink. If ink gets on your clothes or belongings, it may not come off.

See this guide or Epson video guides for printer setup instructions.

http://epson.sn

Windows users can also set up using the CD supplied. The initial ink bottles will be partly used to charge the print head. These bottles may print fewer pages compared to subsequent ink bottles.

Unpacking

Additional items may be included depending on the location.

Charging Ink

Use the ink bottles that came with your product.
Epson cannot guarantee the quality or reliability of non-genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson’s warranties.

Remove the cap while keeping the ink bottle upright; otherwise, ink may leak.

Do not knock the ink bottle, otherwise the ink may leak.

If the ink does not start flowing into the tank, remove the ink bottle and try reinserting it.
Do not leave the ink bottle inserted; otherwise, the bottle may be damaged or ink may leak.

Checking Print Quality

Refilling Ink

If there is ink remaining in each bottle, refill the ink tank.

Connecting to a Computer

Visit the website to install software. Windows users can also install software using the CD supplied.

http://epson.sn

Guide to Control Panel

Buttons and Functions

Reading the Indication Lights

Checking Ink Levels and Refilling Ink

Check the ink levels. If any of the ink levels are below the lower line, see steps A to H in “2 Charging Ink” to refill the tank.

To confirm the actual ink remaining, visually check the ink levels in all of the printer’s tanks. Prolonged use of the printer when the ink level is below the lower line could damage the printer.

Ink Bottle Codes

Ink bottle codes may vary by location. For the correct codes in your area, contact Epson support. Use of genuine Epson ink other than the specified ink could cause damage that is not covered by Epson’s warranties

Clearing Paper Jam

Back

Inside the Printer

Storing and Transporting

Be sure to keep the ink bottle upright when tightening the cap. Place the printer and the bottle in a plastic bag separately and keep the printer level as you store and transport it. Otherwise ink may leak.
If print quality has declined the next time you print, clean and align the print head

Important Safety Instructions

Use only the power cord that comes with the printer. Use of another cord may cause fire or shock. Do not use the cord with any other equipment.
Be sure your AC power cord meets the relevant local safety standard.
Except as specifically explained in your documentation, do not attempt to service the printer yourself.
Do not let the power cord become damaged or frayed.
Place the printer near a wall outlet where the power cord can be easily unplugged.
Do not place or store the product outdoors, near excessive dirt or dust, water, heat sources, or in locations subject to shocks, vibrations, high temperature or humidity.
Take care not to spill liquid on the product and not to handle the product with wet hands.
Keep ink bottles and the ink tank unit out of the reach of children and do not drink the ink.
Do not shake an ink bottle too vigorously or subject it to strong impacts as this can cause ink to leak.
Be sure to keep the ink bottles upright and do not subject them to impacts or temperature changes.
If ink gets on your skin, wash the area thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If discomfort or vision problems continue after a thorough flushing, see a doctor immediately. If ink gets into your mouth, see a doctor right away.

This guide includes basic information about your product and troubleshooting tips. See the User’s Guide (digital manual) for more details. You can obtain the latest versions of guides from the following website.

For outside Europe