FiiO FB1 Bluetooth Earphone User Manual
- June 17, 2024
- Fiio
Table of Contents
Bluetooth Earphone User Guide
Specifications
Model No. FB1
Bluetooth Version Bluetooth V4.1
Bluetooth Codec aptX.AAC.SBC
Play Time Approx. 8 hrs
Power Supply DC5V500mA
Charging Time <2hrs
Type Dynamic (13mm)
Frequency Response 20Hz20KHz
Weight Approx. 20g
Buttons and Ports Labeled
A. Nol+/Previous track (hold)
B. Indicator (Red/Blue Light)
C. Power on/off/Pair/Play/Pause/Call
D. Vol-/Next track (hold)
E. Micro USB Charging Port
F. Microphone
G. CableClip
H. Ear Hook
List of items included in the package
- Earphone x1pc
- USB charging cable x1pc
- Eartip x3pairs
- Ear hook x3pairs
- User guide x1pc
- Warranty card x1pc
- Carrying case x1pc
Wearing instructions
- Please first install set of eartips and ear hooks of suitable size.
- Putthe earphone into the ear canal
- Adjust the earphone until you feel most comfortable.
How to Use
A. Powering On/Off
- Power On: Hold the button for 3 seconds, the indicator flashes blue 3 times; the FB1 powers on after the notification tone.
- Power Off: Hold the button for 3seconds, the indicator lights red for 2 seconds; the FB1 powers off after the notification tone.
- Reset: Hold the button for 3 seconds when charging; the indicator flashes red and blue simultaneously and the notification tone rings.
Note:
If it’s not connected to any device for 10 minutes after powering on or
disconnect from the device, the FB1will power off automatically tosave power.
B. Pairing
- Pairing with Bluetooth smart phone Before used with the Bluetooth smart phone, the FB1 should be paired with the smart phone with following steps:
- While the FB1 is powered off, hold the button for 5 seconds until the indicator flashes blue and red alternately; the FB1 enters the pairingmode.
- Turn on the Bluetooth function on the smart phone and search for Bluetooth devices. Choose “Fil0 FB1” to pair with it
- Pairing with two Bluetooth devices simultaneously (One-to-two mode)
- Pair the FB1 with Device 1
2)Restart the FB1 and enter pairing mode to pair with Device 2 - Choose “Fii0 FB1” to connect on Device 1. Once done, the FB1 would be connected to the both devices simultaneously already.
Note:
a) How to tum off one-to-two mode: When it’s in sleep mode and not
connectingto any device, hold and simultaneously for about 4 seconds untilthe
notification tone is heard
b) How to turn on one-to-two mode: When itsin sleep mode and not connectingto
any device, hold and simultaneously for about 4seconds until the notification
tone is heard.
C. Making Phone Calls
-
Basic Operation
Cancel the dialing: Press button briefly once
Answer a call:Press button briefly once
Decline a call:Hold button for 2 seconds
Enda call:Press button briefly once
Volume up:Press button briefly
Volume down:Press button briefly
Switch the call to the Phone:Hold button for 2 seconds.
Switch the call to the FB1:Hold button for 2 seconds
Mute the microphone: Hold button for 2 seconds
Unmute the microphone:Hold button for 2 seconds
Last number redial: Double press button -
Three-way calling
End the first call and answer the new one: Press button briefly once
Put the first call on hold and answer the new one:
Double press button
Switch between calls: Double press button
End the second call and switch to the call on hold:
Press button briefly once -
Answer phone calls when connected to two phones
End the call on the first phone and answer the new call on the
second phone: Press button briefly once
Put the call on the first phone on hold and answer the new call
onthe second phone:Double press button
Switch between calls from different phones:
Double press button
End the current call and switch to the call on hold
Press button briefly once
Indicator
Pairing mode: Flash blue and red alternately
Not connecting to any device: Flash blue twice every 2 seconds
Connected successfully: Flash blue once every 2.5 seconds
Low battery: Flash red
Charging: Red light stays steadily on
To learn more about the product, please visit our website:
wwwfiio.net.