MOOER PRIME S1 Intelligent Pedal User Guide
- June 17, 2024
- Mooer
Table of Contents
MOOER PRIME S1 Intelligent Pedal User Guide
Features
- Light-weight and portable design
- Integrated lithium battery with support of mobile power bank charging
- 126 guitar effects
- Comes with a tuner, metronome (x10), drum machine (x40), looper (80 seconds)
- USB/OTG function for directly recording via mobile device
- Individual headphone output
- Two main outputs allow users to set stereo connections
- Preset switching, drum machine, and looper can be controlled via footswitch smoothly
- Specialized App for mobile device MOOER Cloud can help users to share and download tones easily
- MOOER Cloud can help users to share and download tones easily
- The S1 is an intelligent platform and can be transformed into other effect modules via download and installing different firmware
- High-quality Bluetooth audio function
Specifications
Input: 1/4″ mono audio jack, 2M ohm
Output: 1/4″ mono audio jack, 100 ohm
Headphone output: 1/8″ stereo audio jack, 32 ohm
USB cable: USB-C to USB-Acable
Bluetooth version: 5.0 Battery capacity: 2000mAh
Duration time : 4.5 hours
Charging requirements: DC 5V/2A
Wireless system : 2.4G
Weight : 350g
Dimensions : 240mm (D) x 70.2mm (W) x 31.9mm (H)
Accessories: Quick Guide, USB cable, Nylon Bag
Quick Guide
PRECAUTIONS
*PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
- Please use a power supply that meets UL, CSA, VED, or CCC standards
- Please use the power supply that meets manufacturer’s power requirement
- Please unplug the power supply when the device is turned off or a during thunderstorm
- Please do not expose the device which has battery power to heat or let it overheat
- If battery leakage occurs, please do not touch the liquid with your skin or eye. If you do come in contact, please see a doctor
- The battery included with with the device may cause fire or chemical burns if handled improperly
Location
To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:
- Direct sunlight
- Extreme temperature or humidity
- Excessive dusty or dirty location
- Magnetic fields
- High humidity or moisture
- Strong vibrations or shocks
Layout
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleaners, cleaning alcohol, paint thinners, wax, solvents,
cleaning fluids, or chemical-impregnated wiping cloths.
Start
Power On the S1, the I/O indicator will illuminate, please set up the connection according to the diagram.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement