NEUTRIK NE8FDPS-TOP EtherCON Airtight Instruction Manual
- June 17, 2024
- NEUTRIK
Table of Contents
NE8FDPS-TOP EtherCON Airtight
PRODUCT MANUAL
Example (NE8FDPS-TOP) of
preassembled Delivery.
etherCON® TOP airtight
NE8FDPS-TOP & NE8FDIS-TOP & NE8FDPU-TOP
Example of etherCON TOP Unmated connection options
1 Connector installation
Step 1: Combine connector parts
A Combine flange and sealing cap
PRODUCT MANUAL – etherCON TOP airtight ® chassis connector
Step 2: Assembly
B Insert the receptacle from the front into the panel.
C Position the screw and fasten it.
D ATTENTION :
Tightening torque MA = 40 – 50 Ncm
N O T E : L u b r i c a t e s e a l i n g l i p w i t h
s i l i c o n f r o m t i m e t o t i m e .
2 Additional information
PRODUCT MANUAL – etherCON® TOP airtight chassis connector
3 Application and Safety Instructions
A Assembly
-
When assembling and processing the product, ensure the use of appropriate personal
protective equipment. -
Neutrik components must only be assembled with designated and specified components.
-
Replacement parts are suitable only when used in combination with the designated
components. The product’s characteristics are guaranteed only in the intended combination.
B Application
- The product is exclusively intended for installation in electronic equipment or similar devices.
- The product is not intended for use in medical applications.
- The product is not intended for use in potentially explosive or flammable environments.
C Operation
-
Before plugging in, check the contact area for dry surfaces.
-
Product surfaces may cause burns at elevated ambient temperatures. Ensure the use of appropriate
protective equipment. -
Neutrik products should only be combined with products from Neutrik Group brands.
D Cleaning
- Clean only with dry and lint-free materials or compressed air.
- The product must not be cleaned while under load. The product may only be cleaned while it is not
connected to any voltage and without the use of cleaning agents.
E Damages
- Handle products with care.
- In case of visible damages, check the suitability of the product for use.
https://www.neutrik.com/en/products/audio/ethercon
Data subject to change without prior notice. 2023 NEUTRIK . NEUTRIK are registered trademark of Neutrik AG. © ® ® ALL RIGHTS RESERVED.
Document No.: BDA 692 V1
Date: 2023-12-04
Neutrik AG I LI-9494 Schaan