hp M601n Enterprise 600 Printer Installation Guide

June 17, 2024
HP

hp M601n Enterprise 600 Printer

Product Information

Specifications

  • Product : LaserJet Enterprise M601, M602, M603
  • Power Source : 100-127 Vac or 220-240 Vac, 50/60 Hz

Product Usage Instructions

Installation

  1. Connect the power cord between the product and a grounded AC outlet.
  2. Turn on the product.
  3. Set the language and the date/time on the control panel.
  4. Caution: Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label. The product uses either 100-127 Vac or 220-240 Vac and 50/60 Hz. To prevent damage to the product, use only the power cord that is provided with the product.

Additional Information
For more product and problem-solving information, please refer to the User Guide or visit www.hp.com/support/lj600QSeries.

FAQ

  1. Q: Where can I find more information about the product or troubleshoot issues?
    A: You can refer to the User Guide or visit www.hp.com/support/lj600QSeries for more information and problem-solving.

LASERJET ENTERPRISE M601, M602, M603

Installation Guide

Select a sturdy, well-ventilated, dust-free area, away from direct sunlight to position the product.

hp-M601n-Enterprise-600-Printer-IMAGE-2 hp-
M601n-Enterprise-600-Printer-IMAGE-3 hp-
M601n-Enterprise-600-Printer-IMAGE-4 hp-
M601n-Enterprise-600-Printer-IMAGE-5

Caution! Do not connect the USB cable until prompted during software installation (CD).

hp-M601n-Enterprise-600-Printer-IMAGE-7

Connect the power cord between the product and a grounded ac outlet. Turn on the product. On the control panel, set the language  and the date/time.

Caution: Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label. The product uses either 100-127 Vac or 220-240 Vac and 50/60 Hz. To prevent damage to the product, use only the power cord that is provided with the product.

hp-M601n-Enterprise-600-Printer-IMAGE-8

For more product and problem-solving information go to the User Guide or
www.hp.com/support/lj600QSeries

  • www.hp.com
    • Copyright and License
    • © 2011 Copyright Hewlett-Packard Development Company, L.P.
  • Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws.
  • The information contained herein is subject to change without notice.
  • The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for  technical or editorial errors or omissions contained herein.
  • Part number: CE988-90939
  • Edition 2, 11/2011

FCC Regulations

  • This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
    NOTE: Any changes or modifications to the printer that are not expressly approved by HP could void the user’s authority to operate this equipment. Use of a shielded interface  cable is required to comply with the Class A limits of Part 15 of FCC rules.

  • Trademark Credits

  • Windows® is a U.S. registered trademark of Microsoft Corporation.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals