hp 2802 OneShred 12CC Shredder Instructions

hp 2802 OneShred 12CC Shredder

Product Information: OneShred 12CC

The OneShred 12CC is a shredder designed for private use indoors. It is capable of shredding paper, credit cards, paper clips, and staples. The shredder has an insertion mechanism that can cause injury if loose items such as fingers, hair, scarves, ties, or jewelry get caught in the insertion slot. The device is not intended for any other use except for private indoor use and any unauthorized modifications or reconstructions are not allowed and may void the guarantee. The shredder comes with an operating manual that contains more detailed information, including technical data, which is available online at www.hp.com/officeequipment.

Intended Use

The OneShred 12CC is exclusively intended for private use indoors. Any other use is considered unintended use. The shredder is designed to shred paper, credit cards, paper clips, and staples. Unauthorized modifications or reconstructions are not permitted and lead to loss of rights to claims under the terms of guarantee.

Safety Information

It is important to read and observe all warnings to protect yourself and the environment from any harm. Children can swallow or choke on small parts, packaging, and protective foils, so the device and its packaging materials should be kept out of reach of children. The shredder can be used by children from the age of eight and persons with restricted physical, sensory, or mental capabilities or a lack of experience and/or knowledge when they are supervised or have been instructed with regard to safe use of the device and the risks involved with its use. Children must not be allowed to play with the device or complete any cleaning or service work on the device without adequate supervision.

Usage Instructions

1. Read the operating manual carefully before using the device and keep it close by for future reference.
2. Ensure that all loose items such as fingers, hair, scarves, ties, or jewelry are kept away from the insertion slot to prevent injury.
3. Keep the device and its packaging materials out of reach of children.
4. Make sure the power cable is properly laid to avoid tripping and damage to the cable and power plug.
5. Avoid exposing the device to environmental influences such as smoke, dust, vibration, chemicals, moisture, heat, or direct sunlight to prevent property damage.
6. Use the shredder only in indoor rooms and within the permissible ambient conditions stipulated in the Technical Data.

Read the Operating Manual

Read this operating manual through carefully, observing all the information contained regarding handling and using the shredder. Keep the operating manual close by for future reference.
An operating manual containing more detailed information, such as technical data, is available online at the following website: www.hp.com/officeequipment

Intended Use

The shredder has been designed to shred paper, credit cards, paper clips and staples. The shredder is exclusively intended for private use indoors.
Any other use is considered unintended use. Unauthorised modifications or reconstructions are not permitted and lead to loss of rights to claims under the terms of guarantee.

Observe the Safety Information

Read and observe all the warnings to protect yourself and the environment from any harm.

Warning!
Risk of injury through the insertion mechanism. Loose items could get caught in the insertion slot and cause injuries. Keep fingers, hair, scarves, ties, jewellery etc. away from the insertion slot.

Warning!
Risk of injury through electric shock. Handling the shredder improperly could lead to an electric shock. Unauthorized modifications or reconstructions to the shredder are not permitted. Do not op-erate the shredder if the power cable is damaged. Switch off the shredder immediately in the case of damage or improper functioning and disconnect the power plug. Repairs may only be carried out by properly qualified specialists. Pay attention that the shredder is set-up in the vicinity of an easily accessible power socket so that the shredder can be disconnected from the power supply in an emergency. Never handle the shredder with wet hands. Avoid any contact with water. Always unplug the power plug when the device is not being used. Only use the power cable supplied.

Warning!
Risk of suffocation due to small parts, packaging or protective foils. Children can swallow or choke on small parts, packaging and protective foils. Keep the device and its packaging materials out of reach of children.

Warning!
This device can be used by children from the age of eight and persons with restricted physical, sensory or mental capabilities or a lack of experience and/or knowledge when they are su-pervised or have been instructed with regard to safe use of the device and the risks involved with its use. Children must not be allowed to play with the device. Children must not be allowed to complete any cleaning or service work on the device without adequate supervision.

Caution!
Risk of tripping due to improperly laid power cable. Lay the power cable in such a way that nobody can trip over it. Make sure the power plug and cable cannot be damaged.

Important!
Risk of property damage. Avoid exposing the device to environmental influences such as smoke, dust, vibration, chemicals, moisture, heat or direct sunlight. Only use the shredder in indoor rooms and within the permissible ambient conditions stipulated in the Technical Data. Observe the following information to ensure that the shredder always functions as you expect it to.

• Read the operating instructions thoroughly before starting to use the device.
• Keep long hair away from the shredder.
• Keep all loose pieces of clothing, jewellery or other loose items away from the shredder.
• Keep ties and scarves away from the shredder.
• General indication of potential risks, so that particular care is required.
• Warning! This equip-ment is not intended for use by children. Avoid touching the media feed opening with the hands, clothing or hair, Unplug this equipment when not in use for an extended period of time. Hazardous moving part is in this equipment, keep body parts away from moving parts.
• Never reach into the insertion slot.
• Keep children and pets away from the shredder.
• Do not spray any in-flammable gases in the direction of the shredder. Never use air sprays.
• Insert a maximum of 12 sheets into the shredder at one time.
• Caution! Risk of injury through sharp edge of cutting mechanism!
• Credit cards must be inserted vertically.
• Only use the product indoors.
• The symbol indicates that the design of the product complies with Protection Class II (double insulation). A safety connection to the electrical earthing (ground) is not necessary.
• The «Geprüfte Sicherheit» mark (GS tested safety mark) certifies that the product satisfies the requirements defined by the German Product Safety Act (ProdSG).
• The GS tested safety mark indicates that when implemented for its intended use and in the event of foreseeable misuse the identified product will not endanger the safety and health of the user. It
  concerns a voluntary safety mark that was issued by an authorized testing institute.

Checking the Package Contents

Check the package contents of your shredder before putting the shredder into operation.
If anything is missing or damaged, do not use the shredder. Contact our Service department.

• OneShred 12CC shredder with waste bin for cuttings
• Operating manual
• 1 oiled sheet

General View of the Shredder

The following figure illustrates the shredder in detail.

1. Operating buttons / Status indicator
2. Insertion slot
3. Shredder attachment
4. Grip
5. Viewing window
6. Waste bin

1. Reverse running
2. On/Off button
3. Forward running
4. Overheating
5. Overloading

Positioning the Shredder and Starting It Up

The shredder only operates when the waste bin supplied is fitted. Do not position the shredder near any sources of heat and maintain a distance of at least 10 cm to walls. This ensures the shredder is sufficiently cooled.

1. Set the shredder down on a stable, level, horizontal surface and in the vicinity of an easily accessible power socket.

2. Mount the shredder attachment on the waste bin. The shredder attachment latches audibly in place. If the shredder attachment is not fitted properly on the waste bin, the shredder cannot be switched on.
   Only use the power cable supplied.

3. Connect the power cable to the device.

4. Connect the power plug to a power socket.

5. Switch the device on by pressing the On/Off button.

   • The status indicator lights up blue.
   • You have put the shredder into operation.

The status indicator on the shredder lights up blue when switched on, flash-es red in the event of a paper jam and lights up red if the shredder overheats.

Operating the Shredder

The shredder works using an automatic shredding mechanism. The shredder is operated using the operating but-tons on the top of the device.

Shredding Material Automatically

Observe the maximum permissible cutting capacity of 12 sheets.

Warning! This equipment is not intended for use by children. Avoid touching the media feed opening with the hands, clothing or hair, Unplug this equipment when not in use for an extended period of time. Hazardous moving part is in this equipment, keep body parts away from moving parts.

Important! Risk of property damage through material jam! Observe the maximum cutting capacity of the insertion slot.

1. Feed the material to be shredded in the centre of the insertion slot.
   The insertion slot draws the material in automatically and stops when no more material is fed in.

Switching the Shredder Off
Switch the shredder off when you no longer need to use it.

1. Switch the device off by pressing the On/Off button.
   The shredder is switched off.

2. Disconnect the power plug from the power socket if the shredder will not be used for a longer period of time.

Emptying the Waste Bin
Check the fill level of the waste bin through the viewing window at regular intervals and when it is about 80% full, empty it. This prevents the shredded material from accumulating, which could lead to malfunctions.

1. Switch the device off by pressing the On/Off button.

2. Disconnect the power plug from the power socket.
   Caution! Risk of injury through sharp edge of cutting mechanism! The underside of the cutting mechanism has sharp edges and corners. Only take hold of the cutting mechanism by the grips.

3. Lift the shredder attachment from the waste bin.

4. Empty the waste bin.
   Caution! Risk of injury through sharp edge of cutting mechanism! The underside of the cutting mechanism has sharp edges and corners. Only take hold of the cutting mechanism by the grips.

5. Mount the shredder attachment on the waste bin.

6. The waste bin latches audibly in place.

Technical Data

Power supply| 220-240 V~,

50/60 Hz, 1.4 A,

300 W

---|---
Continuous operation (min) / Cool down phase (min)| 6 / 50
Max ambient temperature [°C]| 25

We declare that this device, with regard to its task of the destruction of docu-ments, fulfils the conditions defined for Security Level P-4 in accordance with DIN 66399.
P-4: Recommended for data media containing particularly sensitive and confidential data. Material particle area ≤ 160 mm² and for consistent partic- les: strip width ≤ 6 mm (e.g. particles 4 x 40 mm).

Disposal

• Find out about the possibilities of taking back used appliances free of charge from your dealer.

• The adjacent symbol indicates laws dictate that electrical and electronic apparatus no longer required must be disposed
  of separate from domestic waste. Dispose of your device at a collection point provided by your local public waste authority. Packaging materials must be disposed of according to local regulations.

• Observe the identification on the packaging materials during the waste sorting process; they are identified by abbreviations (b) and numbers (a) which have the following significance: 1–7: plastic/20–22: paper and cardboard/80–98: composite materials.

• Packaging materials must be disposed of according to local regulations.

• The packaging is made of environmentally friendly materials that you can dispose of at local recycling points.
  Advice on the options with which to dispose of your old device can be obtained from your municipal or local administration offices.

• The device and packaging materials can be recycled; sort them for disposal to simplify waste management.
  The Triman logo is only relevant for France.

• The device and the packaging material can be recycled, so sort them prior to disposal for better waste management. Contact your local authorities for information on the various options available to ensure correct disposal. Observe the following identifications of the packaging materials: (a) numbers, (b) abbreviations and (c) materials which have the following significance: 1–7: plastics / 20–22: paper and cardboard / 80–98: composite materials and (d) type of packaging. The logo is only applicable to Italy.

Queries and Service

Dear customer,
we are delighted that you have chosen this equipment.
In the case of a defect, please return the device together with the receipt and original packing material to the point of sale.
Further information is available under the heading Contact & Service on our website: www.hp.com/officeequip-ment.

Declaration of Conformity

The CE Mark on the device confirms conformity.
The UKCA mark on the device confirms its conformity.

The Declaration of Conformity can be read online at www.hp.com/officeequipment.

Manufacturer

GO Europe GmbH Zum Kraftwerk 1 D-45527 Hattingen Germany

References

• HP Office Supply - Best Official HP Products & Supplies
• Laptop Computers, Desktops, Printers, Ink & Toner | HP® Official Site
• HP Office Supply - Best Official HP Products & Supplies

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>