hp M601 Laserjet Enterprise Printer Installation Guide
- June 17, 2024
- HP
Table of Contents
LASERJET ENTERPRISE M601, M602, M603
Installation Guide
M601 Laserjet Enterprise Printer
Select a sturdy, well-ventilated, dust-free area, away from direct sunlight to position the product.
Caution! Do not connect the USB cable until prompted during software installation (CD).
Connect the power cord between the product and a grounded ac outlet. Turn on
the product. On the control panel, set the language and the date/time.
Caution: Make sure your power source is adequate for the product voltage
rating. The voltage rating is on the product label. The product uses either
100-127 Vac or 220-240 Vac and 50/60 Hz. To prevent damage to the product, use
only the power cord that is
provided with the product.
For more product and problem-solving information go to the User Guide or www.hp.com/support/lj600QSeries
Copyright and License
© 2011 Copyright Hewlett-Packard Development Company, L.P.
Reproduction, adaptation or translation without prior written permission is
prohibited, except as allowed under the copyright laws. The information
contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be
liable for technical or editorial errors or omissions contained herein.
Part number: CE988-90939
Edition 2, 11/2011
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
NOTE: Any changes or modifications to the printer that are not expressly
approved by HP could void the user’s authority to operate this equipment. Use
of a shielded interface cable is required to comply with the Class A limits of
Part 15 of FCC rules.
Trademark Credits
Windows® is a U.S. registered trademark of Microsoft Corporation.
References
- Laptop Computers, Desktops, Printers, Ink & Toner | HP® United Kingdom
- hp.com/support/lj600QSeries
- Manual-Hub.com – Free PDF manuals!