INTERPHONE GPSANGEL 20 Vehicle GPS Tracker User Guide

June 16, 2024
Interphone

INTERPHONE GPSANGEL 20 Vehicle GPS Tracker
INTERPHONE GPSANGEL 20 Vehicle GPS Tracker

To ensure quickly and correctly use, please read this manual carefully before using. Any changes to the product appearance, color or accessories are without notice.

To operate its features, this device needs a SIM card, enabled for VOICE and GPRS traffic.

Product Features

Main Functions

  • Real-time tracking
  • Geo-fence
  • Power off alert
  • Movement alert
  • Intelligent power saving
  • Vibration alert
  • Remotely control electricity/petrol
  • Low battery alert

Specifications

Frequency GSM 850/900/1800/1900MHz
GPRS Class 12, TCP/IP
Operating Voltage 7-18VDC
Location Time Cold start: <35s

Hot start: <2s
Location accuracy| <10 meters
Operating temperature| -20°C— +70°C
Dimension| 80(L) x 43(W) x 13(H) mm
Weight| 48.5g

Appearance

Appearance

LED indicators

GPS LED Indicator – Blue

| Blinking| Searching GPS signal
| Blinking slowly| GPS positioned
| OFF| GPS sleep or off
GSM LED Indicator – Green

| Blinking| GSM initializing
| Blinking slowly| GSM working/GPRS Online
| Solid green| Calling on the line
| OFF| No GPS signal or SIM signal
Power LED Indicator – Red

| Blinking| Low battery
| Blinking slowly| Full charged/Working
| Solid red| Charging process
| OFF| Low battery/Internal error
| Blink in a loop| Device is arming status
---|---|---

Wiring & Installation Instructions

Installation

Assistance from professional services is recommended.
Ignition key connection is mandatory, this signal activate and decactivate the arming of device. When ignition key is on, device is not armed and some alarms are disabled. When ingnition key is off, after a timeout, all alarms are active.

Notes:

  • Stay away from water
  • Use double-side tape and cable tie to fix
  • Place side with Interphone logo UP.

Installation

Wiring Definition

No. Definition Color Illustration
1 V+ Red Positive pole (9-18V)
2 V- Black Negative pole
3 ACC Orange Ignition key signal
4 Relay Yellow Power cutoff (relay needed)

Wiring

  1. Standard connection
    Wiring

  2. Fuel pump remote control connection
    Wiring

Switch ON/OFF

  1. Remove the surface cover

  2. Insert the SIM card

  3. Toggle the battery switch to ON
    Switch ON/OFF

  4. Place the cover back and connect to external power that will supply power for the battery.
    Switch ON/OFF

Function

  1. Power cut-off alert
    When the power supply is disconnected, it will activate cut-off alarm and alert will be sent to preset SOS number.

  2. Low battery alarm
    When battery is in low level, the device will activate low battery alarm.

  3. Vibration alert
    When vehicle is moved or fall down, the vibration alarm will be triggered. The device will send vibration alarm message immediately.
    Notice:
    Ignition key line should be connected correctly; otherwise, false alarm may arise.
    Default ON. Turn ON/OFF by SMS or APP.
    For vehicle towing or transportation, turn off this alarm.

  4. Geo-fence alert
    In APP, you can geo-fences in specific area. When the device enters or exits specific areas, it will send alarm to APP.

  5. Movement alert
    Device will send movement alarm when vehicle moves out the pre-set distance (when Ignition key is off and GPS is fixed).
    Notice:
    SMS alert is available only if SOS number is set.
    Default OFF. Turn ON/OFF by APP

  6. Petrol/Electricity cutoff
    Petrol/Electricity cutoff is to disconnect the fuel pump power supply or starting motor to stop the vehicle.
    This function requires installation of the provided relay. User can send command by APP to cut off or restore power.

  7. Battery Protection
    When the motorcycle’s battery voltage decreases to a certain value, the battery protection function will be activated. Device will transfer to power saving mode after low battery alert is sent.
    In power saving mode, the device is offline, GPS is off and vibration alert still works.

Notice:
This function requires correct connection with the Ignition key wire (Ignition key wire can’t be connected to constant electric); otherwise, device can’t wake up in battery protection status.

Download APP

Please download and install the APP GPSANGEL, APP store or Google Play store.

iOS
Android

Create your account and associate your device with the APP.

SMS command

Set the SOS number (it’s the vehicle owner phone number) to use SMS command and receive SMS alerts. SMS command can be sent only from SOS registered number. This operation can be done via APP.

Trouble shooting

If you are having trouble with your device, try these troubleshooting procedures before contacting our customer care.

Problems Causes Solutions
Poor signal The signal waves unable to transmit when use the GPS tracker in

the places that have poor signal reception, such as: tall building around or basement.| Using the GPS tracker in the places that have good signal condition.
Unable to boot| Low battery| Charge the device battery
Unable to connect to the network| SIM card inserted incorrectly| Check SIM card
Dirty things exist above the SIM card| Clean SIM card
Invalid SIM card| Contact network supplier
Not in GSM service area| Move to service area
Poor signal| Move to area with strong signal
Unable to Charge| Poor contact| Check power cable
Fail to locate| SIM has no access to GPRS| Contact network supplier to get GPRS service
Always reply “Address inquiry failed”| Contact supplier

SMS Command List

Type SMS command indicated in the right column of following table to the device SIM number to achieve respective function as below:

1 Device status STATUS#
2 Device coordinate WHERE#
3 Location URL URL#
4 Check version VERSION#
5 Network setting GPRSSET#
6 APN setting
  1. APN, [apnname]#
    E.g: APN,internet#

  2. APN, [apnname],[user],[pwd]#
    E.g: APN,internet,CLIENTE,AMENA#

7| Server setting| SERVER,mode,domain/IP,port,0#
E.g. SERVER,1,www.ydpat.com,8011,0# SERVER,0,211.154.135.113,8011,0# mode1 means set with domain name mode 0 means set with ip addre
8| SOS setting|

  1. Add SOS number:
    SOS,A,number 1,number 2,number 3#

  2. Delete subjected sequence of SOS number:
    SOS,D,number sequence 1, number sequence 2, number sequence 3#
    E.g. SOS,D,1,2,3#

  3. Delete the SOS number:
    SOS,D,phone number#

  4. Query SOS number: SOS#

9| GPS data upload time interval| TIMER,T1,T2#

T1=5~18000 seconds;ACC ON upload interval;default value:10
T2=5~18000 seconds;ACC OFF upload interval;default value:10 (when GPS is not sleep)

10| GPS data upload distance interval| DISTANCE,D#

D=0, 50~10000 meter;
Distance interval; default value: 300, unit: meter;

11| Delayed defense setting| DEFENSE,A#
A:1~60 minutes, set delayed defense, default value: 5 minutes
---|---|---
12| Vibration alarm (default OFF)|

  1. SENALM,ON#
  2. SENALM,OFF#

13| Displacement alarm setting (default OFF)|

  1. MOVING,ON,R,M# R=100~1000; Displacement radius, unit: meter
    M=0-2; Alert way 0:GPRS~1:SMS+GPRS;
    2: GPRS+SMS+CALL
    E.g. MOVING,ON,200,2#

  2. MOVING,OFF#

14| Set center number| Set center number : CENTER,A,mobile number# Delete center number: CENTER,D#
15| Power/oil control (center number is used for fuel cut off command)| RELAY,A#
A=0/1
0= restore petrol; 1=cut off petrol Default value: 0
E.g. RELAY,1#
16| Restart| RESET#
Device restart 20 seconds after receiving this command

EN – Cellularline S.p.A., declares that this device complies with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following address:
www.cellularline.com/_/declaration-of- conformity Cellularline S.p.A., also declares that this device complies with the RoHS Directive 2011/65/EU.

EN – INSTRUCTIONS FOR THE DISPOSAL OF APPLIANCES FOR DOMESTIC USERS
(Applicable in countries in the European Union and those with separate waste collection systems)
This mark on the product or documentation indicates that this product must not be disposed of with other household waste at the end of its life. To avoid any damage to health or the environment due to improper disposal of waste, the user must separate this product from other types of waste and recycle it in a responsible manner to promote the sustainable re-use of the material resources.
Domestic users should contact the dealer where they purchased the product or the local government office for all the information regarding separate waste collection and recycling for this type of product.
Corporate users should contact the supplier and verify the terms and conditions in the purchase contract.
This product must not be mixed with other commercial waste.
This product has a battery than cannot be replaced by the user. Do not attempt to open the device to remove the battery as this could cause malfunctions and seriously damage the product. When disposing of the product, please contact the local waste disposal authority to remove the battery. The battery inside the device was designed to be able to be used during the entire life cycle of the product.

Cellularine S.P.A

Via Lambrakis 1/A, 42122 Reggio Emilia, Italy
www.cellularline.com

Company Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals