intelbras XSA 1000 Universal Bracket Motion User Guide

User’s Manual
XSA 1000
XSA 1000 BLACK

XSA 1000 / XSA 1000 BLACK

Universal Support
Congratulations, you just have purchased a product with Intelbras quality and safety.
The XSA 1000 / XSA 1000 BLACK universal support was structured to fit perfectly in most presence sensors available in the market and other equipments with compatible features,  and also have a wide direction angle, support to wiring passage and UV protection for installing in outdoor environments.

Caution and safety

• Follow all instructions of the manual for product mounting and installation.
• Make sure that both the sensor and support are firmly seated in the installation place in order to avoid changes to the product detection angle.
• Make sure that the installation location is stable and shake-free place.
• We recommend the installation to be executed by a professional installer, because the improper use of the articulator may impair the PET function and the coverage angle of the presence sensor.

Technical specifications

General features

Product

Components

 Features

• Made of UV protected material;
•  Easy to install;
• Wide application scenario;
• Compatible with most presence sensors available in the market and other equipments for the same applications and purpose.

Compatibility list

The compatibility list with Intelbras sensors is as follows: IVP 2000 SF, IVP 3000 MW PET, IVP 3000 CF, IVP 3000 MW EX, IVP 3021 SHIELD, IVP 7001 MW EX, IVP 4000 SMART, IVP 7001 MW PET, IVP 4101 PET SMART, IVA 3015 X, IVP 5001 PET, IVA 3070 X, IVP 5001 PET SHIELD, IVA 3110 X, IVP 5002 PET, IVP 3000 PET, IVP 5311 MW PET, IVP 3000 MW, IVP 5301 PET PRO, IVP 8000 PET, IVP 8000 EX, IVP 8000 PET CAM and IVA 5015 DIGITAL.

 Installation

• Screw the ring into the product base till it is well attached, but not definitively, because the sensor position can be adjusted when the installation is completed (part 4).
• Insert the nut into the upper base fitting and then, attach it in the sensor or product, using screws supplied with the product (parts 5, 6 and 7). Screw the upper base with the sensor attached in the axle till it is firmly positioned.
• To attach to the Base in the definitive installation place, follow these steps:
•  Guide the wiring through the wire entry;
•  Attach the wire through two inner locks for wire attachment;
• Guide the wire through the hole at the center of the base toward the inner portion of the product to be attached.

Note: it is important to use locks for wiring attachment, because they prevent water from entering inside the sensor, along the wiring.

• If the sensor is installed on a flat surface, use innermost four holes in the fixation base. If the sensor is used in a 90° corner, use the outermost four holes in the base.
• The fastening tabs in the corner can be easily detached when they are not used.
• After the base is definitely attached, direct the sensor to the desired detection  field, always according to the specifications. Lock the sensor position turning clockwise the fixing ring till it is firmly attached.

Term of Warranty
It is expressed that this contractual warranty is granted according to the following conditions:
Customer name:…
Customer’s signature:……….
Tax Invoice No………….
Date of Purchase:…………
Model: Serial No.:………….
Retailer……………………

1. All parts, pieces and components of this product are warranted against any manufacturing defects, which may arise within a period of 1 (one) year – being 90 (ninety) days of legal warranty and 9 (nine) months subject to contractual warranty – from the date when the Customer purchased the product, according to the product purchase tax invoice, which is an integral part of this Term throughout the Brazilian territory. This contractual warranty expressly includes the product exchanges in case of manufacturing defect. If no manufacturing defect is confirmed, but there is a failure due to improper use, the Customer shall bear any of these incurred expenses.
2. The product must be installed according to the Product Manual and/or Installation Guide. If your product requires to be installed and configured by a skilled technician, your should seek for a reliable and skilled professional, but the costs of such services are not included in the product price.
3. Once the defect is confirmed, the Customer shall contact immediately the nearest Authorized Service listed in the report provided by the manufacturer, they are the only professionals authorized to check and remedy the defect within the warranty term provided herein. It it is not observed, the warranty is void, characterized as product infringement.
4. Eventually, if the Customer requests service at home, he/she may contact the nearest Authorized Service to ask for fee quotation of a technical visit. If it is necessary to withdraw the product to be repaired, the incurred expenses such as transpor tation and insurance costs, including taking and return after repaired, are under responsibility of the customer.
5. The warranty will be entirely voided if any of the following cases occur: a) if the defect is not due to manufacturing, but caused by the Customer or by third parties foreign to the manufacturer; b) if the product damages are caused by accident, disasters, agents of nature (lightning, flooding, landslide, etc.), humidity, network voltage, over-voltage caused by accident or excessive network voltage fluctuations), installation/use in disagreement with the user’s manual or due to natural wear of parts, pieces and components; c) if the product had suffered any effects of chemical, electromagnetic, electric or animal (insects, etc.) nature; d) if the product serial number was altered or erased; and e) if the appliance is flawed.
6. . This warranty does not cover data loss, therefore, in case of a product, it is advisable to the Customer to regularly make secure backup of the product data.
7. Intelbras is not liable for the installation of this product, as well as eventual at- tempts of fraud and/or sabotage in their products. Keep software and applications up to date, and if necessary, the required network protections against intrusions (hackers). The equipment is warranted against defects under normal conditions of use, and it is important to bear in mind that, because it is an electronic equipment, it is not protected from attempts of frauds or misleading actions that may interfere in its correct operation,
8. After its useful life, the product must be delivered to an Intelbras authorized support service or perform environmentally proper final disposal in order to avoid environmental or health impacts. If you prefer, useless cells and batteries as well as other Intelbras branded electronic appliances may be disposed at any Green Eletron collection points (electro-electronic residues management company to which we are associated). If you have any questions about the reverse logistics process, contact us by phone (48) 2106-0006 or 0800 704 2767 (from Monday to Friday at 8 AM to 8 PM, and on Saturday at 8 AM to 6 PM) or via e-mail suporte@intelbras.com.br.

Also under these supplementary Term of Warranty, Intelbras S/A reserves the right to alter general, technical or aesthetics features without prior notice.
The manufacturing process of this product is not subject to ISO 14001 requirements. All images in this manual are for illustrative purposes only.

Customer Support: (48) 2106 0006
Forum: forum.intelbras.com.br
Support via chat: intelbras.com.br/suporte-tecnico
Support via e-mail: suporte@intelbras.com.br
Customer Service: 0800 7042767
Where to buy? Who installs it? 0800 7245115
Produced by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira
Rodovia BR 459, km 124, 1325 – Distrito Industrial – Santa Rita do Sapucaí/MG – 37540-000
CNPJ 82.901.000/0016-03 – www.intelbras.com.br
01.21
Made in Brazil

References

• Fórum Intelbras - Índice
• intelbras.com.br
• intelbras.com.br/suporte-tecnico
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>