Yixi Y102X 300m Helmet Bluetooth Headset Instruction Manual
- June 16, 2024
- Yixi
Table of Contents
Yixi Y102X 300m Helmet Bluetooth Headset
V/ 10 2X INSTRUCTION MANUAL FOR INTERCOM VERSION I
Product overview
Important Notice
Before installing the headphones, follow the Quick Manual instructions to connect your phone and listen to the sound and volume. If there is a large difference in sound effect and volume after installing it on the helmet, please adjust the position of the speaker in the helmet.
Phone Features
Double-click to toggle manual auto answering (When Bluetooth is not connected)
Lighting/Voice Assistant
Charging mode
List of items
Power on/off
Pairing
Intercom pairing
Intercom connection conditions: One machine needs to be in
intercom receiving mode and one machine needs to be in intercom transmitting
mode before pairing can be performed. Intercom mode light: the green indicator
blinks quickly and enters the emission mode with a voice prompt. When the
green indicator blinks slowly, it enters the receiving mode, and a voice
prompt is displayed. At this time, the two pairs are connected. After the
connection is successful, the grid indicator blinks once at a 1S interval and
the intercom connection is successful. At this time, the intercom conversation
can be started. First connection: After the two machines are powered on, short
press the intercom key to enter the intercom mode. At this time, the two
machines are in the same mode of intercom receiving mode. At this time, long
press one of the intercom keys to make it enter the intercom transmitting mode
for intercom pairing.
Music Features
Notes
- Do not put the product into the open flame to avoid explosion;
- Do not disassemble the product. Avoid damage to product electronics;
- Do not approach the sharp object, the object will cause damage to the product;
- Do not use for a long time, please place in a dry place.
instruction warning NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no quarantee that interference wil not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception. whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna –
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 ofthe FcC Rules.
Operation is subject to the following two conditions.
- this device may not cause harmful interference. and
- this device must accept any interference received, including interference that may cause undesired operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>