Yixi Q08 Motorcycle Helmet Bluetooth Headset Instruction Manual

Yixi Q08 Motorcycle Helmet Bluetooth Headset

Product overview

Notes:
Please follow the Quick Manual instructions to connect the device to your phone and test the sound and volume before installing the headset. If there is a large difference in sound and volume after installation to the helmet, please adjust the speaker position in the helmet.

Power on/off

Double-click the button to switch the Chinese and English voice broadcast (Disconnect Bluetooth)

Intercom pairing

Bluetooth connection

Phone features

Charging mode

Music Features

voice assistant

Intercom reset

Introduction to Bluetooth intercom connection operation (After the intercom connection is successful, the Bluetooth music is turned off, the phone will automatically switch to the call mode when it comes, hang up the call and restore the intercom):

1. Two devices are intercom connected for the first time: press the intercom button of one of the devices to enter intercom mode, and accompanied by the prompt tone “intercom pairing”, there will be a prompt tone “intercom connection” after the device be paired succeed, when you hear a “dong” sound, start the intercom call, at this time the intercom indicator light keeps on after the device is turned on, in the case of Bluetooth disconnection.
2. When the Bluetooth has been connected to the mobile phone, you have to disconnect the Bluetooth before to connect the intercom after the device is turned on, short press the intercom button to enter the intercom mode, after the intercom connection is successful, use the mobile phone to search for Bluetooth connection. Intercom back connection:
   If the two devices connected before turned on, the two devices will be connected automatically, or one of the devices will be automatically back connected into the intercom mode, and the intercom indicator light will keep on after the connection.
   Answering call: the two devices are successfully connected to the intercom, the Bluetooth of the two devices is also connected to the mobile phone, when a phone comes in, the device will switch to the phone answering automatically, after hanging up, the intercom is restored.

Clear the intercom pairing, restore factory Settings:

• In the case of not connected Bluetooth and intercom, then, press the volume button 5S, when you hear “Dong” sound to release, it will start to restore factory Settings, clear all pairing information.
• Use the device to connect a third-party helmet Bluetooth headset for intercom calls:
• The two devices enter the intercom mode without Bluetooth connection to the mobile phone after turning on.After the Bluetooth headset is turned on and enter to Bluetooth mode, the two devices start the conection. You will hear the “Dong” sound after the connection succeed. Then you can start intercom call.

List of items

Notes

1. Do not put the product into the open flame to avoid explosion;
2. Do not disassemble the product. Avoid damage to product electronics;
3. Do not approach the sharp object, the object will cause damage to the product;
4. Do not use for a long time, please place in a dry place.

instruction warning

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 ofthe FcC Rules. Operation is subject to the following two conditions.

1. this device may not cause harmful interference. and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>