V-TAC Speaker User Manual
- June 7, 2024
- V TAC
Table of Contents
USER MANUAL
WEEE Number:80133970
SPEAKER (VT-6207-2)
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC products. V-TAC will serve you the best. Please read these instructions carefully & keep this user manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 1 year from the date of purchase. The warranty does not apply to damage caused by incorrect usage or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect usage of the product. This product is warranted for manufacturing defects only.
Multi-Language Manual QR CODE
Please scan the QR code to access the manual in multiple languages.
VT-6210-2 [PDF]
PANEL FUNCTION
1. USB/ TF /AUX
2. MIC INPUT
3. DC INPUT
4. POWER: ON/OFF
5. ADJUST THE VOLUME OF THE MICROPHONE
6. ECHO
7. ADJUST THE VOLUME OF THE WHOLE UNIT
8. BASS| 9. TREBLE
10. PREVIOUS SONG
11.PLY/PAUSE
12.NEXT SONG
13. INTERCHANGE
14.REC
15.LED
---|---
REC FUNCTION
HOW TO USE THE RECORDING FUNCTION:
STEP 1 : Make sure the unit is switched on, and there is a USB memory
stick or TF card inserted in the slot.
STEP 2: Plug and test the microphone upon plugging. The device is ready
to record once your voice is audible from the speaker.
STEP 3 : Press the button ‘REC’ on the remote control to start/stop
recording, you are free to rec what you want.
Press the button ‘REC/PLAY’ to play your recording.
REMOTE FUNCTION
- MUTE: Press this button to mute the unit.
- Press this button to toggle between the various inputs (AUX, USB, SD, FM, BLUETOOTH), Long press this button to turn on/off the voice prompt.
- Press the button to start recording.
- Press this button to increase the master volume for the unit.
- Press this button to pause or play the unit when it is on the mode of USB. When it is on the mode of FM, press this button to auto-scan all channels. Long press to change the language to Chinese/English for the voice prompt.
- Press this button to select the previous song/channels
- Press this button to reduce the master volume for the unit.
- Press this button to repeat one/repeat all.
- Press this button to play the recording.
- Press this button to select the next song/channel.
- Press this button to the EQ mode of Normal, Jazz, Rock, POP & Classical
- 0-9, Key number for selecting certain songs in the USB/SD/TF Card.
WIRELESS FUNCTION
STEP 1 : In the front panel, press the mode button to launch the
Bluetooth application. This will show the Bluetooth logo shows on the screen.
STEP 2 : Toggle the Bluetooth switch on to activate. The device will
automatically begin to scan for nearby Bluetooth devices.
STEP 3: Tap “V-TAC VT-6207-2” on your list of devices. Depending on the
device you are trying to connect the speaker to, it may be necessary to enter
a passcode. Enter the default passcode “0000” if prompted by the device. Then,
wait for your device to be connected successfully.
STEP 4 : Tap the entry for Bluetooth accessory when it is detected by the
smartphone or computer and displayed on the screen. Then it can use Bluetooth
to operate in conjunction with accessories.
CHARGING INDICATOR
Charging : The led light will be in red color
Full: When full-charged the led light will be in the green colon
Charging Time : 2 to 4 hours
Working Time: 5 to 6 hours
TECHNICAL SPECIFICATIONS)
- Frequency Range: 2.4-2.48Ghz
- Working Distance: up to 15 meters in open space.
- Supporting: USB/TF card play
- FM Radio: frequency 87.5-1080MHz
- Remote Control: up to 5 meters in open space.
- LED light with on/off Switch
- Output power:30w
- Distortion ≤ 1.0%
- Frequency response: 1801-1z-20Khz
- Microphone sensitivity: -40dB
- Working time: Music time 2 to 4 hours
- Input jack: Aux input, wired microphone input
- Charging input power: DC 9V INPUT (Power Adaptor – AC:100-240V)
- Charging time: 5 to 6 hours
INSTRUCTIONS
- This unit uses a rechargeable battery. When the battery power is depleted, please plug the device into an electric socket with the correct input voltage.
- When the unit is charging, please make sure to switch on the AC/DC option, then safely unplug when finished.
- On first use, the battery must be charged for 10 to 12 hours.
- The unit’s battery working time lasts up to 2 to 4 hours, depending on the usage.
ATTENTION
- To maintain battery life, please charge the battery every time the power is completely depleted. Damage may occur if the battery is not charged for longer periods, so please use and charge the battery at regular intervals.
- Our company reserves the right to update the product without any notice.
- If you have any issues with the product, kindly contact a professional technician. Do not open the unit yourself.
- For safety reasons, keep the device away from children.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>