Yixi Technology Roadcam App User Guide

Yixi Technology Roadcam App

Product Overview

Important Notice:
Before installing the headphones, follow the Quick Manual instructions to connect your phone and listen to the sound and volume. If there is a large difference in sound effect and volume after installing it on the helmet, please adjust the position of the speaker in the helmet.

Power on/off

Bluetooth connection

Charging function

Telephone function

Recorder/video

Photo/WIFI

Music function

Voice assistant

Introduction to TF Card
Support (insert the TF card, insert the USB cable, one end connects to the charging port of the machine, one end connects to the computer, the machine automatically enters the card reader Reader mode: the blue and green lights in the grid alternately slow flash); can be copied or deleted files on the computer Micro SD card (support ≤ 256G)

WIFI connection name/car recorder APP

WIFI connection name: YX-Q28-WIF|*(APP connects to LAN, after connecting and using successfully, the cel phone can not connect to other WIFI, and can not use cell phone traffic)
APP operation mode of the car recorder (working condition of the car recorder: the memory card must be inserted to work normally)

Download APP
Open your cell phone android or lOS in the cell phone application market or APP STORE directly search and download APP name: Roadcam after installing it

Second: Host connect APP Long
press the host car recorder switch on, double-click the photo button to open the WIFI, use the phone to open the WIFI function, search for WIFI name: YX-Q28-WIFI……, dick to connect successfully (the phone will be in the state of no network), open the downloaded Roadcam, click to connect to the recorder, connect to the completion of the main interface of the APP wil show that the recorder is connected! Successful, click to see the video recording

Third: View recorded video or photos
Repeat the operation of point 2 above, enter the video interface, pause the recording, and then click on the video button on the window to view the recorded video; photo view the same operation.

Recorded video time and size:
one file every 5 minutes by default (APP can choose video time and video file size)

Recording mode:
cyclic recording (i.e., after a memory card is recorded, it will automatically overwrite the previous video file, and so on)

Product List

APP Installation and Connection

1. Download APP
   Open the cell phone Android or IOS in the cell phone application market or APP STORE directly search and download APP name: Roadcam after Installation can be, use WeChat and scan QR codeto download; and install to allow information services and camera access

2. Cell phone connection to logger WIFI
   After the recorder is turned on, you need to manually turn on WIFI to connect (WiFi is only for this software)

3. Real-time video recording
   Just click on the Recorder button in the software interface View the real-time video

4. Setup parameters

5. Pause the live video recording

6. Click the “Setting” button at the upper right corner. Various parameters can be set.

7. View Recorded Video/Pictures

8. Pause the live video recording

9. Click the “Video” button. You can view it, The operation of viewingpictures is same as above

10. View downloadable videos/images
    Click on the “Select” button and check the video you want to download.

11. Click the “select” button and check the videos you want to download.

12. Click the “Download” button

13. Click the “Album” button to view the Downloaded videos

Description of the video recording function

Recorded video time and size: default one file every 5 minutes (APP selectable video recording time and video file size)

Recording mode:
cyclic recording (i.e., after a memory card is finished recording, it will automatically overwrite the the previous video file, and so on)

Video recording function use:
long press the car recorder switch button on, the blue light is long bright, the In standby mode, short press this key again, start recording, blue light slow flash

Low power shutdown:
In the process of using, due to the high power consumption of the car recorder, it will shut down prematurely after a short period of time.short time will be shut down early, at this time the bluetooth function can continue to use, is a normal phenomenon. This is a normal phenomenon

Light Status

Product Parameters

Frequently Asked Questions

Q28 Frequently Asked Questions

1. boot connected to the bluetooth, play music without sound, please confirm that the mark line in the correct interface or mark line interface has been completely accessed in the corresponding interface
2. In the normal use of the process, due to the car recorder power consumption is higher than the Bluetooth, the car recorder will first shut down, Bluetooth normal work, is a normal phenomenon
3. The cell phone connects to the WIFl of the car recorder, and the cel phone has no signal, which is a normal phenomenon.
4. Car recorder connection APP is not successful, confirm that the cell phone WIFI connection is the machine’s WIFl name; or cell phone exit APP, the machine switch to reconnect
5. Charging indicator red light does not light, confirm that the charging cable in the correct interface
6. When the machine is plugged into the charging cable, the Bluetooth function will be automatically shut down, and the car recorder will be turned on, which is a normal phenomenon. Recommended in the charging process, turn off the car recorder, do not use the machine.
7. Car recorder memory card, due to high-definition video read and write into, such as the need to buy, it is recommended to buy a brand of high-speed memory card (Class10)

PDF created with pdfFactory Pro trial version www.pdffactory.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>