Yixi Q082X Motorcycle Helmet Bluetooth Headset Instruction Manual
- June 12, 2024
- Yixi
Table of Contents
Q082X QUICK INSTRUCTION MANUAL
PRODUCT OVERVIEW
Important Notice:
Before installing the headphones, follow the Quick Manual instructions to
connect your phone and listen to the sound and volume. If there is a large
difference in sound effect and volume after installing it on the helmet,
please adjust the position of the speaker in the helmet.
Power On/Off
Intercom Pairing
After the two machines boot, before not connecting Bluetooth, any one of the short press the intercom key, enter the intercom mode, intercom matching can be done; after matching successfully, the intercom key green light, when you hear the “Knock” sound, get on the intercom
Bluetooth Connection
Phone Features
Charging Mode
Music Features
Voise Assistant
Intercom Reset
Press for 5 seconds at the same time
Bluetooth intercom connection Operation Brief Introduction (after successful intercom connection, Bluetooth music sound is turned off, phone will automatically switch to call mode, turn off recovery intercom) :
- Two machines connected to the intercom for the first time: after the machine started, without connecting Bluetooth, one of the machines pressed the intercom key to enter the intercom mode, accompanied by the sound of“Intercom match”, to start intercom match, after the successful pairing will be prompted to prompt the successful pairing “Intercom connection”, when you hear a“Dong” after the intercom call, this time the intercom indicator lights up
- After the boot, when Bluetooth has been connected to the phone, this time to connect to talk, first disconnect Bluetooth connection, can short press the radio key to enter the radio mode, after the successful radio connection, use the phone to search for Bluetooth connection.
Intercom Link, two connected machines, after the boot, two machines automatic
intercom link, or make one of the machines into intercom mode will also
automatically link back, after the intercom indicator light long. Phone
answering: the two machines intercom connected successfully, Bluetooth is also
connected to the mobile phone, when a call comes in, automatically switch to
the phone to answer, hang up, intercom recovery.
Clear the pair of intercom, resume factory settings, boot in the absence of
Bluetooth and intercom, at the same time according to the volume of the Button
5s, when you hear the “Knock” sound let go, that is, resume factory settings,
clears all pairing information. use the machine to connect with a third-party
headset bluetooth headset to make intercom calls. After the machine is turned
on, neither machine is connected to the mobile phone Bluetooth. After the
intercom machine is turned on, it enters intercom mode. When the Bluetooth
headset is turned on, it enters Bluetooth mode, two start to connect, connect
successfully, there will be a prompt intercom connection, hear the”Dong”
sound, that is, the beginning of intercom
List of Items
Notes
- Do not put the product into the open flame to avoid explosion;
- Do not disassemble the product. Avoid damage to product electronics;
- Do not approach the sharp object, the object will cause damage to the product;
- Do not use for a long time, please place in a dry place.
Instruction Warning
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmfulinterference to radio communications. However, there is no quarantee that interference wil not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception. whichcan be detemined by tuming the equipment offand on, the user is encouraged totry to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and rereiver.
- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment. This device complies with Part 15 of the FcC Rules. Operation is subject to the following two conditions.
- this device may not cause harmful interference. and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>