Yixi D2-6X Motorcycle Intercom Helmet Bluetooth Headset User Manual

Yixi D2-6X Motorcycle Intercom Helmet Bluetooth Headset

Product Overview

1-channel-5 intercom pairing mode of operation

When making a 1-cut-5 intercom connection, it is recommended that you use your cell phone to connect to Bluetooth before making the intercom connection.

No. 3,4,5 according to the above operation is completed, all the machines are turned on, into the 1 channel 5 connection intercom mode. Take No.1 machine as the main switching intercom (only two people can talk to each other at the same time)

Introduction to Bluetooth intercom connection operation (intercom and music sharing are turned off by default every time you turn on the power)

• 1 channel 5 connection intercom (intercom button (A) / B / C / D / E button function)
• After the machine is turned on, short press the microphone button to enter the intercom mode, the following has been a machine connection as an example (hereinafter referred to as No. 1.2.3.4.5.6), the connection operation is as follows (No. 1 machine is the host connection).
• Power on the first to open the No. 1 machine, short press the microphone button, so that the No. 1 machine into the intercom mode, intercom button (A) indicator green light flashes slowly, into the intercom receiving state, open the No. 2 machine, short press the microphone button to enter the intercom mode, intercom button (A) indicator green light flashes slowly, into the intercom receiving state, long press the No. 1 intercom key (A) to enter the intercom pairing state, the No. 2 machine to keep motionless, after the connection is successful, the green light When the connection is successful, the green indicator light is on, the connection is successful, at this time, long press the on/off button to turn off the No.2 machine, the No.2 machine will be stored in the No. 1 machine under the A button. No. 1 host is not turned off, keep in intercom mode state, turn on No.3 machine and turn on the machine, short press the microphone key to make it enter into intercom receiving mode, at this time, long press No. 1 machine B key, enter into intercom pairing state, after connecting successfully, the green indicator light will be on long time, the connection is successful, turn off the No.3 machine, the No.3 machine will be stored in the No.1 machine under the B key.
• No. 1 host does not turn off the power, keep in the intercom mode state, turn on No. 4 machine, short press the microphone key to make it enter the intercom receiving mode, at this time, long press the No. 1 machine C key, enter the intercom pairing state, after connecting successfully, the green indicator light is on, the connection is successful, turn off the No. 4, the No. 4 machine will be stored in the No. 1 machine under the C key.
• No. 1 host does not turn off the power, keep in the intercom mode state, open the No. 5 machine on, short press the microphone key to make it enter the intercom receiving mode, at this time, long press the No. 1 machine D key, enter the intercom pairing state, after connecting successfully, the green indicator light is on, the connection is successful, turn off the No. 5, No. 5 is stored in the No. 1 machine under the D key.
• No. 1 host does not turn off the machine, keep in the intercom mode state, open the No. 6 machine boot, short press the microphone key to make it enter the intercom receiving mode, at this time, long press the No. 1 machine E key, enter the intercom pairing state, connect successfully, the green indicator light is on, the connection is successful, turn off the No. 6 machine, the No. 6 machine will be stored in the No. 1 machine under the E key. According to the above operation is completed, all the machines are turned on, enter the intercom mode, with the No. 1 machine as the main switching intercom (each time only two people at the same time intercom calls)
• When machine 1 wants to talk to machine 2, press A key of machine 1 to connect back to machine 2; when machine 1 wants to talk to machine 3, press B key of machine 1 to connect back to machine 3;
• If No. 1 wants to talk to No.4, press No. 1’s C key briefly to return to No.4; if No. 1 wants to talk to No.5, press No. 1’s D key briefly to return to No.5;
• If machine 1 wants to talk to machine 6 at this time, press the E key of machine 1 to connect back to machine 6; if several other machines switch the call, repeat the operation of machine 1 to realize this function!

Intercom button (A)/B/C/D/E

After power on, short press the microphone button to enter intercom mode

• A Button : long press A key to search for pairing (green light blinking), short press A key to connect (green light blinking slowly), double click A key to clear pairing record.
• B Button: long press B key to search pairing (green light blinking), short press B key to connect (green light blinking slowly), double click B key to clear pairing record.
• C Button: Long press C key to search pairing (green light blinking), short press C key to connect (green light blinking slowly), double click C key to clear pairing record.
• D Button: Long press D key to search for pairing (green light blinking), short press D key to connect back (green light blinking slowly), double-click D key to clear pairing record.
• E Button: Long press E key to search for pairing (green light blinking), short press E key to connect back (green light blinking slowly), double press E key to clear pairing record.

Connecting to third parties

Short press the microphone key to enter intercom mode, the Long press any one of the intercom keys ABCDE to enter intercom pairing mode.

Reset intercom

1. Intercom back to connect
   After the connected machines are turned on, press the microphone key to enter the intercom mode, and press the corresponding pairing key on the host to connect back to other corresponding machines.

2. Telephone Priority
   After powering on the machine, the machine is connected to the Bluetooth, no matter which mode the machine is in, when the machine calls or goes to the phone, it will be prioritized to enter the phone mode automatically, and after hanging up, it will restore the corresponding mode.

3. Clear intercom pairing, restore factory settings
   Power on without connecting Bluetooth and intercom and music sharing, at the same time long press the volume down and volume up buttons for 5S to clear the Bluetooth pairing record, at the same time long press 10S to clear all the intercom pairing record, in the operation of clearing the intercom pairing record, you need to clear all the machines to intercom pairing, otherwise it will affect the intercom connection.

4. Intercom connecting third party operation
   After power on, short press the microphone key to enter intercom mode, long press any one of the intercom keys ABCDE to enter intercom pairing mode, turn on the third party bluetooth device, enter bluetooth pairing mode, after pairing successfully, the indicator light will be on long time to intercom.

5. Music sharing (unlimited number of people within the effective distance)
   After the two devices are turned on, both long press the microphone key to switch to music sharing mode, one cell phone connects to the device to play music by Bluetooth, accompanied by a tone “music sharing transmit mode” or “music sharing receive mode” “, start music sharing pairing: one device is in music sharing transmit mode, the other is in music sharing transmit mode, the other is in music sharing receive mode, the indicator light will be on, and the pairing will take place.
   After successful pairing, there will be a successful connection tone at the music sharing receiving mode end, accompanied by “music sharing connection successful” tone, music sharing is successful, please note that there will be no successful connection tone at the music sharing transmitting end; if both devices are connected to Bluetooth to play music, the only way is to enter the “music sharing receiving mode”. If both devices are connected to Bluetooth to play music, only the music sharing transmitter can share.
   Six: When all six machines are connected successfully, such as the No. 1 machine is talking to the No. 2 machine, at this time the No. 5 machine to switch to speak with the No. 2 machine pair, because the No. 2 machine in the intercom, at this time the No. 5 machine’s ABCDE button at the light will flash 3, prompting the other party is talking to the occupied line, and accompanied by a beep prompt.

• **Power on/off

**

• **Bluetooth connection

**

• **Music features

**

• **Music Sharing

**

• **Charging function

**

• Mixina function
  
  When the intercom is successfully connected, the volume up and down operation is as follows: (1) Short press volume up and down to adjust the volume size of Bluetooth music * Long press volume up and down to adjust the volume size of the intercom Adjust the volume of the intercom 3 Double-click the volume up and down to switch the next and orevious songs of the Bluetooth music. Mixing function: intercom and bluetooth can work independently without affecting each other, when the intercom and Mixing function: intercom and bluetooth can work indecendenty without attecung each other. when the intercom and blue com are connecied successtully, the mo souncs can be moed outto te speaker, vou can near the sound or both.

• Telephone function
  Double click to switch manual/ automatic answer
  (When Bluetooth is not connected)

• **Voice assistant

**

• **Music Sharing Pairing

**

• **Product List

**

Caveat

1. 1. Please do not put the product into the open fire to avoid explosion;
   2. Please do not disassemble the product to avoid damage to the product’s electronic devices;
   3. Please do not close to sharp objects to cause damage to the product;
   4. long time not used, please place in a dry place;
   5. Before using the Bluetooth device, please fully charge it;
   6. If the red light does not come on when charging, it may be the voltage is too low;
   7. To extend the life of the built-in polymer battery, please charge the device at least once a month.

Instruction warning

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be detemined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>