Yixi X2-PRO Helmet Bluetooth Headset User Manual

Yixi X2-PRO Helmet Bluetooth Headset

Specifications:

• Model: XYZ-2000
• Dimensions: 10in x 5in x 3in
• Weight: 2 lbs
• Power: 120V AC
• Material: Stainless Steel

Product Information

The XYZ-2000 is a versatile kitchen appliance designed to make cooking easier and more efficient. With its durable stainless steel construction and compact design, it is perfect for everyday use in any kitchen.

Product Usage Instructions

Initial Setup:
Before using the XYZ-2000 for the first time, make sure to wash all removable parts with mild soap and water. Wipe the main unit with a damp cloth and dry thoroughly.

Operating the XYZ-2000:
Plug the XYZ-2000 into a power outlet using the provided power cord. Turn the unit on by pressing the power button located on the control panel. Select your desired settings using the intuitive interface.

Cooking Functions:
The XYZ-2000 offers a variety of cooking functions such as baking, grilling, and toasting. Follow the specific instructions in the user manual for each function to achieve optimal results.

Cleaning and Maintenance:
After each use, allow the XYZ-2000 to cool down before cleaning. Wipe the exterior with a damp cloth and clean the interior with warm soapy water. Make sure the unit is completely dry before storing.

Frequently Asked Questions (FAQ):

1. Q: Can I use the XYZ-2000 to bake cakes?
   A: Yes, the XYZ-2000 has a baking function that allows you to bake cakes, cookies, and more. Follow the recommended temperature and time settings in the user manual for best results.

2. Q: Is the XYZ-2000 dishwasher safe?
   A: No, only the removable parts of the XYZ-2000 are dishwasher safe. The main unit should be cleaned following the instructions provided in the user manual.

Product Overview

Important Reminder:
Before installing the headset, please connect your mobile phone according to the quick manual guide to test the sound effect and volume.
If there is a big difference in sound effect and volume after installing into the helmet, please adjust the position of the speaker inside the helmet.

Power on/off

Blue tooth connection

Telephone function

Mic button function

Half-Duplex intercom function

Connection conditions: Requires the same model to be paired, unlimited number of people within the effective distance.

Half-duplex intercom connection operation: all devices short press the microphone button to enter the half-duplex intercom call receiving mode, at this time one of them press and hold the microphone button does not release the button to speak (release to enter the half-duplex intercom call receiving mode), and the other several units to keep in the half-duplex intercom call receiving mode, devices in half-duplex intercom call reciving mode can pick up the voice. Other devices can make half-duplex intercom calls according to this operation.

Half-duplex speech: only one device can be allowed to enter the speech state, and all other device cannot be in the speech state.

6 people connect and 2 people intercom mode

When making a group intercom connection, it is recommended that you use your mobile phone to connect to the blue tooth before making the intercom connection.

When device 3,4,5 is connected according to the preceding operations, now switch on all devices again, into the group intercom mode, with the device 1 as the main one to switch intercom (Only support two people to intercom at the same time)

Introduction to wireless intercom connection operation (intercom and music sharing are turned off by default every time you turn on)

1: 6 riders intercom (usage of intercom A/B/C/D/E buttons)

The following is an example of the connection process with device 1 as the host(The following instructions refer to device 1.2.3.4.5.6 as No.1.2.3.4.5.6 for short):
First, turn on device No. 1, press the intercom button make sure the device No. 1 enter the intercom mode, the green light of the intercom key (A) blinks slowly, enter the intercom receiving status, turn on device No. 2, press the intercom key to enter the intercom mode, the green light of the intercom key (A) blinks slowly, enter the intercom receiving status, press and hold the intercom key No. 1 (A) to enter the intercom pairing status, device No. 2 remains stationary. The green indicator light keeps on, after successful connection. At this time, press and hold the button to turn off the device No. 2, the device will be stored under the Key A of the device No. 1.
The host device No. 1 does not shut down, keeps in the intercom mode, turn on No. 3, press the intercom button and enter to the intercom receiving mode, then press and hold the Key B of No. 1, enter to the intercom pairing status, the green light will be bright,, after successful connection, shut down No. 3, and No. 3 will be stored under the key B of No. 1.
The host device No. 1 does not shut down, keeps in the intercom mode, turn on No. 4, press the intercom button and enter to the intercom receiving mode, then press and hold the Key C of No. 1, enter to the intercom pairing status, the green light will be bright,, after successful connection, shut down No. 4, and No. 4 will be stored under the key C of No. 1.
The host device No. 1 does not shut down, keeps in the intercom mode, turn on No. 5, press the intercom button and enter to the intercom receiving mode, then press and hold the Key D of No. 1, enter to the intercom pairing status, the green light will be bright,, after successful connection, shut down No. 5, and No. 5 will be stored under the key D of No. 1.
The host device No. 1 does not shut down, keeps in the intercom mode, turn on No. 6, press the intercom button and enter to the intercom receiving mode, then press and hold the Key E of No. 1, enter to the intercom pairing status, the green light will be bright,, after successful connection, shut down No. 6, and No. 6 will be stored under the key E of No. 1.
After the operations are completed, all the devices are turned on, enter to the intercom mode, and switch the intercom with the device No. 1 as the host (only two people can talk to each other at the same time).

• When No. 1 wants to talk to No. 2, press the Key A of the No. 1 to connect No. 2.
• When No. 1 wants to talk to No. 3, press the Key B of the No. 1 to connect No. 3.
• When No. 1 wants to talk to No. 4, press the Key C of the No. 1 to connect No. 4.
• When No. 1 wants to talk to No. 5, press the Key D of the No. 1 to connect No. 5.
• When No. 1 wants to talk to No. 6, press the Key E of the No. 1 to connect No. 6.

Intercom button A/B/C/D/E button functions

After switching on, short press the microphone button to enter intercom mode

• Button A: Press and hold the Button A to search for pairing, short press Button A to connect back, and double click to clear the pairing record of Button A.
• Button B: Press and hold the Button B to search for pairing, short press Button B to connect back, and double click to clear the pairing record of Button B.
• Button C: Press and hold the Button C to search for pairing, short press Button C to connect back, and double click to clear the pairing record of Button C.
• Button D: Press and hold the Button D to search for pairing, short press Button D to connect back, and double click to clear the pairing record of Button D.
• Button E: Press and hold the Button E to search for pairing, short press Button E to connect back, and double click to clear the pairing record of Button E.

Connect the third-party device
Short press the microphone button to enter intercom mode, press and hold any one of the intercom ABCDE button to enter intercom pairing mode

Voice assistant

Intercom reset

Press 5S simultaneously Clear wireless pairing record

At the same time, press and hold 10S to clear all the intercom pairing records, in the operation of clearing the intercom pairing records, you need to clear all the devices for intercom pairing or it will affect the intercom connection.

Intercom back
After the two connected devices are turned on, press the intercom key to enter the intercom mode, and the two devices will automatically connect back to each other.

Phone answer: the two devices are successfuly connected to the intercom, blue tooth is also connected to the mobile phone, when a phone comes in, the automatic switch to the phone answer, after hanging up, the intercom is restored.

Telephone priority
After switching on the device, the device is connected to the blue tooth, no matter which mode the device is in, when the device calls or goes to the phone, it will give priority to
automatically enter the phone mode, and resume the corresponding mode after hanging up.

Clear intercom pairing and restore factory settings
When the blue tooth and intercom are not connected, press the volume up and down buttons for 5S at the same time to clear the blue tooth pairing record.press the volume up and down buttons for 10S at the same time to clear al the intercom pairing record. You need to clear all the intercom pairing record, otherwise, it will affect the intercom connection.

Connect a third-party helmet wireless headset for intercom calls
After turning on, press the intercom button to enter the intercom mode, and press any key of the A/B/C/D/E to enter the intercom pairing mode, turn on the third-party wireless
device and enter the blue tooth pairing mode. After the pairing is successful, the indicator will keep on and start the intercom.

Music sharing (unlimited number of people within effective distance)
After the device is turned on, press the button to switch into the music sharing mode. A mobile phone is connected to the blue tooth of the device to play music, and accompanied by the prompt tone “Music sharing transmitting mode” or “music sharing receiving mode” to start the music sharing pairing: One device must be in the music sharing transmitting mode, and other devices are in the music sharing receiving mode. After the pairing is successful, the music sharing receiving mode end will have a successful connection prompt tone accompanied by the “Music sharing connection success” prompt tone, indicating that the music sharing is successful. Please note that the music sharing transmitting end will not have a successful connection prompt tone. If both devices are connected to blue tooth to play music, it can only be shared by entering the music sharing transmitter. VI: When all six devices are connected successfully, such as the No. 1 is talking to the No. 2 , If No. 5 wants to talk to No. 2 at this time, it will find that the indicator flashes three times, indicating that No. 2 is on the call.

Music function

Music Sharing

Charging function

Sound mixing function

When both the intercom and wireless are successfully paired, the operation of volume buttons is as follows:

1. short press volume up and down buttons to adjust the volume size of the wireless music
2. long press volume up and down buttons to adjust the volume size of the intercom
3. double-click the volume up and down buttons to switch the wireless music of the next song and the previous song

Mixing function: intercom and wireless can work independently, do not affect each other. When the intercom and blue tooth are connected successfully, you can listen to music and intercom at the sam time.

Half-Duplex intercom connection

Product List

Caveat

1. To avoid explosion, please do not put the product into the flame;
2. Please do not disassemble the product to avoid damage to the electronic components of the product;
3. Please keep away from sharp objects to avoid damage to the product.;
4. Please keep in a dry place if not used for long time;
5. Before using the wireless device, please fully charge it;
6. If the red light does not come on while charging, it may be the voltage is too low;
7. To extend the life of the built-in lithium polymer battery, please charge the device at least once a month.

Instruction warning

NOTE: This product has been tested, meet the restrictions of Class B digital device, pursuant to part 15 of the FCC Rules.
These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be detemined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. This device complies with Part15 of the FCC Rules.
The operation needs to fulfil the following two conditions.

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2A9MI-X2-pro

FCC Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarant ee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environm ent. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>