Yixi V80 2X Motorcycle Helmet Intercom Bluetooth Headset User Manual
- June 12, 2024
- Yixi
Table of Contents
Yixi V80 2X Motorcycle Helmet Intercom Bluetooth Headse
Feature
|
| 
|
|
---|---|---|---|---
Full Helmet
| Cross-Country Helmet| Visor| Half Helmet|
summer Helmet
Product Overview
Important Notice:
Before installing the headphones, follow the Quick Manual instructions to
connect your phone and listen to the sound and volume. If there is a large
difference in sound effect and volume after installing it on the helmet,
please adjust the position of the speaker in the helmet.
Power on/off/voice switching
Intercom Pairing
After two machines are turned on and not connected to Bluetooth, either
machine can briefly press the intercom button to enter intercom mode and pair.
After successful pairing, the green light of the intercom button will remain
on. When a “dong” sound is heard, a intercom call will be made.
Bluetooth connectivity
Light on and off
Music Features
Charge mode
Telephone Function
Intercom reset
Introduction to Bluetooth intercom connection operation:
Two machines are connected for the first time for intercom: After the machine
is turned on, without connecting to Bluetooth, briefly press the intercom
button of one day’s machine to enter intercom mode, accompanied by a prompt
sound of “intercom pairing” to start pairing.
After successful pairing, there will be a prompt of “intercom connection.
After hearing the “dong” sound, the intercom call will start, and the intercom
indicator light will remain on.
Intercom and back connect: After two connected machines are turned on both
machines will automatically communicate and backconnect2 or if one of the
machines enters the intercom mode, the intercom indicator light will remain on
for a long time.
Telephone answering: The two machines have successfully connected to each
other through 1ntercomi and Bluetooth is also connected to the phone. When a
call comes in, 1t automatically switches to answering the phone. After hanging
up, the intercom resumes.
Clear intercom pairing and restore factory settings: Turn on the phone without
connecting Bluetooth and intercom, and press the volume μp/down (1 button for
55. When you hear a “thud” sound to release, restore factory settings and
clear all pairing1nformat1on.
Using a machine to connect a third-party helmet Bluetooth earphone for intercom calls: After turning on, neither machine is connected to the phone Bluetooth. The intercom machine enters intercom mode when turned on, and the Bluetooth earphones enter Bluetooth mode when turned on. The two begin to connect. After successful connection, there will be a prompt for intercom connection. After hearing a “dong” sound, the intercom will begin
Package Content
Notes
- Do not put the product into the open flame to avoid explosion;
- Do not disassemble the product. Avoid damage to product electronics;
- Do not approach the sharp object, the object will cause damage to the product;
- Do not use for a long time, please place in a dry place.
Instruction warning
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to parts of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception. which can be determined by timing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FcC Rules. Operation is subject to the
following two conditions.
(1) this device may not cause harmful interference. and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>