LANZAR VCT2410 4000 Watt 2 Channel High Power MOSFET Amplifier Car Audio Amp Owner’s Manual

LANZAR VCT2410 4000 Watt 2 Channel High Power MOSFET Amplifier Car Audio

Amp

Product Information

Specifications

• Model: [Product Model]
• Dimensions: [Product Dimensions]
• Weight: [Product Weight]
• Power Source: [Power Source]
• Material: [Product Material]
• Color: [Product Color]
• Warranty: [Product Warranty]

Description
The [Product Name] is a versatile and user-friendly product designed to [product purpose or functionality]. It is made of [product material] and comes in a stylish [product color]. With its compact dimensions and lightweight design, it is easy to carry and use in various settings.

Key Features

• [Feature 1]: [Description of Feature 1]
• [Feature 2]: [Description of Feature 2]
• [Feature 3]: [Description of Feature 3]

Included in the Package

• [Product Name]
• [Accessory 1]
• [Accessory 2]
• [Accessory 3]

Product Usage Instructions

1. Step 1: Unboxing
   Start by opening the product packaging carefully. Remove all the contents and ensure that everything listed in the “Included in the Package” section is present.

2. Step 2: Powering On
   Connect the device to a power source using the provided cable. Once connected, press and hold the power button until you see the indicator lights turn on. This indicates that the device is powered on and ready for use.

3. Step 3: Setting Up
   Follow the on-screen prompts or refer to the user manual for initial setup instructions. This may include selecting language preferences, connecting to a network, and setting up user profiles.

4. Step 4: Basic Operations
   To perform basic operations, use the buttons or controls located on the device. The user manual provides detailed instructions on each operation. Familiarize yourself with the functions and features of the device to make the most out of it.

5. Step 5: Maintenance and Cleaning
   To ensure optimal performance and longevity of the device, regular maintenance and cleaning are essential. Refer to the user manual for specific guidelines on how to clean and maintain your device properly.

Troubleshooting
If you encounter any issues or problems with the device, consult the troubleshooting section of the user manual. It provides solutions to common problems and guides you through resolving them.

Frequently Asked Questions (FAQ)

• Q: How do I charge the device?
  A: To charge the device, connect it to a power source using the provided cable and adapter. Make sure to follow the recommended charging time mentioned in the user manual.

• Q: Can I use the device while it is charging?
  A: Yes, you can use the device while it is charging. However, please note that the charging time may be longer if the device is in use simultaneously.

• Q: How do I update the firmware of the device?
  A: Firmware updates can be done by connecting the device to a computer and following the instructions provided in the user manual or on the manufacturer’s website.

• Q: Is the device waterproof?
  A: No, the device is not waterproof. Avoid exposing it to water or other liquids to prevent damage.

Congratulations
Congratulations on your purchase of a Lanzar VECTOR series amplifier. You have purchased a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CD’s and recordings.

features and specifications

2 ch amp VCT-2110 • VCT-2210

• crossover mode selector
  When used with normal, full range system, set this switch to “FULL”. If you wish to use the internal crossover to power a driver or specific frequency range, use the “LPF”or “HPF” FOR the “LOWPASS” OR HIGHPASS” settings.

• input level controls
  Enables the matching of input levels to the output levels from head unit (or other signal source). The input sensitivity of adjustment ranges from 6V to 200mV.

• crossover frequency control
  When crossover mode selector is in HIGHPASS mode, this control sets the lower frequency limit for audio program sent to the speakers. When crossover mode selector is in LOWPASS mode, this control sets the upper frequency limit for audio program sent to the speakers. The crossover is continuously variable adjustment from 40 tO 250 Hz.

• bass boost selector
  This selector switch permits the bass level an increase of 18dB. (VCT-2110/2210)

• low level input
  This amp features RCA type jacks for high impedance input. Use these with car stereo output which uses RCA type connector cables.

• high level input
  If your car stereo jacks are not RCA type output, use the high-low level input adaptor to connect the speaker output leads of carstereo and the RCA input jacks of amp.

• AUX line outputs
  This amp features RCA jacks for AUX line outputs. Use these for unlimited system expansion to the next VECTOR.

• power LED
  This indicator is illuminated in GREEN when power is applied. protection LED This indicator is illuminated in RED when the built-in protection circuitry is actirated. power fuse The fuse protects the amplifier and your car’s electrical system from short circuit conditions.

• power terminals
  Use these connectors to deliver power, ground, and remote turn-on control to the amplifier.

• speaker connectors
  These terminals are to guarantee high conductivity and minimum signal loss .

• frequency response – 15 Hz-30 KHz

• input impedance

• low level inputs  10K Ohms

• input sensitivity

• low level inputs  200mV~6V Adjustable

• S/N ration >95dB

• channel separation – >65dB

• crossover filters

• low Pass – 40 Hz-250 Hz –

• high Pass  40 Hz-250 Hz

• bass boost  – 0/+18dB

• matching speaker impedance

• stereo mode 2-4 Ohms

• bridged mode 4-8 Ohms

• maximum current draw  30A 40A

• power supply voltage 14.4V DC Neg. Ground (10.5-16V)

• dimensions (W x H x L.)

• mm 270 x 44.5 x 228  270 x 44.5x 305

• inches 10.63 x 1.75 x 9  10.63 x 1.75 x 12

2 ch amp VCT-2310 • VCT-2410 • VCT-2510

• crossover mode selector
  When used with normal, full range system, set this switch to “FULL”. If you wish to use the internal crossover to power a driver or specific frequency range, use the “LPF”or “HPF” FOR the “LOWPASS” OR HIGHPASS” settings.

• input level controls
  Enables the matching of input levels to the output levels from head unit (or other signal source). The input sensitivity of adjustment ranges from 6V to 200mV.

• crossover frequency control
  When crossover mode selector is in HIGHPASS mode, this control sets the lower frequency limit for audio program sent to the speakers. When crossover mode selector is in LOWPASS mode, this control sets the upper frequency limit for audio program sent to the speakers. The crossover is continuously variable adjustment from 40 tO 250 Hz.

• bass boost level control
  This control permits adjustment of the bass level up to an increase of approximately up to 18dB. (VCT-2310/2410/2510)

• sub sonic control
  When the sub sonic selector switch is in “ON” mode, this filter control permits continuously variable adjustment from 10 to 100Hz. (VCT-2310/2410/2510)

• low level input
  This amp features RCA type jacks for high impedance input. Use these with car stereo output which uses RCA type connector cables.

• high level input
  If your car stereo jacks are not RCA type output, use the high-low level input adaptor to connect the speaker output leads of car stereo and the RCA input jacks of amp.

• AUX line outputs
  This amp features RCA jacks for AUX line outputs.
  Use these for unlimited system expansion to the next VECTOR.

• power LED   This indicator is illuminated in GREEN when power is applied.

• protection LED This indicator is illuminated in RED when the built-in protection circuitry is actirated.

• power fuse
  The fuse protects the amplifier and your car’s electrical system from short circuit conditions.

• power terminals
  Use these connectors to deliver power, ground, and remote turn-on control to the amplifier.

• speaker connectors
  These terminals are to guarantee high conductivity and minimum signal loss.

electrical connections

2 ch amp • VCT-2110 • VCT-2210 VCT-2310 • VCT-2410 VCT-2510

using low-level inputs

2 ch amp • VCT-2310 • VCT-2410• VCT-2510

2 ch amp • VCT-2110 • VCT-2210 VCT-2310 • VCT-2410 VCT-2510

mounting and installation

mounting

Your new Lanzar Vector Series amplifier comes complete with all required mounting hardware. When determining a suitable location in your vehicle for the amp, please remember that it is a high-power electronic device capable of generating high heat. For this reason, always choose a location in your vehicle which has low vibration, adequate ventilation, a minimum of dust, and no moisture. Be sure to mount the amp in such a manner as to allow reasonable airflow over the cooling fins.
Mark the location for the mounting screw holes by positioning the amp where you wish to install it and use a scribe (or one of the mounting screws) inserted in each of the mounting holes to mark the mounting surface. If the mounting surface is carpeted, measure the hole centers and mark with a felt tip pen.
Before attempting to drill the mounting holes, take note of any wires, lines or other devices in your vehicle which may be located behind the mounting surface! Then drill pilot holes in the mounting surface for the mounting screws and insert them. Tighten the screws securely.

Wiring tips

When making electrical connections to your amplifier, please observe the following:

• Use at least 8 gauge wire for power and ground connections.
• Wire the amplifier directly to the car battery.
• For the ground connection, use the shortest possible wire to a good chassis ground point.
• Wire the Remote connection to the auto start lead of your head unit, equalizer or power antenna.

Fuses

About power fuses: Lanzar Vector Series amplifiers feature built-in fuse systems. These fuses protect both the amplifier and the electrical system in your vehicle from fault conditions. If you ever need to replace the fuse in your Lanzar Vector Series amp, use a fuse of exactly the same type and rating. A different type or rating of fuse may result in damage or fire.

troubleshooting

perfection circuitry
The built-in protection circuitry in the Lanzar Vector Series amplifiers will disable the amplifier if it senses an input overload, a speaker short circuit, or extreme temperature conditions. When the protection circuit is activated by any of these conditions, the Protection LED will be illuminated. If this occurs, carefully inspect the system to determine the source of the problem.

• If the shutdown was a result of a thermal overload condition, allow the amplifier to cool down before attempting to restart it.
• If the shutdown was a result of an input overload, or speaker short circuit, be sure to correct the condition before restarting.

The amplifier can be restarted by turning the remote power OFF and then ON again.

No output.
Confirm that all terminal strip connections are secure and tight. Check both in-line and built-in fuses. Both the +12V and the Remote terminals must have +12v referenced to chassis ground. Confirm that the audio signal source (car radio, equalizer, etc.) is connected and is supplying output signal. To check if the amp is supplying signal, unplug the cables from the signal source (but leave them plugged into the amp). Briefly tap the center pin of each of the disconnected RCA plugs with your finger. This should produce a noise (feedback) in your speakers.

Only one channel works.
Confirm that all terminal strip connections are secure and tight.

Check the Balance control on the head unit (or other source) to verify that it is set to its midpoint. If you are using the Low Level RCA input, reverse the input plugs at the amplifier (i.e., switch the L with the R). If the channels which is silent switches to the other side, the problem is either in the head unit/other source or the connecting cables.

Weak output.
Readjust the Input Level Control(s) to better suit the input signal.

Noise in the audio.
If the noise is a “whine” whose pitch follows the engine speed, confirm that the amplifier and any other signal sources (head unit, etc.) are properly grounded. where is equipelic i sor pang nose hose ra. or lovs egin is ine this sully means that the Check the rounting of the speaker and input wires to make sure they are not adjacent to wires which interconnect lights and other accessories. If the above steps fail to improve or clear noise interference, the system should be checked by a professional mobile audio installer.

precautions

• Do not operate the amplifier when it is unmounted. Attach all audio system components securely within the automobile to prevent damage, especially in an accident.
• Do not mount this amplifier so that the wire connections are unprotected, or in a pinched condition, or likely to be damaged by nearby objects.
• Before making or breaking power connections in your system, disconnect the vehicle battery. Confirm that your head unit or other equipment is turned off while connecting the input jacks and speaker terminals.
• If you need to replace the power fuse, do so only with a fuse identical to that supplied with the amplifier. Using a fuse of a different type or rating may result in damage that isn’t covered in the manufacturers warranty.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>