Lanzar OPTIMC80 Motorcycle Speaker Amplifier System

Congratulations on your purchase of this Pyle Cycle Series premier amplified speaker system. Like all Pyle products, this motorcycle system has been thoroughly tested to ensure consistent, re.liable. performance. under some rigorous conditions. Our systems were designed to with stand water, moisture., heat, and direct sun exposure. We. pride ourselves in customer satisfaction. If you should have any questions regarding the. installation and/or ope.ration of your Pyle. Cycle. Series motorcycle. speaker system, which is not covered in this manual, please. contact your Pyle Dealer or Pyle. Technical Support.

What is Included?

Upon un-packing your new Pyle Cycle Series audio system, please check to ensure you have all the included parts.

Installation Instructions

• Step #I : Install •p• shaped clamp (Item #2)/”Z” shaped clamp (Item #3) threaded on to the bottom of each speaker enclosure (Item #1). Use the provided bolts (item #14).

• Step #2: Bolt each speaker with its mount to the handlebar of the vehicle. Hardware included will allow for mounting on to 1n diameter and smaller handlebars. Project each speaker at desired listening level, for best performance.

• Step #3: Secure speaker wires either through handlebars for a custom look, or use (Item #13) wire ties to secure to the handlebars.

• Step #4: Bolt the rotary volume control (Item #11) to the handlebars using the vehicle provided hardware. Then run 3.5 mm connection down to desired amplifier location. Use (Item #13) wire ties to secure to the handlebars. Have 3.5 mm male connection close to mount.
  The Connector that comes pre-installed on the amplifier wire harness (Item #8) was designed to allow for direct plug-in for most American Motorcycles (Item

  9). If mounting on a metric or universal vehicle, this harness will not be

  used, and replaced with the terminals/connectors provided in the enclosed parts bag according to the installation instructions (Items #6, #7, & #8). Follow wire instructions as shown in Diagram A Be sure to match the proper polarity for all connections. The polarity for the speaker terminals solid color wire(+), wire with stripe (-). Blue wire 12 Volt Positive (+) terminal trigger wire. Black wire 12 Volt(-) Ground to chassis of vehicle.

• Step #5: Bolt the Universal Handlebar MP3/ Audio Mount (Item #5) using provided black industrial velcro adhesive strips ( Item #12 ). Remove bolt from existing switch housing on motorcycle and secure to bracket.

• Step #6: (Only for use with PLMCA60): Bolt the USB Charger/ Power Source (Item #10) using vehicle provided hardware. This wire should be connected 12 Volt power source.

• Step #7: Run wires up to neck area of motorcycle ond plug into harness. Use (Item #13) wire ties to the frame.

• Step #8: Bolt amplifier on Motorcycle with provided Bolt (item #15). Best if mounted directly to frame out of reach from direct heat or crash bar.

• Step #9: Attach Velcro strips (Item #12) one side ta our Universal Bracket (Item #5) the other to your MP3 player/ audio source.

• Step #10: Connect 3.5mm male connection into Audio device, and opposite side into Micro Amplifier

Specifications

OPTIMC80/92

• 3″ motorcycle speaker
• frequency Response: 220Hz-21KHZ
• SPL: 85 dB (1W/1M)
• 4 ohm Impedance
• KAPTON voice coil
• Aluminum with shinny chromed Speaker housing
• Micro amplifier with harness & universal mount included
• • USB charge included, Dimensions: 2.5″(W)x1.75″(H)x 1.5″( L)
• Radio/MP3 Mount Dimensions: 3 5″( L) x O 625″(W)x 3 125″(H)

Controls and Features

1. POWER ON/OFF

   • Press and hold for 2 seconds—- Turn the power on/off When turn on, the display shows “PYLE” logo first then time; hen turn off, the display shows “PYLE” logo first, “goodbye” then power off.
   • Press the button —- play / pause the Music When the music is playing, press the button to pause; Press it agoin to play.

2. MENU

   • Press and hold for 2 seconds—- Turn the power on/off

   • Press or to select from calendar/music/line in/FM/Settings.

   • Press menu agoin to confirm

   • Calendar: ta display date ond time

   • Music: to play music files in USB device or St> cord

   • Line In: to play music from line in

   • FM: press or ta .. Ject the functions (1}-(4) (l) Auto Sairch (2Jt>,Jete CMlllle.l (3)t>elete All (4)Exit

   • Settings

   • Time Settings
     Press menu to enter. Press menu in sequence to set year, month.day, hour, minute and second. Press or to set time. Prus menu to sgve the setting.

   • Backlight period
     Press menu to enter. The backlight period can be from 0?30 seconds. Press to set. Set the period at “O”for constant backlight. Press menu to save the setting.

   • Language
     Press menu to enter. Press to choose from Chinese or English Press menu to save the setting

   • tools
     Tlme Pe.riod retting for Auto Turn Off
     The period con be from 0 – 120 seconds. Press to set. Press menu to save the setting.

Alarm Clock Setting

1. Alarm On/Off : Press menu to turn it on/off
2. Time: Press to set time. Press menu to save the setting.
3. Day: Press to set days. Press menu to save the setting.
4. Ringtones: Press to choose the ring tone. Press menu to save the setting.
5. Volume: Press to adjust the volume. Press menu to save the setting.
6. Exit: Press menu to exit the alarm clock setting.

FM Timer Setting

1. Timer On/Off: Press menu to turn it on/off.
2. Recording On/Off: Press menu to turn it on/off. When the recording is on, the FM program will be saved in SD card.
3. Time Setting: Press to set time.Press menu to save the setting.
4. Station: To set the station for timer. Press to search for the station. Press menu to save the setting.
5. Exit: Press menu to exit the FM timer setting.

Contrast: From Oto 7, press to set. Press menu agoin to save the setting.

Exit:

Press menu to exit.

1. Press and hold —- Volume down

2. Press and release —- Previous song / Function selection

3. Press and hold —- Volume up

4. Press and release —- Next song / Function selection
   Notes:

5. In Line in/FM/USB/SD play mode, press menu to pause. Press menu and hold to exit the mode and return to standby.

6. In any mode, insert USB or SD device to enter the USB or SD play mode.

WWW.LANZAR.COM

FREQUENTLY ASKED QUESTIONS

What is the Lanzar OPTIMC80 Motorcycle Speaker Amplifier System?

The Lanzar OPTIMC80 is a speaker and amplifier system designed for motorcycles, providing audio entertainment while riding.

What's included in the Lanzar OPTIMC80 system package?

The package typically includes speakers, an amplifier unit, mounting hardware, and wiring.

How many speakers are included in the system?

The Lanzar OPTIMC80 system usually includes two speakers.

What's the power output of the amplifier?

The power output can vary, but it's generally in the range of 600 to 800 watts.

Are the speakers weatherproof?

Yes, the speakers are usually weatherproof or water-resistant to withstand outdoor conditions.

Can the system be used with any motorcycle?

The system is designed to be compatible with most motorcycles, but some customization might be required for installation.

Is professional installation recommended?

It's recommended to have the system installed by a professional to ensure proper setup and wiring.

What's the source of power for the amplifier?

The amplifier typically connects to the motorcycle's battery for power.

Can I connect my smartphone to the system?

Yes, many models allow you to connect your smartphone or music player via Bluetooth or auxiliary input.

Is there a remote control for the system?

Some models include a remote control for adjusting volume and other settings.

How's the sound quality on the Lanzar OPTIMC80 system?

The sound quality can vary, but it's generally decent for motorcycle audio systems.

Can the system handle high speeds and wind noise?

The system's audio quality might be affected at very high speeds due to wind noise.

What's the installation process like?

Installation involves mounting the speakers, connecting the amplifier, and wiring the system to the motorcycle's electrical system.

Can I use the system for navigation prompts?

Yes, you can often use the system to hear navigation directions from a connected device.

Is the system compatible with FM/AM radio?

Some models include an FM/AM tuner, allowing you to listen to radio stations.

DOWNLOAD THE PDF LINK: Lanzar OPTIMC80 Motorcycle Speaker Amplifier System User’s Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>