dji Mavic 2 Zoom Drone Quadcopter Camera User Guide
- June 4, 2024
- DJi
Table of Contents
Drone Quadcopter Camera
User Guide
Aircraft
The DJITM MAVICTM 2 Zoom features omnidirectional Vision Systems and Infrared
Sensing systems and comes with a fully stabilized 3-axis gimbal camera with an
equivalent 2448 mm 2x optical zoom lens capable of shooting 4K videos and a
12-megapixel photo that support up to 4x FHD lossless zoom. DJI signature
technologies such as Obstacle Sensing and Intelligent Flight Modes like
HyperLapse, ActiveTrack MAVIC 2.0, QuickShot, Panorama, and Advanced Pilot
Assistance Systems, help you capture complex shots effortlessly. The Mavic 2
Zoom boasts a maximum flight speed of 44.7 mph (72 kph) and a maximum flight
time** of 31 minutes.
-
Gimbal and Camera
-
Forward Vision System
-
Downward Vision System
-
Lateral Vision System
-
Downward Infrared
Sensing System -
Auxiliary Bottom Light
-
microSD Card Slot
-
Front LEDs
-
Motors
-
Propellers
-
Antennas
-
Aircraft Status Indicator
-
Upward Infrared Sensing System
-
Backward Vision System
-
Intelligent Flight Battery
-
Battery Level LEDs
-
Power Button
-
Battery Buckles
-
USB-C Port
-
Link Button/Linking
Status Indicator
* The Vision Systems and Infrared Sensing Systems are affected by
surrounding conditions. Read the Disclaimer and Safety Guidelines, and User
Manual, and watch the tutorial videos in the DJI GOTM 4 app or on the official
DJI website to learn more. http://www.dji.com/mavic-2
** Maximum flight time was tested in an environment with no wind while
flying at a consistent 15.5 mph (25 kph). This value is for reference only.
Remote Controller
Built into the remote controller is the DJI’s long-range transmission
technology OCUSYNCTM 2.0, offering a maximum transmission range of 5 mi (8 km)
and displaying video from the aircraft to the DJI GO 4 app on your mobile
device at up to 1080p. An on-board LCD screen gives real-time aircraft data
information and the detachable control sticks make the remote controller
easier to store.
Maximum run time: 2 hours and 15 minutes*
- LCD Screen
- Flight Pause Button
- 5D Button
- Removable Control Sticks
- Power Button
- Antennas
- RTH Button
- Control Sticks Storage Slot
- Reserve Video-Downlink Port (USB)
- Mobile Device Clamp
- Flight Mode Switch
- Gimbal Dial
- Zoom Adjustment Dial
- Record Button
- Focus/Shutter Button
- Video-Downlink/Power Port (micro USB)
- C1 Button (Customizable)
- C2 Button (Customizable)
***** The remote controller is able to reach its maximum transmission
distance (FCC) in a wide-open area with no electromagnetic Interference at an
altitude of about 400 ft (120 m).
The maximum runtime is tested in a laboratory environment. This value is for
reference only.
Download the DJI GO 4 App and Watching Tutorial Videos
Search “DJI GO 4” in the App Store or Google Play or scan the QR code below to
download the app on your mobile device.
Watch the tutorial videos at www.dji.com/mavic-2
or in DJI GO 4 by tapping the icon in the top right corner of your
screen.http://m.dji.net/djigo4
DJI GO 4 is compatible with iOS 9.0 (or later) or Android 4.4 (or later).
Preparing the Aircraft
Charging the Batteries
Use the provided charger to fully charge the Intelligent Flight Battery before
first use.
Remove the remote controller cable before charging.
• Checking the Battery Levels and Powering On/Off
|
---|---
Press once to check the battery level.
Press, then press and hold to turn it on/off.| Press once to check the battery
level on the LCD screen.
Press once, then press and hold to turn on/ off the remote controller.
Preparing the Remote Controller
- Ensure the control sticks are firmly mounted.
- The remote controller cable with the Lightning connector is mounted by default. Use the appropriate cable for your mobile device to connect to the remote controller. When using an iPad or tablet, use the USB port on the remote controller.
- Do not use the Micro USB and the USB ports simultaneously for linking video.
Preparing for Takeoff
Use your DJI account to activate the aircraft. Activation
requires an internet connection.
Flight
Before taking off, make sure the Aircraft Status Bar in DJI GO 4 displays
“Ready to Go”.
**Ready to Go (GPS)
-
Auto Takeoff / Landing
Manual Takeoff / Landing
Combination stick command to start/stop the motors
**Left stick down (slowly) until you touch the ground
Hold a few seconds to stop the motors
The motors can only be stopped mid-flight when the flight controller detects a critical error.
** Remote Controller Operation**
The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left, and right movements. The gimbal dial controls the camera’s tilt.
Press the Flight Pause button for emergency braking during the
flight.
* In DJI GO 4
- Watch the tutorials in DJI GO 4 or on the official DJI website to learn more.
- Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks.
Fly Safe
Avoid flying over or near obstacles, crowds,
high-voltage power lines, trees, or bodies of water.
DO NOT fly near strong electromagnetic sources such as power lines and
base stations as it may affect the onboard compass.
DO NOT use the aircraft in adverse weather conditions such
as rain, snow, fog, and wind speeds exceeding 10 m/s or 22 mph.
Stay away from the rotating propellers and motors.
Learn more at: http://flysafe.dji.com/no-fly
It’s important to understand basic flight guidelines, for the safety of both
you and those around you. Don’t forget to read the Disclaimer and Safety
Guidelines.
Specifications
Aircraft
Weight| 905 g
Max Speed| 44.7 mph (72 kph) in Sport mode without wind
Max Service Ceiling Above
Sea Level| 19685 ft (6000 m)
Operating Temperature| 14° to 104° F (-10° to 40° C)
GNSS| GPS + GLONASS
Operating Frequency| 2.4-2.4835 GHz; 5.725-5.850 GHz
Transmitter Power| 2.4 GHz
(EIRP)| FCC: ≤26 dBm; CE/MIC: ≤20 dBm; SRRC: ≤20 dBm 5.8 GHz
FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm
Gimbal
Controllable Range| Pitch: -90° to +30°
Camera
Sensor| 1/2.3″ CMOS; Effective pixels: 12M
Lens| FOV: approx. 83° (24 mm), approx. 48° (48 mm)
35 mm format equivalent: 24-48 mm
Aperture: f/2.8 (24 mm) – f/3.8 (48 mm)
Focus: 0.5 m to ∞
ISO Range| Video: 100-3200
Photo: 100-1600 (auto); 100-3200 (manual)
Electronic Shutter Speed| 8-1/8000 s
Max Image Size| 4000×3000
Still Photography Modes| Single shot
Burst shooting: 3/5/7 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7 EV Bias
Interval
Video Recording Modes| 4K Ultra HD: 3840×2160 24/25/30p
2.7K: 2688×1512 24/25/30/48/50/60p
FHD: 1920×1080 24/25/30/48/50/60/120p
Video Storage Bitrate| 100 Mbps
Photo| JPEG, DNG (RAW)
Video| MP4, MOV (MPEG-4 AVC/H.264, HEVC)
Supported SD Cards| microSD Max Capacity: 128 GB (UHS-I Speed Grade 3 rating
required)
Remote Controller
Operating Frequency
Max Transmission Distance| 2.4-2.4835 GHz; 5.725-5.850 GHz
Max Transmission Distance
(Unobstructed and free of
interference)| FCC: 5 mi (8 km); CE/MIC: 3.1 mi (5 km); SRRC: 3.1 mi (5 km)
Operating Temperature| 32° to 104° F (0° to 40° C)
Battery| 3950mAh @ 3.83V
Transmitter Power| 2.4 GHz
(EIRP)| FCC: ≤26 dBm; CE/MIC: ≤20 dBm; SRRC: ≤20 dBm 5.8 GHz
FCC: ≤26 dBm; CE: ≤14 dBm; SRRC: ≤26 dBm
Operating Voltage| 1800mA @ 3.83V (when charging the mobile device)
Supported Mobile Device| Thickness supported: 6.5 – 8.5 mm, Max length: 160 mm
Size| Supported USB port types: Lightning, Micro USB (Type-B)
USB-C
Charger
Voltage| 17.6±0.1 V
Rated Power| 60 W
Intelligent Flight Battery
Capacity| 3850 mAh
Voltage| 17.6 V (max) 15.4 V (typical)
Battery Type| LiPo 4S
Energy| 59.29 Wh
Net Weight| Approx. 297 g
Charging Temperature| 41° to 104° F (5° to 40° C)
Range
Max Charging Power| 80 W
※ This content is subject to change without prior notice.
For online support, please scan this code with Facebook Messenger
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>