KORG TM-70T Combo Tuner Metronome User Guide
- June 16, 2024
- KORG
Table of Contents
KORG TM-70T Combo Tuner Metronome
Specifications
- Product Name: Korg TM-70T/TM-70C COMBO TUNER METRONOME
- Tuner on/off
- Volume control
- Metronome on/off
- Stereo mini-phone jack
- Monaural mini-phone jack
- Headphones/earphones compatibility
- Internal microphone for tuning (do not connect anything to the jack when using the built-in mic)
- Contact microphone compatibility (KORG CM-400)
- Instruments compatibility
Quick Start Guide
Thank you for purchasing the Korg TM-70T/TM-70C COMBO TUNER METRONOME. To
ensure trouble-free enjoyment
carefully read this Quick Start Guide and the Owner’s Manual and use the
product correctly.
https://korg.com/manual/TM-70T
When tuning with the built-in mic, do not connect anything to the jack.
- Quand vous vous accordez via le micro
Precautions
Location
Using the unit in the following locations can result in a malfunction.
- In direct sunlight
- Locations of extreme temperature or humidity
- Excessively dusty or dirty locations
- Locations of excessive vibration
- Close to magnetic fields
Power supply
Be sure to turn off the power when the unit is not in use. Remove the battery
in order to prevent it from leaking when the unit is not in use for extended
periods. Do not expose batteries to excessive heat, such as direct sun-shine,
fire or the like. Dispose of used batteries according to the battery
manufacturer’s instructions.
Interference with other electrical devices Radios and televisions placed
nearby may experience reception interference. Operate this unit at a suitable
distance from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to the switches or controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use
liquid cleaners such as benzene or thin-ner, or cleaning compounds or
flammable polishes.
Keep this manual
After reading this manual, please keep it for later reference.
Keeping foreign matter out of your equipment Never set any container with
liquid in it near this equipment. If liquid gets into the equipment, it could
cause a breakdown, fire, or electrical shock. Be care-ful not to let metal
objects get into the equipment. If something does slip into the equipment,
remove the batteries from the unit. Please contact the dealer who you
purchased the KORG products from.
Notice regarding disposal (EU only)
If this symbol is shown on the product, manual, battery, or package, you must
dispose of it in the correct manner to avoid harm to human health or damage to
the environment. Contact your local administrative body for details on the
correct disposal method. If the battery contains heavy metals in excess of the
regulated amount, a chemical symbol is displayed below the symbol on the
battery or battery package.
THE FCC REGULATION WARNING (for USA)
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These
limits are de-signed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- If items such as cables are included with this equipment, you must use those included items. Unauthorized changes or modification to this system can void the user’s authority to operate this equipment.
SUPPLIER’S DECLARATION OF CONFORMITY (for USA) Responsible Party: KORG USA
INC.
Address: 316 SOUTH SERVICE ROAD, MELVILLE, NY Telephone:
1-631-390-6500
Equipment Type: COMBO TUNER METRONOME Model: TM-70T
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful inter-ference, and
- this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTICE TO CONSUMERS This product has been manufactured
according to strict specifications and voltage requirements that are
applicable in the country in which it is intended that this product should be
used. If you have purchased this product via the internet, through mail order,
and/or via a telephone sale, you must verify that this product is intended to
be used in the country in which you reside. WARNING: Use of this product in
any country other than that for which it is intended could be dangerous and
could invalidate the manufacturer’s or distributor’s warranty.
Please also retain your receipt as proof of purchase otherwise your product
may be disqualified from the manufacturer’s or distributor’s warranty.
- All product names and company names are the trademarks or registered trademarks of their respective owners.
Using the tuner
Press the button to turn the tuner on.
Tuning while checking the meter
-
Change the reference pitch as neces-sary
-
Play a single note on your instrument to input sound
When using the built-in mic, place your instrument as close as possible to the mic. -
Adjust the pitch on your instrument
- Display the target note name for tuning
- Tune so that the meter lines up with the mark at the center and the LED at the center of the tuning guide lights up.
Tuning while listening to the sound (Sound Out)
- Press the button while the tuner is on
- Select the target note name for tuning
- Adjust the pitch on your instrument while listening to the tuner
- Press the button to turn the sound off
Tuning using the Transpose function
-
Select the reference tone
-
Adjust the pitch as described in “Tuning while checking the meter”
The tuning can be adjusted with Sound-Back. The Sound-Back detects the note you inputted, and outputs the closest reference pitch.
Using the metronome
Press the button to metronome the tuner on.
The default setting is pendulum (pendulum of a mechanical metronome) steps.
appears on the display.
Press + and − on the button at the same time for about one second to switch
between pendulum step and full step ( appears on the display).
-
Set the tempo
Press + and − on the button, or
press the button several times at regular intervals. -
Start the metronome
-
Set the beat
-
Press the button to stop the metronome
Using the tuner and metronome at the same time
Press the and buttons respectively to turn the tuner and metronome on.
Main specifications
- Power supply: Two AAA batteries (3 V, zinc-carbon or alkaline)
- Batteries are not included, so please obtain them separately.
- Battery life: When using the tuner only
- Approx. 250/150/85 hours (backlight: Off/Soft/Auto, A4 continuous input, using alkaline batteries)
When using the metronome only
- Approx. 200/130/75 hours (backlight: Off/Soft/Auto, tempo of 120, four beats, maximum volume, using alkaline batteries)
- Dimensions (W x D x H): 107 x 72 x 18 mm / 4.21” x 2.83” x 0.71”
- Weight: 79 g / 2.79 oz (without batteries)
- Included items: Quick Start Guide, CM-400 contact mic (TM-70C only)
- Specifications and appearance are subject to change without notice for improvement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>