cudy LT500-OUTDOOR Outdoor 4G Cat 4 AC1200 Wi-Fi Router Installation Guide

cudy LT500-OUTDOOR Outdoor 4G Cat 4 AC1200 Wi-Fi Router

Overview

1. Install the cellular antennas as shown in the picture.
2. Insert the Nano SIM card into the slot until you hear a click.
3. Connect the LAN/WAN (PoE IN) port of the router to the PoE port of the PoE adapter via an Ethernet cable
4. Plug the PoE adapter into a power outlet
5. Check the LED status, as long as one bar of signal strength turns solid, your router is successfully connected to the Internet. This process may take 2~5 minutes

Note: For a better internet connection, make sure 2 or 3 bars of the Signal Strength LED are lit. Otherwise, try orienting the router towards the cell towers when you install it on the roof or under the eaves

instruction

1. Connect to the router via ethernet cable or WiFi.
   Wired Connect your computer to the PoE Adapter’s LAN ports via an Ethernet cable
   Wi-Fi Connect to router’s WiFi network, WiFi network name and password, listed as below:

2. WiFi Network Name: Cudy-Outdoor

3. WiFi Network Name: Cudy-Outdoor-5G

4. WiFi Password: XXXXXXXX

5. Launch a web browser and enter http://cudy.net/ (or http://192.168.10.1/) in the address bar, use admin as a password to login

6. The below page will pop up if your SIM card needs a PIN to unlock. Please enter your PIN and click “Save & Apply”, then wait 15 seconds to connect to the Internet

7. Then please check the “Cellular” information card of the status Name Status Indication page. If the status is connected, means connected to the internet successfully.

8. If cellular is not connected, or if you want to customize the router yourself, click “Quick Setup” and follow the step-by-step instructions to customize the 4G, WiFi or other parameters

Note:

1. If you are not sure about APN parameters, please contact your internet provider.
2. If you encounter any other problems, don’t hesitate to contact our technical support team: at support@cudy.com

Enjoy the internet!

LED and Button

Need Help?

• Q1. What should I do if I cannot access the web management page?
  • A1: If the computer is set to a static IP address, change its settings to obtain an IP address automatically.
  • A2: Make sure http://cudy.net/ or http://192.168.10.1/ is correctly entered in the web browser.
  • A3: Use another web browser and try again.
  • A4: Reboot your router and try again.
  • A5: Disable and enable the active network adapter in use.
• Q2. How do I restore the router to its factory default settings?
  • A1: With the router powered on, press and hold the RESET button for 5 seconds before release. Wait the router resets.
  • A2: Log in to the web management page of the router, go to Advanced Settings >Reset, click Perform Reset and wait until the reset process is complete

FCC Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

WEEE

According to the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU), this product must not be disposed of as normal household waste. Instead, they should be returned to the place of purchase or taken to a public collection point for recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. For more information, please contact your local authority or the nearest collection point. Improper disposal of this type of waste may result in penalties according to national regulations

GNU General Public License Notice

The software code in this product was created by third parties and is licensed under the GNU General Public License (“GPL”). If applicable, Cudy (“Cudy” in this context refers to the Cudy entity offering respective software for download or being in charge of the distribution of products that contain respective code) makes the corresponding GPL source code available upon request via the official website, either independently or with the assistance of third parties (such as Shenzhen Cudy Technology Co., Ltd.). For GPL-related questions, email support@cudy.com. In addition, Cudy offers a GPL-Code-Centre under https://www.cudy.com/gplcodecenterdownload where users can get the GPL source codes used in Cudy products for free. Please note, that the GPL-Code-Centre is only provided as a courtesy to Cudy’s customers but may neither offer a full set of source codes used in all products nor always provide the latest or actual version of such source codes. The GPL code used in this product is subject to the copyrights of one or more authors
and is supplied WITHOUT ANY WARRANTY.

Contact

• Website: www.cudy.com
• Email :support@cudy.com
• Driver & Manual: www.cudy.com/download

Support
For technical support, the user guide and more information, please
visit: https://www.cudy.com/support

References

• Cudy, Your Home and Business Networking Solutions Provider
• Download Search – Cudy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>