OontZ Angle 3 Ultra Portable Wireless Bluetooth Speaker User Guide
- June 16, 2024
- OontZ
Table of Contents
- In the Package
- Buttons
- Lights
- Connectors
- Play Horizontally or Vertically
- Battery Features
- Charging the Battery
- Turning On and Off
- Pair & Connect — Step 1
- Pair & Connect — Step 2 —- From Your iPhone, iPad, or iPod
- Pair & Connect — Step 2 —- From Your Amazon Echo Dot or Amazon Echo
- Playing From Non-Bluetooth Audio Source Devices Using the 3.5mm Audio
- OontZ Wireless Dual Stereo – Important Notes
- IPX6 Water Resistant
- Wireless Hands Free Personal Speakerphone
- Safety and Precautions
- OontZ Angle 3 ULTRA Carry Case
- OontZ Wireless Dual Stereo
- Troubleshooting
- Customer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
OontZ Angle 3 Ultra Portable Wireless Bluetooth Speaker
In the Package
-
Quick Start Guide
-
Extra Long 6 foot Micro USB Charging Cable
-
3 foot 3.5mm Audio Cable
Note: The Micro USB Charging Cable and the 3.5mm Audio Cable are packed
below the cardboard insert in the box.
Slide out the cardboard insert to locate the cables.
Buttons
Lights
Connectors
Play Horizontally or Vertically
Battery Features
- The rechargeable battery comes with a partial charge and the speaker is ready to play.
- For maximum playtime, fully charge the battery.
- You can play while charging.
Power Saving Feature
- When playing from battery power the OontZ Angle 3 ULTRA will turn off after 30 minutes of not playing audio to conserve the battery charge. *
- When plugged into a charging source the OontZ Angle 3 ULTRA will remain on until you turn the power off.
- You can continue to keep the speaker plugged into a charging source even when it is fully charged.
*Exception: when connected to an Amazon Echo Dot or Amazon Echo, the power saving feature is disabled and the speaker will remain on.
Charging the Battery
- Insert the small end of the Micro USB Charging Cable into the Micro USB Charging Connector as shown.
- Insert the large end of the Micro USB Charging cable into either a USB wall charger for a Smartphone or iPhone, or a USB port on your laptop/computer to charge the battery (see illustrations on page 8).
Charging Time:
Up to 7 hours to fully charge a low battery
Insert the large end of the Micro USB charging cable into either a USB wall charger for a Smartphone or iPhone (a USB wall charger that is 5V 1.0A up to 5V 2.4A maximum) or a USB port on your laptop/computer to charge the OontZ Angle 3 ULTRA rechargeable battery.
Turning On and Off
Turn ON
Press and Release the Power Button
Turn OFF
Press and Hold Down the Power Button for 2 Seconds
Blue Light will turn off
Pair & Connect — Step 1
- Make sure your OontZ Angle 3 ULTRA battery has a sufficient charge, it is not able to connect when the charge is too low.
- Your device needs to be within 66 unobstructed feet of the OontZ Angle 3 ULTRA to pair and connect.
Turn ON your OontZ Angle 3 ULTRA
- The OontZ Angle 3 ULTRA is ready to pair and connect.
Solid Blue Light
- The OontZ Angle 3 ULTRA has automatically reconnected to the last device it was connected to and is ready to play.
- The OontZ Angle 3 ULTRA will automatically try to connect to the last device it was connected to each time it is turned on and that device is within range.*
The OontZ Angle 3 ULTRA can be connected to one device at a time.
- To pair and connect to a different device, you need to first disconnect the currently paired device.
- To disconnect the current device, press and hold down the Bluetooth button for 3 seconds.
- The Blue Light will begin flashing and the OontZ Angle 3 ULTRA is ready to pair and connect to your device.
Pair & Connect — Step 2 —- From Your iPhone, iPad, or iPod
- Go to Settings > Bluetooth, check Bluetooth is on
- Select ‘OontZ Angle 3 Uxxx’ when it appears under DEVICES (xxx: 3 characters which are unique to your speaker)
- The speaker will connect in a few seconds
- The Blue Light will turn solid blue and there will be a quiet chime
- You can now play your audio wirelessly to your OontZ Angle 3 ULTRA
From Your Smartphone, Tablet & Mobile Devices
- Go to Settings > Bluetooth, check Bluetooth is on
- Scan or Search and select ‘OontZ Angle 3 Uxxx’ when it appears under AVAILABLE DEVICES (xxx: 3 characters which are unique to your speaker)
- The speaker will connect in a few seconds
- The Blue Light will turn solid blue and there will be a quiet chime
- You can now play your audio wirelessly to your OontZ Angle 3 ULTRA
Note: Your Smartphone or Tablet instructions may vary
Important: Make sure the volume level is set high on your audio source device. The volume on the OontZ Angle 3 ULTRA and your audio source device both need to be set to the highest level for the loudest volume. The volume controls on your audio source device and the speaker work independently of each other.
From Your Apple Mac or Windows Laptop/Computer
For the pairing and connecting guide for your Apple Mac or Windows laptop/computer, please visit: TheOontZ.com/pairing
Pair & Connect — Step 2 —- From Your Amazon Echo Dot or Amazon Echo
To pair and connect the first time from the Amazon Echo Dot/Echo use the Alexa app on your device.
- Open the Alexa app
- Go to the ‘Home’ menu by pressing the 3 horizontal lines in the upper left corner next to ‘Home’
- Press ‘Settings’
- Select your Amazon Echo Dot/Echo under ‘Devices’ by pressing it
- Press ‘Bluetooth’
- Select the ‘OontZ Angle 3 Uxxx’ (xxx: 3 characters unique to your speaker) when it appears in the list of ‘Available Speakers’
- Alexa will announce: “Connected to OontZ Angle 3 Uxxx”
To connect the next time, turn on the OontZ Angle 3 ULTRA and say “Alexa, connect my speaker” or “Alexa, pair”
Important Note: When the OontZ Angle 3 ULTRA is playing from battery power and connected to the Amazon Echo Dot/Echo, the speaker will remain on and it will not automatically turn off after 30 minutes of not playing audio. This will use up the battery charge.
We recommend to:
-
Keep the OontZ Angle 3 ULTRA plugged into a USB wall charger. It can remain on and available to play from the Amazon
Echo Dot/Echo, without using up the battery charge.
– Or – -
Turn off the OontZ Angle 3 ULTRA when you are done listening.
- Either turn off the speaker by pressing and holding down the power button for 2 seconds,
- or say “Alexa, disconnect my speaker” and the OontZ Angle 3 ULTRA will automatically turn off after 30 minutes.
- When you want to connect and play to the speaker again turn on the OontZ Angle 3 ULTRA and say “Alexa, connect my speaker” or “Alexa, pair”.
For assistance with the Alexa app, contact Amazon’s Customer Service.
Open the Alexa app and select Help & Feedback > Email Customer Service
Playing From Non-Bluetooth Audio Source Devices Using the 3.5mm Audio
Cable
-
Make sure your OontZ Angle 3 ULTRA battery has a sufficient charge
Turn ON your OontZ Angle 3 ULTRA -
Plug one end of the included 3.5mm audio cable into the AUX IN Jack on the back of your speaker.
-
The Blue Light will turn solid Green
-
Plug the other end of the cable into the headphone jack on your audio device.
-
You are now ready to play.
Note: The Bluetooth on the OontZ Angle 3 ULTRA is disabled when the 3.5mm audio cable is connected to the speaker. Remove the cable from the speaker to enable Bluetooth.
OontZ Wireless Dual Stereo – Connect two OontZ Angle 3 ULTRA speakers together
*Play your music wirelessly through both speakers up to 100 feet apart
**
*Placing the speakers on the ground or having walls or obstructions between the speakers will significantly reduce the distance apart the two speakers can play together
Connecting two OontZ Angle 3 ULTRA Speakers together for Left Channel – Right Channel
-
Turn on both OontZ Angle 3 ULTRA speakers.
-
Pair and Connect one of the speakers with your device. When connected the Blue Light will be lit solid.
This speaker will serve as the Play Control Speaker. -
The second speaker must not be connected to any device, its Blue Light needs to be flashing. If the second speaker has a solid Blue Light it is connected to a device and you need to disconnect it, by pressing and holding down the Bluetooth button for 3 seconds until the Blue Light begins flashing.
-
On the Play Control Speaker (speaker with solid Blue Light) press and hold down the Play/Pause button ▷ for 5 seconds until the flashing White Light appears and the speaker says “Dual Pairing”.
-
After a few seconds the Play Control Speaker will say “Left Channel” and the second speaker will say “Right Channel” and the speakers will be connected together for Left Channel – Right Channel and you are ready to play.
Two OontZ Angle 3 ULTRA Speakers connected for Left Channel – Right Channel
Play Control Speaker
Second Speaker
- Use the buttons on the Play Control Speaker for play/pause, track back, track forward, answer and end phone calls. These controls are disabled on the second speaker when paired together.
- Use the Play Control Speaker for connecting to different audio devices via Bluetooth or AUX IN. The Bluetooth and AUX IN are disabled on the second speaker when paired together.
- Speakerphone call audio will only play through the Play Control Speaker
Changing to Dual Stereo from Left Channel – Right Channel
- Use Dual Stereo when placing the two speakers in different areas, and both speakers will play in full stereo.
- To set both speakers for Dual Stereo they must first be connected together for Left Channel – Right Channel (see page 15).
- With the speakers connected together for Left Channel – Right Channel, you can change the speakers to Dual Stereo.
- To change to Dual Stereo, press and hold down the Track Forward button on the Play Control Speaker for 5 seconds until the White Lights turn solid Orange on both speakers.
- Both speakers will say “Dual Stereo” and you are ready to play.
Changing back to Left Channel – Right Channel from Dual Stereo
- To change back to Left Channel – Right Channel, press and hold down the Track Forward button on the Play Control Speaker for 5 seconds until the Orange Lights turn solid White on both speakers.
- The Play Control Speaker will say “Left Channel” and the second speaker will say “Right Channel” and you are ready to play
OontZ Wireless Dual Stereo – Important Notes
Turning the speakers off
- Turning the Play Control Speaker off will turn both speakers off.
- Turning the second speaker off first will only turn that speaker off and the Play Control Speaker will play as a single speaker.
Turning the speakers back on
- Turn both speakers on and they will automatically try to connect to each other again.
- Turn one of the speakers on and a device can connect with it, and play as a single speaker.
Disconnecting the two speakers from each other
- Both speakers need to be turned on.
- On the Play Control Speaker press and hold down the Play/Pause button ▷ for 5 seconds.
The White Lights will turn off and the speakers will be disconnected from each other.
Playing the audio from a video in OontZ Wireless Dual Stereo
- To play the audio from a video or TV in OontZ Wireless Dual Stereo you will need to connect the Play Control Speaker to your device or TV using the 3.5mm audio cable, allowing the audio and video to play in sync with each other. If the Play Control Speaker is connected over Bluetooth to your device or TV there will be a delay in the audio playback from a video.
IPX6 Water Resistant
No more worries about the rain or getting splashed
Listen to music in the shower
Perfect for taking to the beach or by the pool
The rubber flap needs to be closed to keep the speaker water resistant and dustproof
Gentle Water Spray or Splash is okay
DO NOT allow speaker to sit in water
DO NOT allow speaker to submerge fully or partially in water
Safety Precaution: When the OontZ Angle 3 ULTRA speaker is plugged in to a charging source with the Micro USB charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.
IPX6 rating – The OontZ Angle 3 ULTRA can resist water spray & splash but cannot be partially or fully submerged or left in a wet environment for an extended period of time, any of which could cause unrepairable damage to the speaker.
When charging or using the 3.5mm audio cable, please keep the speaker away from water as it can be damaged by water entering the connectors.
Wireless Hands Free Personal Speakerphone
The Wireless Hands Free Personal Speakerphone feature works over Bluetooth with Smartphones and iPhones only; this feature is not supported when connected to other types of devices.
To answer an Incoming Call / To End a Call
- Press and Release the Bluetooth Button
To Reject an Incoming Call
- Press and Hold Down the Bluetooth Button for 2 Seconds
- Please keep the speaker close in front of you so you may be heard clearly by the listener.
- You can use your Smartphone or iPhone to switch between using Hands Free Speakerphone and your phone.
- When two speakers are paired together in OontZ Wireless Dual Stereo , calls will come through the Play Control Speaker only. Use the Bluetooth button on the Play Control Speaker for the speakerphone functions.
For more information on OontZ Wireless Dual Stereo please see page
Safety and Precautions
- When the OontZ Angle 3 ULTRA speaker is plugged in to a charging source with the Micro USB charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.
- Read and follow all instructions – All operating and use instructions should be followed.
- Protect the Micro USB charging cable from being pinched, particularly at the connectors.
- Unplug the Micro USB charging cable during lightning storms or when unused for long periods of time.
- Do not place speaker near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Refer all servicing to qualified personnel. Servicing is required when the speaker has been damaged in any way.
- Do NOT make unauthorized alterations to this speaker.
- Use this speaker only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC) in accordance with the manufacturer’s specifications.
- Do NOT place naked flame sources, such as lighted candles, on or near the speaker.
- Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like)
- If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made, seek medical advice.
Apple, iPhone, iPad, iPod, and Mac are registered trademarks of Apple Inc.
Amazon, Alexa, Amazon Echo and Amazon Echo Dot are registered trademarks of
Amazon.com, Inc.
Windows is a registered trademark of Microsoft Corporation
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes to this device not expressly approved by SoundWorks, INC may void the user’s authority to operate this device.
OontZ Angle 3 ULTRA Carry Case
Sold separately
- Lightweight neoprene rubber with reinforced zipper
- Includes a durable aluminum carabiner for easily attaching to backpacks, luggage, laptop bags, coolers, camera bags, purses, belts, and other clippable items
OontZ Wireless Dual Stereo
With a second OontZ Angle 3 ULTRA speaker you can wirelessly connect both speakers together.
Connect with a friend’s OontZ Angle 3 ULTRA or purchase a second OontZ Angle 3 ULTRA, sold separately at TheOontZ.com
Troubleshooting
For issues with your OontZ Angle 3 ULTRA, please view our troubleshooting tips at: TheOontZ.com/troubleshooting and select the OontZ Angle 3 ULTRA
Customer Support
If you have any issues with your OontZ Angle 3 ULTRA, our Customer Support
Team wants to assist you.
Please contact us at: TheOontZ.com/support and
fill in our customer support form.
Available at TheOontZ.com:
TheOontZ.com/angle3ultra-carry-case
References
- . Spend less. Smile more.
- OontZ Bluetooth Speakers – Oontz Store
- Pairing Connecting – Oontz Store
- Support – Oontz Store
- Troubleshooting – Oontz Store
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>