Schneider Electric ns0974a Net Shelter VL Enclosure Front Door Instruction Manual

Schneider Electric ns0974a Net Shelter VL Enclosure Front Door

Specifications

• Model: NetShelter VL Front Door (AR7002)
• Inventory: 1 door, 2 hinges, 1 handle assembly, 4 screws, 1 latch, 1 washer, 1 grounding wire

Installing the Door

1. Open the door at least 90 degrees before lifting it up and off the hinges.
2. Remove the grounding wire.

Removing the Door

1. Open the door at least 90 degrees before lifting it up and off the hinges.

Reversing the Door

1. Remove the grounding wire.
2. Remove the door.
3. Remove the hinges from the enclosure, rotate the hinges 180 degrees, and then reinstall them on.
4. Remove the screws securing the hinges in the door. Reposition and reinstall the hinges.
5. Remove the handle assembly from the door.
6. Remove the screw, latch, and washer from the door handle assembly. Rotate the washer 90 degrees and the latch 180 degrees; then reinstall the washer, latch, and screw.
7. Reinstall the door.
8. Reinstall the door handle assembly.
9. Reinstall the grounding wire.

FAQ

• Q: How do I install the door?
  A: To install the door, open it at least 90 degrees before lifting it up and off the hinges. Make sure to remove the grounding wire before installation.

• Q: How do I remove the door?
  A: Open the door at least 90 degrees before lifting it up and off the hinges.

• Q: How do I reverse the door?
  A: To reverse the door, follow these steps:

1. Remove the grounding wire.
2. Remove the door.
3. Remove the hinges from the enclosure, rotate them 180 degrees, and reinstall them on.
4. Remove the screws securing the hinges in the door. Reposition and reinstall the hinges.
5. Remove the handle assembly from the door.
6. Remove the screw, latch, and washer from the door handle assembly. Rotate the washer 90 degrees and the latch 180 degrees; then reinstall the washer, latch, and screw.
7. Reinstall the door.
8. Reinstall the door handle assembly.
9. Reinstall the grounding wire.

NetShelter® VL Enclosure Front Door (AR7002)—Installation Instructions

Inventory

Installing the door

Removing the door

Note : Open the door at least 90 degrees before lifting it up and off the hinges.

1. Remove the grounding wire.

2. Remove the door.

3. Remove the hinges from the enclosure, rotate the hinges 180 degrees, and then reinstall them on the other side of the enclosure frame.

4.  Remove the screws securing the hinges in the door. Reposition and reinstall the hinges.

5. Remove the handle assembly from the door.

6. Remove the screw, latch, and washer from the door handle assembly. Rotate the washer 90 degrees and the latch 180 degrees; then reinstall the washer, latch, and screw.
   

7. Reinstall the door.

8. Reinstall the door handle assembly.

9. Reinstall the grounding wire.

Customer support and warranty information is available at the APC Web site, www.apc.com.
© 2009 American Power Conversion. All rights reserved. All APC trademarks are property of American Power Conversion. Other trademarks are property of their respective owners.

References

• APC, a flagship brand of Schneider Electric - APC USA
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>