Schneider Electric A9E1832 Acti9 Phase Indicating Light Instruction Manual
- October 27, 2023
- Schneider Electric
Table of Contents
Schneider Electric A9E1832 Acti9 Phase Indicating Light
Installation instruction
Phase Indicating Light Electrical standard: IEC62094-1
PLEASE NOTE
- The installation, maintenance and eventual replacement of this device must only be carried out by a qualified electrician.
- This device must not be repaired.
- All applicable local, regional and national regulations must be complied with during the installation, use, maintenance, and replacement of this device.
- This device should not be installed if, when unpacking it, you observe that it is damaged.
- Schneider Electric cannot be held responsible in the event of non-compliance with the instructions in this document and in the documents to which it refers.
- The service instruction must be observed throughout the lifetime of this device.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH.
- Turn off all power supplying this device before working on it.
- Use a voltage tester with a suitable rated voltage in order to check that all active conductors aren’t energized.
Failure to follow these instructions will result in death or serious injury.
Description
Phase Indicating Light 3P active indicator
Installation
- Clip on DIN.
- Indifferent position of installation.
Dimensions
Connection
Technical characteristics
Main characteristics
-
Rated supply voltage:
230…400 V AC, 50/60 Hz -
3 LEDs red, service life
100000 h of constant lighting efficiency (consumption 0.9 W) Additional characteristics -
Degree of protection (device only):
IP 20 -
Degree of protection (device in the modular enclosure):
IP 40 -
Constituent materials:
RoHS 2003 compliant
Schneider Electric Industries SAS
35, rue Joseph Monier
CS 30323
F – 92506 Rueil Malmaison Cedex
www.se.com
NNZ9822700-00
References
- Schneider Electric Global | Global Specialist in Energy Management and Automation
- Систэм Электрик (Systeme Electric) | Официальный сайт, ранее Schneider Electric
- Schneider Electric UK | Energy Management and Automation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>