SEALEY AP223 3 Drawer Mid Boxes Instruction Manual
- June 16, 2024
- SEALEY
Table of Contents
Instruction Manual
MODEL NO: AP223,
AP225, AP226, AP223B,
AP225B, AP226B
3 DRAWER MID-BOXES WITH BALL BEARING SLIDES
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instructions
SAFETY
- DO NOT open more than one draw at a time.
- Close lid, lock draws before moving.
- DO NOT stand on the tool boxes.
- DO NOT mount the tool box on a truck bed or any other moving object.
- Apply brakes on swivel casters when not moving unit.
- DO NOT pull the tool box when moving, only push to move.
- DO NOT stand inside the draws.
INTRODUCTION
Manufactured from double skin side walls for extra strength and finished in a smooth, hi-gloss triple baked enamel. Resists scratches, oil, dirt and most solvents. Mid-boxes feature 35mm ball-bearing slides and recessed carry handles. Each drawer face has full length pulls with chrome style trims. All chests are supplied with tumbler type security locks and two numbered keys.
OPERATION
3.1. TOPCHEST
3.1.1. To lock the tool box. Make sure all draws are closed, close lid, turn
key anti-clockwise.
3.1.2. To unlock the tool box. Turn key clockwise and pull open draw.
3.2. MID-
BOX / ROLLCAB
3.2.1. To lock the tool box. Make sure all draws are closed, turn key anti-
clockwise.
3.2.2. To unlock the tool box. Turn key clockwise and pull open draw.
DO NOT slam the draws shut as damage may occur to the lock bar tabs or lock
pockets.
3.3. TO
REMOVE DRAWS
3.3.1. Empty draw and pull out until it stops.
3.3.2. Release the black retaining clips by pushing the righthand side clip up
and the left hand side down simultaneously, and pulling the draw out fig.1.
3.3.3. To re-install draws, place draw onto slides and push in.
3.4. CASTORS AND SIDE HANDLE
3.4.1. Roll cabinet is supplied with heavy duty castors, including two swivel
castors. Fix as shown in fig.2.
3.4.2. The side handle must be fixed on the same side as the swivel castors,
by inserting handle through slots in side of cabinet and fixing in place with
the four set screws provided.
MAINTENANCE
4.1. Lubricate the top and bottom channels of the drawer slides at least twice
a year.
4.2. If the lock bar tabs or pockets get damaged remove draws and with pliers
or a screwdriver fig.3.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No Liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 24 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
sales@sealey.co.uk
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
AP223, AP225, AP226, AP223B,
AP225B, AP226B Issue 2 16/11/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>