THORN CETUS3 Ceiling Light Instruction Manual
- June 16, 2024
- THORN
Table of Contents
THORN CETUS3 Ceiling Light I
Product Specifications
- Model: CETUS3
- Sizes: S, M, L
- Voltage: 220-240V
- Frequency: 50/60Hz
- Power: …W
- IP Rating: IP20 (S/M/L EHF/HF/HFIX/BC/COR), IP44 (LV)
- Made in: Germany
Product Usage Instructions
Replaceability Instruction
To replace the lamp, follow these steps:
- Make sure the power is turned off.
- Remove any covering materials or insulation from the luminaire.
- Disconnect the old lamp from the power source.
- Install the new lamp by connecting it to the power source.
- Turn on the power and test the lamp to ensure it is working properly.
Installation and Commissioning
The installation and commissioning of the CETUS3 should only be carried out
by authorized specialists. Follow these steps:
- Ensure the power is turned off before starting the installation.
- Follow the national installation regulations for proper installation.
- If you are not an authorized specialist, contact one to perform the installation and commissioning.
Usage Restrictions
The CETUS3 luminaire should not be covered with thermally insulating
material. Follow these guidelines:
- Do not cover the luminaire with any type of thermally insulating material.
- Ensure proper ventilation around the luminaire to prevent overheating.
FAQ
-
Q: Can I replace the lamp myself?
A: Yes, you can replace the lamp yourself by following the replaceability instruction provided in the user manual. However, make sure to turn off the power before replacing the lamp. -
Q: Can I install the CETUS3 without an authorized specialist?
A: No, the installation and commissioning of the CETUS3 should only be carried out by authorized specialists. Contact an authorized specialist for proper installation. -
Q: Can I cover the CETUS3 with thermally insulating material?
A: No, the CETUS3 luminaire should not be covered with thermally insulating material. Ensure proper ventilation around the luminaire to prevent overheating.
CETUS3 S/M/L EHF/HF/HFIX/BC/COR
Installation instructions
Dimension
This product contains a light source of energy efficiency class
- CETUS3 840
- X = C
- CETUS3830
- CETUS3LCS
- X = D
Installation and commissioning may only be carried out by authorized specialists.
Luminaire not suitable for covering with thermally insulating material.
The lamp is used exclusively for lighting and is to be installed in accordance with the national installation regulations. Any other use or installation is regarded as “not according to instructions”.
Installation instructions
DownloadTridonic basic DIM Wireless ControlApp if you have Bluetooth (BC) Luminaires
Tridonic basic DIM Wireless ControlApp
Accessory
- 96635243 CETUS3 S UGR INSERT
- 96635244 CETUS3 M UGR INSERT
- 96635245 CETUS3 L UGR INSERT
- 96635249 CETUS3 S IP54 COVER
- 96635250 CETUS3 M IP54 COVER
- 96635251 CETUS3 L IP54 COVER
- CEILING RING 250MM WH 96633598
- 96635254 T CONNECTOR WO 3POLE
- 96635255 T CONNECTOR WO 5POLE
- 96635256 T CONNECTOR WL 3POLE
- 96635257 T CONNECTOR WL 5POLE
- 96635252 DL CONNECTION BOX 3P TERM+LINECT
- 96635253 DL CONNECTION BOX 5P TERM+LINECT
www.thornlighting.com
Mat.-Nr: 06 980 370/4/04 07.23