LINOVISION POE-Extender02 Mini Passive 2 Port POE Extender User Manual

LINOVISION POE-Extender02 Mini Passive 2 Port POE Extender

Specifications

• Model: POE-Extender02
• Ethernet Port: 110/100 Base-T PoE power receiving port, 210/100 Base-T PoE power out port
• Transmission Distance: Extra 100m (330ft) PoE+Data transmission will be extended with one POE Extender02. Maximum transmission distance of 300m(1000ft) with cascade deployment
• PoE Input/Output Mode: Mode A, Mode B
• PoE Input/Output Line Pair: 1/2/4/5: + 3/6/7/8: –

Product Usage Instructions

Step 1: Package Contents
The package contains the following items:

• POE-Extender02 device
• Screws
• User Manual

Step 2: Typical Connection Diagram
Refer to the diagram below for a typical connection setup:

Step 3: LED Indicator
The device has LED indicators that provide information about the port status. The LED statuses are as follows:

Device Connection Status
Yellow LED: Indicate Data Link Activity Status
OUT| 110/100M RJ45 port, used to transmit PoE power and data for
PoE device / data only for non-PoE device, or cascade to the next
PoE Extender| Green LED: Indicate Device Connection Status
Yellow LED: Indicate Data Link Activity Status
CAMERA| 110/100M RJ45 port, used to transmit PoE power and data for
PoE device and transmit data only for non-PoE device| Green LED: Indicate Device Connection Status
Yellow LED: Indicate Data Link Activity Status

FAQ (Frequently Asked Questions)

• Q: What devices can be connected to the POE-Extender02?
  A: The POE-Extender02 can be used to extend ethernet and PoE power transmission distance for devices such as PoE IP cameras, VoIP phones, doorbell cameras, etc.

• Q: What is the maximum transmission distance supported?
  A: With one POE Extender02, an extra 100m (330ft) of PoE+Data transmission can be extended. With cascade deployment, the maximum transmission distance is 300m (1000ft).

• Q: What are the PoE input/output modes supported?
  A: The POE-Extender02 supports Mode A and Mode B for PoE input/output.

Introduction

POE-Extender02 can not only extend ethernet and PoE power transmission distance, but also simplify cabling by running one cable to power two PoE devices, such as PoE IP camera, VoIP phone, door bell camera, etc.

Unique Features

• Support IEEE 802.3af/at standard to transmit PoE power for PoE devices; Cooperate with 60W PoE injector, POE Extender02 supports cascade deployment to connect 3 PoE or non-PoE devices from Cat5/6 cable, with a maximum transmission distance of 300 metres;
• Interface: 1RJ45 10/100M port in, 2RJ45 10/100M port out; CAMERA port and OUT port both transmit power and data for PoE devices, but data is transmitted only when connecting non-POE devices.
• OUT port is also used to cascade the next PoE extender;
• Indicator: device connection status / data link activity status indication; Working temperature: -30℃～65℃;
• Installation mode : Wall mounting, DIN rail mounting;
• Plug-n-Play, no configuration or setup is required.

Package Contents

Typical Connection Diagram

Panel View

The Port Status LEDs

Data Sheet

Installation

PoE Extender supports Wall Mounting and DIN Rail Mounting. The installation shows below.

Device Dimension

Application

1. PoE Extend & Split to Two PoE Cameras
   Just run one network cable to connect two IP cameras, or add extra IP Camera without wiring new cables.

2. PoE Extend & Split to Two Network Devices
   It is very useful in an office building or hotel rooms to extend the transmission distance, and it is much easily to hook up new devices (PoE or non-PoE) without wiring a new cable.

3. Cascade Deployment
   It supports 2 or 3 levels of cascade deployment to connect multiple PoE or network devices from one PoE cable. (60W PoE+ Injector is strongly recommended in cascade deployment, with a second PoE extender connected to the OUT port.)

FAQ Related

What is the load capacity of PoE device that connected to this PoE extender?

Basically, the load capability depends on the PoE supply device, the total power consumption of two PoE output is less than the PoE power input. We recommend to use 60W High PoE injector to connect to the PoE extender.

Why the extender is unable to work?

The main reason is that the load capacity of two PoE outputs exceeds the power input of PoE Extender. In this way, please try to use 60W high PoE injector or mid-span to fix this issue.

Can this be used as an ethernet splitter to connect non-PoE devices?

Yes, Our PoE Extender supports connecting PoE devices and non-PoE devices. When connecting non-PoE devices, only data is transmitted, the non-PoE devices need to be powered separately.

Does this extender need an addition power supply?

No, it does not require local power supply. This PoE extender is powered by PoE devices (48V or 53V PoE Switch/PoE NVR/PoE Injector/Mid-span).

Do I need two of these to extend cat6 for 600 feet?

Yes, the PoE extender supports cascade deployment, max 300m (1000ft) transmission and running one cable to support 3 IP devices, but 60W PoE injector is required and IP camera power consumption should be less than 8W.

Can this be used for 2 computers instead of 2 cameras? And what are the speeds of this device?

Yes, this can be used for 2 computers and the maxim speed of the input port is 100M. Please be informed that the total speeds of two output port can’t exceed the speed of the input port. And the speed will be influenced by the transmission distance, the longer distance it is, the slower speed it provides.

What is the safe operating temperature range for this device?

The operating temperature for this product is -30°C to 65°C (-22 °F to 149 °F).

Contacts
For assistance, please contact linovision technical support: Email: support@linovision.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>