LINOVISION POE-SW805G5U Solar UPS PoE Switch with Built In Solar Charge Control User Manual
- May 15, 2024
- LINOVISION
Table of Contents
POE-SW805G5U-Solar
User Manual
Updated on October 30, 2023
Introduction
Having the features that power generation by solar energy, intelligent PoE power supply and control on auto charging and discharging, 5+1 high-power solar energy charging switch can more effectively solve the network application and power supply demand in complicated environments such as in remote mountainous areas, scenic spots, network electricity off shore and outdoor construction.
Important Notification
- Please read the user manual carefully before using. The improper operation may cause damage to machine components.
- Do not use in places near fire sources.
- Do not throw it in the water and also wet the internal component in the machine.
- Do not shorting the positive and negative poles of the battery interface with metal conductors.
- Please set DIP switches correctly before connecting any cables and device.
Application
Front Panel Connection
Display & Description
| LED Indicators | Status | Description |
|---|---|---|
| Port LED | Orange (PoE) | Always ON |
normal
Always OFF| No powered devices connected or no power supply
Green (Link)| Always ON| Network signal communicated
Always OFF| Network signal not communicated
Blink| Data in transit
PW：Power| Always ON| Normal
Always OFF| Power unconnected
BIN:Battery Charging| Always ON| Battery in charging,electricity<98%
Always OFF| Battery charging or not in charging
Flicker| To be fully charged,electricity≥98%
BOT: Battery Discharging| Always ON| Battery in charging,electricity>15%
Always OFF| Battery discharging finished or not discharging
Flicker| 1/2S:electricity<15%
X1：SFP| Always ON| SFP normally connected
Always OFF| SFP abnormally connected
P4| 24V：4 port 24V PoE| Always ON| 24V PoE power supplied
Always OFF| 24V PoE no power supplied
48V：4 port 48V PoE| Always ON| 48V PoE power supplied
Always OFF| 48V PoE no power supplied
P5| 24V：5 port 24V PoE| Always ON| 24V PoE power supplied
Always OFF| 24V PoE no power supplied
48V：5 port 48V PoE| Always OFF| 48V PoE power supplied
Always ON| 48V PoE no power supplied
BOT,BIN OFF at once : charging finished
Back Panel Connection
Note: The switch must be grounded.
Risk of fire or burns when there is short circuit or reverse connections.
| LED Indicator | Status | Description |
|---|---|---|
| CPU: System operation | Always ON | System crashed |
| Always OFF | System unsuccessfully started | |
| Flicker | 1/2S:battery normal |
1/4S:battery failure
BIN: Battery Charging| Always ON| Battery in charging, electricity<98%
Always OFF| Battery charging finished or not in charging
Flicker| To be fully charged,electricity≥98%
BOT: Battery Discharging| Always ON| Battery in discharging, electricity>15%
Always OFF| Battery discharging finished or not in discharging
Flicker| 1/2S: electricity<15%
SIN:Solar energy| Always ON| Solar energy input normal
Always OFF| Solar energy not input
Flicker| 1/2S:solar energy in delayed charging(time:10 mins)
1/4S:solar energy voltage input fault,charging stopped
VIN: DC| Always ON| DC IN normal
Always OFF| DC not input
Flicker| DC IN voltage fault, charging stopped
VOT:PoE voltage normal| Always ON| PoE voltage normal
Always OFF| PoE voltage abnormal
| Battery Type | DIP 1 | DIP 2 | DIP 3 | DIP 4 | Panel |
|---|---|---|---|---|---|
| 12V Lead Acid Battery | ON | OFF | ON | ON/OFF | |
| 24V Lead Acid Battery | ON | OFF | ON | ON/OFF | |
| 12.6V Linthium Battery | ON | ON | OFF | OFF | |
| 14.8V LiFePO4 Linthium Battery | ON | ON | OFF | ON | |
| 25.2V Linthium Battery | ON | ON | ON | OFF | |
| 29.6V LiFePO4 Linthium Battery | ON | ON | ON | ON |
Technical Spec
Solar & UPS Management|
---|---
Flexible Power Supply and Priority| Solar Power > External DC > Battery
Built-in Solar Charge Controller| Yes (PWM Controller)
Solar PV Input| 300W Max
≤32V(in DC 12V Mode ) or ≤45V(in DC 24V Mode)
Max. Charging Current| 5A
Support external DC charging| Yes
DC Input Range| For 12V Battery: DC 15-26V;
For 24V Battery: DC 30-36V
Built-in Battery Management| Yes
Battery Type| Lead Acid/Lithium/LiFePO4
Battery Input| 12/24V 5A
Battery Capacity| 50AH
Discharge Current| 8A
POE Switch|
---|---
Interfaces| (5) 10/100/1000Base-T RJ45 Ports
(1) 1.25G SFP Slot
PoE Outputs| Port 1: 802.3bt PoE++ 60W (Pin 1/2/4/5+, 3/6/7/8-)
Port 2-3: 802.3af/at PoE 30W (Pin 1/2+, 3/6-)
Port 4-5: 802.3af/at PoE 30W (Pin 1/2+, 3/6-) or Passive 24V PoE 24W (Pin
4/5+, 7/8-)
Total PoE Budge| 65W
Exchange Capacity| 12Gbps
Packet Forwarding Rate| 8.94Mpps
Mac Address Table| 2k
Packet Buffer Memory| 2.4Mb
Jumbo Frame| 10240 Bytes
Protection Level| 6kV Lightning protection
6kV ESD Contact discharge
System|
---|---
Enclosure| Metal, fanless design
Dimension| 5.91 x 5.12 x 1.34 Inches (160×130×34 mm)
Net Weight| 1.61 lbs (0.73kg)
Power Consumption| 5W Max (without PoE output)
Protection Level| 6kV Lightning protection
6kV ESD Contact discharge
Working Temperature| -4 ℉ ~ 140 ℉ (-20℃～60℃)
Storage Temperature| -22 ℉ ~ 158 ℉ (-30℃～70℃)
Working Humidity| 10%～90% RH non-condensing
Storage Humidity| 5%～90% RH non-condensing
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>