LINOVISION IPC608UW Underwater Camera User Manual

LINOVISION IPC608UW Underwater Camera

Connection Guide

It is an overall connection application diagram, among underwater camera, PoE Switch, PC,NVR, Smart Phone, etc. Please see below.
Note: the camera also support DC12V power supply.

Access Camera from WEB Browser

1. Download EZTools software
   Before you access camera from WEB Browser, please download the EZTools software to check the Camera IP address. Software download link and QR code:
   https://app.box.com/s/922sqty5vz4qb1ei3x5k4fnqrzoxgftp
   

2. Find the Camera IP address
   As long as the camera and the computer ar e in the same network, the camera will show in the device list.
   

3. Log In
   Open the IE browser, enter the IP address of the camera, log in with the following initial information, then you can view and set the camera.
   Noted: If computer software or NVR connect to the camera via the ONVIF protocol, and images can’t appear, please try to adjust the camera video encoding: H.264/MJPEG/H.265/H.265+.
   

4. LED Light Control
   
   Open the LED light
   When the environment is dark, click the “Image” and switch to “Night” mode in Day/Night Mode, the LED light will be turned on.
   
   Close the LED light
   When the environment is bright, click the “Image” and switch to “Day” mode, the LED light will be turned off.

5. Adjust the Video Compression, Ima ge Resolution and Frame Rate.

Access Camera via NVR

Ensure the camera has been connected, then do the following steps.
Note: The following information takes the c amera IP address: 192.168.1.88 as an example.

1. Click the right mouse button, choose the “Common Menu” and “Network”.
   

2. Cancel DHCP and enter “IPv4 Address / IPv4 Subnet Mask / IPv4 Default Gateway”.

   • IPv4 Address: 192.168.1.xxx (0-255)
   • IPv4 Subnet Mask: 255.255.255.0
   • IPv4 Default Gateway: 192.168.1.1
     
     Noted: The camera is DHCP, when using with NVR, the NVR IP address needs to be changed to the same network segment as the camera.

3.  Click the right mouse button and choose the “Menu”.

4. Click the “Camera”.
   

5. Find the camera and click the “blued pencil”.

6. Enter the “IP Camera Address/Protocol/User Name/Password” IP Camera Address: 192.168.1.88

   • Protocol: ONVIF
   • User Name: admin
   • Password: 123456
     

7.  After successful addition, the Status will display a blued icon.
   

8. Click the left mouse button to preview the image.
   

Noted: If computer software or NVR connect to the camera via the ONVIF protocol, and images can’t appear, please try to adjust the camera video encoding: H.264/MJPEG/H.265/H.265+.

Access Camera from GUARD STATION – CMS Software

1. Software download address and QR code.
   Windows: https://app.box.com/s/922sqty5vz4qb1ei3x5k4fnqrzoxgftp MAC: https://app.box.com/s/l9riil986jgo6jkw a3zos8ksdzt52sgi
   

2. After the installation is complete, open the software and add the camera. Guard Station Initial Information：

   • User Name: admin
   • Password: 123456
     

3. Modify the camera parameters through GUARD STATION.
   

4. Check the real-time video of the camera.
   

Access Camera from Guard Viewer – Mobile Phone App

1. Through the mobile phone app —
   “Guard Viewer”,you can watch the camera view remotely. Please search Guard Viewer in the Apple Store or Android vvMarket, then download and install it.
   

2. Click the “Sign Up” to create a new account and login with your account.

3. Click “Devices”, then “Scan”, scan the QR code from the camera web browser.

4. After adding the camera, then go to “Live View” to watch the camera live video.
   

References

• Windows.7z - Box
• MAC .7z - Box

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>