LINOVISION 504GD 5 Ports Full Gigabit POE Switch User Manual
- June 2, 2024
- LINOVISION
Table of Contents
LINOVISION 504GD 5 Ports Full Gigabit POE Switch
Introduction
- This Ethernet Switch has 4 TP ports and 1 fibre port.
- TP(RJ45) supports 10/100/1000Base-T(X), FullHalf duplex mode and auto MDI/MDI-X connection; 1000Base-FX supports 1 or 2 core Single-mode or Multi-mode fibre.
- It’s a great choice for integrating networks consisting of network devices such as IP cameras and wireless access points between remote locations.
Unique Features
DC9V-54V PoE Switch
- Support DC9V-54V input and standard IEEE802.3af/at PoE output with a built-in voltage booster.
5-Port Full Gigabit PoE Switch
- Provide 4 IEEE802.3af/at 30W PoE ports and 1 Gigabit uplink; All ports 10/100/1000Mbps self-adaptive full duplex; Total PoE budget 120W (DC24V/DC48V input) or 60W (DC12V input).
Non-Stop PoE Supply with Dual Power Input
- Support 2-channel DC9V-54V redundant power inputs and auto-failover, ensuring a high-reliability networking system. Compatible with Mode B PoE output only.
Industrial Design
- Compact IP40 rugged metal enclosure;
- Wide working temperature -40°C to 80°C;
- Support DIN-Rail & wall mount
Package Contents
Connection Diagram
Installation
Set-Up
- Connect the Ethernet port of the switch to an lP camera(PoE device)or network device with a network cable.
- Connect the fibre cable from the device(media converter or switch)on the other end to the SFP port of the converter.
- After the device is powered on, the PWR indicator will all be on. If the indicators are not on, check the power supply connection.
- After all cables are correctly connected, the indicators will be lit as per port status LEDs.
Panel View
The Port Status LEDs
Data Sheet
FAQ
What is the unique feature of this Solar PoE Switch?
Compared to a regular industrial PoE switch, this solar PoE switch has a built-in DC9V to DC54V voltage booster so it can be powered by any power source between DC9V and DC54V, for example, DC12V from solar power system, DC12V from vehicle battery, DC24V from commercial buildings, etc.
What kind of PoE devcies it can work with?
It provides PoE power to all of the standard IEEE802.3af/at PoE devices, like IP security cameras, VoIP phones, PoE wireless AP, etc.
Does it come with a Power adapter?
No power adapter is included. You can use it with a regular DC12V or DC24V power adapter, or industrial DC12V power supply unit.
Can it work in a harsh environment?
Yes, sure, that is what this PoE device designed for.
How does the redundant power input work?
This PoE switch can be powered by two channels of DC power inputs. If there is one power input fails, another power input will ensure non-stop operation of this PoE switch.
What is the draw current when connecting to DC 12V power?
If the PoE switch is not connected to a device, the current is 0.5A. If devices are connected, the maximum current depends on the power consumption of the connected devices, with a maximum of 5.5A.
What is the line pair of the switch?
Insert positive 4 and 5, and negative 7 and 8.
Does it work with non-PoE devices?
Yes, sure. Each PoE port supports PoE automatic detection. When connecting to a non-PoE device, it provide data transmission only, and will not output power to prevent burn or damage.
Will this PoE Switch work with a 24v PoE Devices?
No, the PoE Switch supports standard IEEE802.3af/at 48V PoE Power. It does not support 24V Passive PoE. Please contact us to get PoE 48V to PoE 24V adapter.
Contacts
- For assistance, please contact linovision technical support:
- Email: support@linovision.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>