LINOVISION POE-SW805G5U-Solar-EU Built in Solar Charge Controller Battery Instruction Manual
- June 1, 2024
- LINOVISION
Table of Contents
LINOVISION POE-SW805G5U-Solar-EU Built in Solar Charge Controller Battery
FAQ
- Q: Can I use a different type of battery with this switch?
- A: The switch is designed to work with Lead Acid, Lithium, or LiFePO4 batteries of 12V or 24V. Using a different type of battery may affect performance and is not recommended.
- Q: What is the maximum PoE output supported by this switch?
- A: The switch supports up to 60W PoE output on Port 1 (802.3bt PoE++), while Ports 2-5 support up to 30W PoE output.
- Q: How do I protect the switch from lightning strikes?
- A: The switch is equipped with 6kV lightning protection. Ensure proper grounding and follow recommended installation practices to minimize the risk of damage from lightning strikes.
Product Overview
5 Ports Solar & UPS POE Switch with built-in 5A Solar Charge Controller, Provide POE 48V/24V Outputs for IP cameras and Wireless APs
Outstanding Features
- SOLAR PoE SWITCH – Industrial PoE Switch with built-in solar charge controller, working directly with PV solar panels (Max. 300W) and batteries to supply non-stop PoE power for security cameras, Wireless bridges, LED lights, etc.
- FIVE PoE OUTPUTS – Port 1: Up to 802.3bt PoE++ 60W output; Port 2-3: PoE+ 30W output; Port 4-5: PoE+30W or Passive 24V PoE output; Total PoE budget 65W.
- BATTERY MANAGEMENT – Compatible to Lead acid battery, LiFePO4 battery and Ternary Lithium battery.
- UPS PoE SWITCH – Support external DC input (DC 15V ~ 36V) for UPS application, flexible and stopless power supply from external power, solar panel or battery.
- PASSIVE PoE 24V OUTPUT – The port 4 and 5 can be set to Passive PoE 24V mode, and provide direct PoE power to wireless bridges or APs.
- INDUSTRIAL DESIGN – Designed for harsh environment (-4 ℉ ~ 140 ℉ ), Fanless metal enclosure, 6KV surge protection.
Application
- Solar power system for security cameras, wireless bridges and APs.
- UPS power system to ensure non-stop PoE power supply for cameras and wireless bridges.
Specification
Solar & UPS Management
Flexible Power Supply and Priority| Solar Power > External DC > Battery
Built-in Solar Charge Controller| Yes (PWM Controller)
Solar PV Input| 300W Max
≤32V(in DC 12V Mode ) or ≤45V(in DC 24V Mode)
Max. Charging Current| 5A
Support external DC charging| Yes
DC Input Range
| For 12V Battery: DC 15-26V;
For 24V Battery: DC 30-36V
Built-in Battery Management| Yes
Battery Type| Lead Acid/Lithium/LiFePO4
Battery Input| 12/24V 5A
Battery Capacity| 50AH
Discharge Current| 8A
POE Switch
Interfaces| (5) 10/100/1000Base-T RJ45 Ports
(1) 1.25G SFP Slot
PoE Outputs
| Port 1: 802.3bt PoE++ 60W (Pin 1/2/4/5+, 3/6/7/8-) Port 2-3: 802.3af/at PoE 30W (Pin 1/2+, 3/6-)
Port 4-5: 802.3af/at PoE 30W (Pin 1/2+, 3/6-) or Passive 24V PoE 24W (Pin 4/5+, 7/8-)
Total PoE Budge| 65W
Exchange Capacity| 12Gbps
Packet Forwarding Rate| 8.94Mpps
Mac Address Table| 2k
Packet Buffer Memory| 2.4Mb
Jumbo Frame| 10240 Bytes
Protection Level| 6kV Lightning protection 6kV ESD Contact discharge
System
Enclosure| Metal, fanless design
Dimension| 5.91 x 5.12 x 1.34 Inches (160×130×34 mm)
Net Weight| 1.61 lbs (0.73kg)
Power Consumption| 5W Max (without PoE output)
Protection Level| 6kV Lightning protection 6kV ESD Contact discharge
Working Temperature| -4 ℉ ~ 140 ℉ (-20℃～60℃)
Storage Temperature| -22 ℉ ~ 158 ℉ (-30℃～70℃)
Working Humidity| 10%～90% RH non-condensing
Storage Humidity| 5%～90% RH non-condensing
Connection Diagram
Application
Panel Connection
Dimensions
- Weight: 0.73kg (1.61 lb)