Schneider Electric IMT47211 Mureva Lights User Manual

Table of Contents

Model Numbers: IMT47208, IMT47209, IMT47210, IMT47211, IMT47212, IMT47213, IMT47214, IMT47215
Website: https://manual-hub.com/
Power Supply: 230VAC 50Hz
Power Cord Type: H05RN-F 3 x 1.0mm2
Cable Length: 50cm
Patented Product: Counterfeiting Not Allowed
Manufacturer: SCHNEIDER ELECTRIC INDUSTRIES SAS
Address: 35, RUE JOSEPH MONIER, 92500 RUEIL-MALMAISON – FRANCE

Wire Connection Guide

The wire connection guide for the Mureva Lights is as follows:

Live Wire Colors

Diagram Showing

Unfortunately, the user manual does not provide a diagram showing the product.
Please refer to the product packaging or contact customer support for further assistance.

Q: Can I replace the external flexible cable or cord of the luminaire?
A: No, the external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire shall be destroyed.
Q: Where can I find the complete user manual?
A: The complete user manual can be found on the Schneider Electric Industries SAS website at https://manual-hub.com/.
Q: Is this product suitable for use in countries with different power supply specifications?
A: These products are designed for connection to a 230VAC 50Hz power supply. Please check the power supply specifications in your country before installation.
Q: Can I install the luminaires myself or should I hire a professional?
A: It is recommended to have the luminaires installed and fitted by a qualified electrician to ensure compliance with building regulations and for safety reasons.

IMT47208
IMT47209

IMT47210
IMT47211

IMT47212
IMT47213

IMT47214
IMT47215

This Product is Class I and must be Earthed.
Always switch off the mains supply before fitting.
Replace any broken or damaged glass as soon as possible.
Ensure all seals are intact and operational after fitting or maintenance.
Do not touch the lamp in use or just after use as there is a risk of being burnt.
Do not cover it with paper or cloth.
Take off from flammable materials.
Do not wash the lamp.
Do not use the lamp where the ambient temperature is over 45°C.
Keeping your eyes at a security distance, the light could cause damage.
This product has no user-serviceable parts.
Clean with a damp cloth and dry with a lint-free cloth or kitchen towel.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

Only to be installed outside arms reach.
prepare the mains wiring.
Use the mounting bracket to mark the hole centres for fixing.
Drill holes are suitable to accept wall plugs. Insert wall plugs.
Ensure mounting bracket.
Terminate wiring. Pay particular attention to any markings for Replace all covers.
Fit the floodlight to the mounting bracket with the screws,
Check seals, gaskets and cable gland operation before testing the luminaire.
Turn on the power supply and test the luminaire.
The installation height should be from 2.25 to 5 meters.

Important Infomation

It is recommended that luminaires be installed and fitted by a qualified electrician ensuring the installation complies with the current building regulations. These products are designed for connection to a 230VAC 50Hz supply.
Any broken or damaged parts should be replaced as soon as possible.
Schneider will not accept responsibility for any claims arising from a poor installation.

The brown wire is connected with the L wire of city electricity.
The blue one is connected to the N wire of city electricity.
The green/yellow one is connected with the earth wire.
Power Cord type H05RN-F 3 x 1.0mm2, cable length 50cm
Terminal block is not included.
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.