STRICH FH-1 Wooden Floor Guitar Stand Installation Guide
- June 16, 2024
- STRICH
Table of Contents
STRICH FH-1 Wooden Floor Guitar Stand
Unleash Your Inner Passion!
PARTS INCLUDED
FH-1 GUITAR STAND- INSTALLATION GUIDE
INSTALLATION STEPS
-
Step 01- Splice two parts of the upright stand
-
Step 02- Cover the screw holes with felt
-
Step 03- Check the felt pad is facing the logo
-
Step 04- Secure the upright stand to the base
-
Step 05- Screw the hanger yoke by clockwise rotation
-
Step 06- Done!
MOUNTING PARTS INSTRUCTION
- A: Upper half of the upright stand
- B: Lower half of the upright stand
- C: Stand Base {One-piece wood)
- D: Hanger
- E: Screws
- F: Simple Wrench
*PLEASE NOTE
- Put the two parts of the upright stand together firstly.
- When tighten the screws, keep the two parts of the stand horizontally aligned avoiding gaps that could lead.
- Pay attention to the upright stand’s orientation when mounting it to the bas
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>