VIOTEL V2.0 Smart Barrier User Guide

June 16, 2024
VIOTEL

VIOTEL V2.0 Smart Barrier

Specifications

  • Model: SMART BARRIER MONITOR NODE V2.0
  • Features: accelerometer, internal rechargeable battery with integrated solar panel, GPS, cellular (CatM1) modem
  • Preprogrammed and integrated

Installation

It is highly recommended that the Viotel SMART Barrier Node be installed on the last full barrier section before the anchor block downstream of the flow of traffic. This positioning allows the device to efficiently detect strain and crashes along the entire length of the barrier.

Mounting

To mount the Smart Barrier Node:

  1. Choose a secure location for mounting.
  2. Use an adhesive, side mounting holes, and/or a pole mount bracket with threaded holes to firmly mount the device.
  3. Attach the Smart Barrier Node to wire ropes using stainless steel cable ties.
  4. For detachable strain bands, use a tension device to compress both the top and bottom wires on the wire rope barrier.
  5. Wrap and secure the strain band onto the compressed section.
  6. Remove the tensioning device from the barrier.

Using the Magnet
To perform actions that require tapping the node using the magnet:

  1. Locate the magnet location indicated on the device.
  2. Perform sequential taps within 3 seconds to ensure they are registered together.

Device Activation
To activate the device:

  1. If the device is in Sleep mode, tap the node once. A solid blue light will appear from the status LED.
  2. If the device is already Active, tap the node once. A green light followed by a yellow light will appear from the status LED.
  3. The device will take 10 quick readings and upload them.

Viewing Data

VIOTEL-V2.0-Smart-Barrier-FIG-3To view the data from the Smart Barrier Node:
VIOTEL-V2.0-Smart-Barrier-FIG-4

  1. Go to your node’s Dashboard.
  2. You can now begin seeing the data collected by the device.

Contact Information
For more information and a full guide on this device, please refer to the User Manual. If you have any queries, you can email support@viotel.co.

CLAIM YOUR DEVICE
Navigate to https://my.Viotel.co to associate the device with your my Viotel account and access device management and dashboard display.

MOUNT
Node: Mount the device firmly to your chosen location using a secure mounting method: Adhesive, side mounting holes and/or pole mount bracket for threaded holes. Attach the Smart Barrier Node to wire ropes using stainless steel cable ties.

Detachable Strain Band
Use a tension device to compress both the top and bottom wires on wire rope barrier. Wrap and secure the Strain band onto the compressed section. Remove the tensioning device from the barrier.

CONFIRM MODE

Tap Once

  • If the device is in Sleep, a solid blue light will appear from the status LED. Proceed to step 5.
  • If the device is already Active, a green light then yellow light will appear from the status LED. The device takes 10 quick readings and uploads them. Proceed to step 6.

TOGGLE DEVICE ON

Tap Twice
This will turn the device on followed quickly by 2 green LED flashes. The device may take several minutes to update.

RECOMMENDED INSTALLATION LOCATION
It is highly recommended that the Viotel SMART Barrier Node be installed on the last full barrier section before the anchor block downstream of the flow of traffic. The device can efficiently detect strain and crashes along the entire length
of the barrier from this position.

OUR RESONANCE
Resonance describes the phenomenon of increased amplitude that occurs when a an external force or a vibrating system is equal or close to a natural frequency of the system on which it acts. Leveraging decades of experience in earthquake analysis and monitoring of mining seismicity, Viotel have a deep understanding of resonance and have developed a unique series of asset management solutions involving monitoring and analysis of vibrations and waveforms.

VIOTEL-V2.0-Smart-Barrier-FIG-5

The Viotel Smart Barrier Node features an accelerometer and is self-contained with an internal rechargeable battery with integrated solar panel, GPS and cellular (CatM1) modem. The Smart Barrier Node is shipped preprogrammed and integrated. Simply mount the sensor in the desired location and power on for reliable, continuous, real-time monitoring. www.viotel.co sales@viotel.co

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals