VIOTEL V2.1 Wireless Triaxial Tiltmeter User Guide
- June 14, 2024
- VIOTEL
Table of Contents
Quick Start Guide
WIRELESS TRIAXIAL TILTMETER NODE V2.1
V2.1 Wireless Triaxial Tiltmeter
-
CLAIM YOUR DEVICE
Navigate to https://my.Viotel.co to associate the device with your myViotel account and access device management and dashboard display. -
MOUNT
Mount the device firmly to your chosen location using a secure mounting method: Adhesive, side mounting holes and/or pole mount bracket for threaded holes.
Exact leveling is not necessary, as the device can be zeroed in the dashboard. -
USING THE MAGNET
Wherever instructed to tap the node using the magnet, do so at the centre of the ‘O’ in the Viotel logo. Sequential taps must be performed within 3 seconds to be registered together.
Consult the User Manual if your Tiltmeter version is older and has a different decal. -
CONFIRM MODE
Tap Once
– If the device is in Sleep, a solid blue light will appear from the status LED. Proceed to step 5.
– If the device is already Active, a green light then yellow light will appear from the status LED. The device takes 10 quick readings and uploads them. Proceed to step 6. -
TOGGLE DEVICE ON
Tap Twice
– This will turn the device on followed quickly by 2 green LED flashes. The device may take several minutes to update. -
VIEW DATA
Please head over to your node’s Dashboard to begin seeing the data.
Please refer to the User Manual for more information and a full guide on this
device.
For queries, email support@viotel.co
STATUS LIGHT
GREEN| Active
BLUE| Sleep
PURPLE| Test Shots
RED| Device is Busy
COMMS LIGHT
BLUE| Communicating with server
YELLOW| Collecting GPS Coordinates
RED| Unable to Communicate
OUR RESONANCE
Resonance describes the phenomenon of increased amplitude that occurs when a
an external force or a vibrating system is equal or close to a natural
frequency of the system on which it acts.
Leveraging decades of experience in earthquake analysis and monitoring of
mining seismicity, Viotel have a deep understanding of resonance and have
developed a unique series of asset management solutions involving monitoring
and analysis of vibrations and waveforms.
The Viotel Wireless Triaxial Tiltmeter features a high accuracy triaxial tilt
sensor and is self-contained with internal battery (solar panel optional), GPS
and cellular (CatM1) modem.
The tiltmeter is shipped pre-programmed and integrated. Simply mount the
sensor in the desired location and power on for reliable, continuous, real-
time monitoring.
https://www.viotel.co/triaxial-tiltmeter.html
www.viotel.co
sales@viotel.co