NEUATION TECHNOLOGIES iThem CH25 Incubator User Manual
- June 16, 2024
- NEUATION TECHNOLOGIES
Table of Contents
INTRODUCTION
This is a mini incubator that can control temperature in the chamber for
incubation experiments. The temperature ranges from -15°C from ambient to
60°C. This equipment is of25L capacity to hold different flasks up to 2L.
NOTE: This devices, cools based on the ambient temperature of the room.
It is not designed to be used outside in the heat as it will not maintain the
temperature in the camber which the samples needed. It works best when used
indoors in a cool room.
INTENDED USE
This instrument is to serve the temperature control and homogeneous controlled environment required for cell culture or for biological & non biological samples to be incubated. This instrument is intended to use indoor only & should be used by trained staff in laboratory.
FEATURES
- Digital Temperature control from Ambient -15 to 60°C.
- Compact footprint, usable on small bench space.
- Accepts multiple types of flask up to 2L.
- Internal power outlet for installing small shaker, mixer or other instruments.
TECHNICAL SPECIFICATIONS
| Temperature Range | Ambient -15 °C to 60 °C |
|---|---|
| Temperature Accuracy | 0.5 °C {at 37 °C) |
| Temperature Uniformity | +/-1.5 °C {at 37 °C) |
| Temperature Increments | +/-1°C |
| Dimension | 337 x 370 x 475 mm |
| Capacity | 25L |
| Weight | 151bs {6.5 Kg) |
| Electrical | 100-240V, 50-60Hz |
INSTALLATION
Position the appliance and allow it is to stand for two or three hours (ten
hours in summer) before it is turned on for the first time to allow the system
to settle. Do not position next to any heat source e.g. cooker, boiler or in
direct sunlight etc.
A clearance of 5 inch must be left between the sides of the appliance and any
adjacent cabinets or walls to allow for adequate air circulation. The
appliance is not designed for recessed installation meaning it should not be
built-in to the wall.
Install on a good firm level surface and any unevenness of the surface should
be corrected prior to installation.
SAFETY PRECAUTIONS
Do not use this item near water where it can be exposed to getting wet. Make
sure the item is only operated from the type of power source indicated on the
label. Do not add any attachments that were not originally included with the
item as they may cause harm to the machine and become a safety issue. Also
make sure power cord are placed in a position where they will not to waked on
or damaged. Lastly, make sure not to overload power outlets by plugging in to
many devices in one socket. Unplug unit when not in use for long period of
time.
OPERATING THE INSTRUMENT
- Open front of the unit and place samples inside.
- Plug the adaptor into the machines and then put electric plug into the wall.
- Turnpowerswitchto”On”or “Cool”.
- Set the desired temperature ranging from -15°C from ambient (can go as low up to 2C) to 60°C.
- The temperature can be changed by pressing “UP” for increment & “DOWN” for decrement. The changed values gets saved automatically.
CLEANING
Make sure to remove the machine from the well plug before cleaning and do not
use abrasive cleaners. We suggest using a damp cloth.
WARRANTY STATEMENT
This product is warranted to be free from defects in material and workmanship
for a period of two (2) years from date of purchase. Your product will be duly
repaired upon prompt notification in compliance with the following conditions:
The warranty is invalidated by any non-factory modification, which will
immediately terminate all liabilities on us for the products or damages caused
by its use. The customer shall be responsible for the product or use of
products as well as any supervision required for safety. If requested the
products must be returned to the distributor in well packed and insured manner
and all shipping charges must be paid.
NOTE: Some states do not allow limitation on the length of implied
warrantiesor the exclusion or limitation of incidental or consequential
damages. This warranty gives you specific legal rights. This warranty is given
expressly in lieu of all other warranties, expressed or implied.
The purchaser agrees that there is no warranty of merchant-ability or
offitness for any intended purpose and there are no other remedies or
warranties, implied, which extend beyond the description on the face of the
agreement. This warranty is only applicable to the original purchaser.
Product received without proper authorization will not be processed for
warranty or service. All items returned for service should be sent with
postage prepaid in the original packaging or other suitable packaging, padded
to avoid damage. We will not be responsible for damage incurred by improper
packaging.
NOTE: This warranty is valid only if the warranty is registered with the
supplier within 30 days from the date of purchase.
For you reference, make a note of serial number, date of purchase and supplier
here.
Serial No.:
Purchase Date:
Supplier:
PRODUCT DISPOSAL
In case the product is to be disposed of, the relevant legal regulations are
to be observed.
Information on the disposal of electrical and electronic devices in the
European Community.
The disposal of electrical devices is regulated within the European Community
by national regulations based on EU Directive 2012/19/EU on waste electrical
and electronic equipment (WEEE). According to these regulations, any devices
supplied after 13.06.05 in the business to business sphere, to which this
product is assigned, may no longer be disposed off in municipal or domestic
waste. They are marked with the following symbol to indicate this.
As disposal regulations within the EU may vary from country to country, please
contact your supplier if necessary.
Neuation Technologies Pvt. Ltd.
Plot No. 15, GIDC Electronic Park SEZ Kolavada Road, Gandhinagar- 382026,
Gujarat, India
Website: www.neuation.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>