Grilled MAU-TGMG140B-VA Fire Pit MGO BBQ Grill User Manual

Grilled MAU-TGMG140B-VA Fire Pit MGO BBQ Grill

Before using the FIREPIT remove any packaging material within and around the FIREPIT supplied for protection during transit

User Guide

1. Approximately 12 minutes after ignition, the temperature in the furnace will be increased and the secondary combustion will start working. We recommend using dry skin-peeled wood logs or wood pellets.
2. Best way to start fire
   • Place firelighter in the middle of the fire pit base
   • Arrange kindling around the firelighter in a teepee formation, and light firelighter
   • Once kindling has caught alight, arrange firewood around the kindling and allow to catch fire
   • Will take approximately 12 minutes for the secondary burn to commence for the low-smoke feature
3. It is not recommended to cook on this firepit due to the high heat and intensity of the flames.

Warning

1. NOT use if you suffer from heart and lung conditions because smoke inhalation may exacerbate existing conditions.
2. DO NOT move the product when it is burning.
3. DO NOT sit too close to the burning product.
4. DO NOT overfill the fire pit during use.
5. DO NOT use accelerants to light the fire.
6. DO NOT use in inclement weather.
7. Keep flammable liquid well away from the product as some flammable liquids can catch fire from the emitting heat.
8. Only handle the product with the poker if you have to.
9. Keep a considerable distance away from the product. Keep kids and pets away from the product.
10. Only adults can set up and maintain products.
11. Keep the setup area clear from any combustible materials. Dry leaves, paper, dry grass or pine needles can catch fire easily from the embers that come out of the product.
12. Once lit, approach the product with caution to avoid slipping and falling into it.

• Considerations Before Use
  • Check with your fire department for information on burning bans and chimenea & fire pit regulations in your area. Chimenea & Fire pits can remain hot and smoulder for a few hours after the visible fire has been extinguished. Smouldering chimeneas or fire pits are a common cause of injuries and burns, especially for children. The surface of this product will discolour when placed outdoors and from first use, due to the nature of the product and the heaUnaked flames.
• Choosing a Location For Setup
  • Chimeneas or Firepits need to be placed in a safe location. Do not place them near buildings,walls, outdoor furniture, inflatable pools or other flammable items. Nearby items could catch fire from heat or flames. Position on a non-flammable surface, clear of overhanging objects.
• Using The Chimeneas Or Fire Pits
  • The product is for outdoor use only, and will become very hot during use. To maintain the coating color, cover the bottom of the fire bowl with small stones or sandstones before each use Using the wrong materials inside a fire pit can be dangerous.Make sure to use only coal or wood. Do not use highly flammable items such as clothing, rags, paper towels, tissues or other items that could burn uncontrollably. Do not use petrol, lighter fuel, alcohol or similar substances to light a fire. Never leave the product unattended.
• Wind
  • Chimeneas or Fire pits should be protected from wind and not used when winds are high or gusty. Wind causes the smoke and fire to blow around, which could spread burning embers.When using Chimenea or Fire pits during light breezes, keep an eye on it to ensure no small embers escape. Do not place chimeras or Fire pits near anything that could catch fire.
• People & Pets
  • Supervised Children and Pets when the fire pit is in use. Ensure that everyone near the Chimenea or Fire pits understands it is an active fire and can produce smoke and embers. Do not allow children or animals to get close to the Chimenea or the Fire pit to avoid smoke inhalation and burns. The chimera or Fire pit will get very hot and could burn someone if they are too close.
• Extinguishing The Fire Properly
  • Chimenea or Fire pits are dangerous if the fire is not extinguished properly. Do not extinguish the fire by pouring water into a hot fire bowl because this may cause distortion, rust or flaking paint. Fire should be allowed to die out on its own, or extinguished with a fire extinguisher. Its important to note that fire can continue to smoulder and embers remain hot even if there is no visible flame. Make sure to stay near the fire pit after the flame is out to check for burning embers or smoke, which could indicate that a live fire still exists. When in doubt, after the bowl has been allowed plenty of time to cool down, fill the inside of the fire pit with water to make sure all the fire is out. The fire pit could still be hot for hours after use.
    DO NOT USE CHEMICAL BASED CLEANER as this may ignite a flame on next use.

LIST OF SPARE PARTS

For warranty purposes please enter the product number MAU-TGMG 1408 at

• www.garthsupport.com
• or call 1800 427 841

WARRANTY

YOUR FIREPIT IS COVERED AGAINST DEFECTS FOR A PERIOD UP TO 12 MONTHS FROM DATE OF PURCHASE. THIS WARRANTY EXCLUDES SURFACE RUST AND DAMAGE CAUSED BY ABUSE OR NEGLECT. PLEASE READ ALL CONDITIONS OF THE WARRANTY

This warranty is given by:

Garth Australia Pty Ltd. Suite 14, 981 North Road, Murrumbeena, VIC 3163, Australia

• Garth Support website: www.garthsupport.com
• or call: 1800 427 841
• email: service@garth.com.au
• www.garthsupport.com

This warranty is provided in addition to other rights and remedies you may have under Australian Consumer Law or the relevant. Consumer Laws in the country of purchase: You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Any claim under this warranty must be made within 12 (twelve) months of the date of purchase of the product to Garth Australia. Proof of purchase must be presented.

CONDITIONS OF THE WARRANTY

• The product is warranted for a period of 12 months from the date of purchase.
• Proof of purchase must be supplied when applying for a warranty.
• The operating manual must be retained in a safe place.
• The appliance must be operated and maintained in accordance with the instructions supplied in the operating manual.
• Any repair does not extend the warranty period.
• Any parts other than the original parts will void this warranty.

INSTALLATION CONDITIONS

• All installations must conform to the applicable Gas, Electrical and Building standards as laid down by the local codes for state or region.

WHAT IS NOT COVERED IN THE WARRANTY

• Removal or re-installation costs. This warranty does not cover costs for transit nor in-home service.
• Lack of maintenance, abuse, neglect, misuse, accidental or improper assembly of this appliance.
• Scratches, dents, corrosion or discolouration caused by heat, abrasive chemical cleaners or chipping of porcelain enamel parts.
• Cleaning and wear and tear – service calls of this nature are chargeable.
• Corrosion or damage is caused by exposure to the elements such as insects, weather, hail or grease and fat fires.
• Commercial use of this appliance.
• Unauthorized repairs or modifications during the warranty period.
• Glass breakage due to misuse or overheating.
• Cost of returning goods for repair or replacement.

RECORD THE FOLLOWING INFORMATION

• Date of purchase
• Purchased from
• Location
• Model name and number
• Serial number
• Receipt number

Note: the serial number is located on the outside of the packing carton

ATTACH THE RECEIPT TO THIS DOCUMENT

CONTACT INFORMATION

For service and warranty enquiries, go to Garth Support

• www.garthsupport.com
• or call 1800 427 841

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>