AVA Go Z12 Bluetooth Speaker User Guide
- June 16, 2024
- AVA
Table of Contents
BLUETOOTH SPEAKER
AVA+ Go Z12
User Manual
Thank you for purchasing Bluetooth Speaker AVA+ Go Z12.
Please carefully read user guide in properly and keep this for further
reference.
Packing list
Key function direction
- Pause/Play/Mode Button
- Previous track/Volume down
- Next track/Volume up
- Light button
Power On/Off
Power On: Move the button to “ON” to power it on, the speaker will sound “ting
ting ting”, the blue light flashes.
Power off: Move the button to “OFF” to power it off, the blue light turn off.
Key function direction
Short press “- ” button when playing music, the player will play the last
track;
Long press “-” to decrease the volume continuously
Short press “+ ” button when playing music, the player will play the next
track;
Long press “+” to increse the volume continuously
Short press “ /M” to pause/play music
Press three times button ” /M”: Bluetooth, FM mode, TF card.
Micro charging:
- Charging with a DC5V~1A USB power adapter
- When the speaker is fully charged, the red light will turn off.
Bluetooth Connection
- Start the speaker, there is a prompt tone, Bluetooth enters the pairing mode.
- Turn on the mobile phone, turn on Bluetooth, search for the Bluetooth code name “AVA+ Go Z12 ” and click; after a few seconds, you will hear the prompt tone of successful pairing and connection, the mobile phone displays connected.
- In subsequent use, as long as the device’s bluetooth is turned on, it can be automatically connected.
- Double press ” /M” to disconnect Bluetooth.
Playing MP3 files from Micro SD:
- Insert Micro SD card into TF Slot.
- Play, pause or skip a selected track using the controls on the speaker.
FM mode:
Press three time button “ /M” into FM mode, short press this button to search station automatically, press again to stop searching.
Then, short press “+”, “-” to choose the FM station.
Note: In the FM mode, need in charging cable increase the FM radio signal
TWS function: While at the same time open two devices and dont connect in the bluetooth mode, long press “ ****/M” button of either of the speaker and then, you will hear the prompt tone of successful pairing and connection.You search for the Bluetooth code name “AVA+ Go Z12 ” and click to use this function.
Attentions:
- Do not use abrasive cleaners to clean this product.
- Do not allow this product to be heated, close to fire source or direct sunlight for a long time. It will easy to burn and damage the electronic components.
- Do not attempt to disassemble this product to make any modifications.
- Do not use this product in the rain.
- lf you do not plan to use this product for a long time, please store it in a dry environment and charge the speaker at least once a month to prolong its life and avoid extreme temperatures and dust.
- lf you saw smoke coming out of the machine or other improper phenomenon , please contact the retailer to solve the issue immediately.
- Do not throw the machine.
Note!
In order to improve product performance, our products are constantly updated.
lt is no additional notice about technical issues and this manual is for
reference only, please forgive.
Thank you for your purchase.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>