typecase KB201TM-100 Keyboard Case for iPad 10th Generation User Manual
- June 16, 2024
- typecase
Table of Contents
typecase KB201TM-100 Keyboard Case for iPad 10th Generation User Manual
TECHNICAL SUPPORT
If you encounter any difficulties or have inquiries, please do not hesitate to
reach out to us at your earliest convenience.
For the quickest and most efficient support experience, please contact us
directly through one of the following channels, rather than through Amazon.
- Email: support@typecase.co
- Phone: 832 – 303 – 5080
- Chat: https://typecase.co/support
SETUP
SHORTCUT MAP
System
TOUCHPAD FUNCTION
Notice: Make sure bluetooth connected and touch pad function turned on!
INSTALLATION AND REMOVAL
Installation:
ROTATION AND USAGE
BATTERY AND CHARGING
To Check The Battery Status Of The Keyboard
Press on the keyboard. The battery level will be indicated by the number of lit indicators.
- battery level is between 100% and 70%
- battery level is between 70% and 40%
- battery level is between 40% and 10%
- battery level is less than 10%
Note: If the keyboard has been connected to an iPad, you can also check the battery status through the iPad’s battery widget.
To Charge The Keyboard
- Turn on the keyboard (if battery indicator is flashing, please charge the keyboard).
- Plug the charging cable (included) into the keyboard and power adapter (not included, iPad or iPhone power adapter recommended);
a)Battery indicator turns red when keyboard is charging;
b)Battery indicator turns blue when charging is complete.
TROUBLESHOOTING
If your keyboard is not functioning properly, please follow these steps to resolve the issue:
- Ensure Bluetooth is enabled on your iPad or other Bluetooth device.
- Verify that the keyboard is within 33 feet range.
- Confirm that the keyboard is charged.
- Turn on the keyboard, press to check the battery level by indicator.
- Press the ‘Pair’ key and check the Bluetooth connection status.
- Ensure the keyboard has successfully paired via Bluetooth.
If you are encountering unwanted cursor move when typing, or some keys like 7,8,9,U,O,J,K,L cannot be entered, please Turn OFF Assistive Touch > Mouse Keys as follows:
- On your iPad, go to Settings > Accessibility and select Touch.
- Select Assistive Touch, then select Mouse Keys.
- Turn Off Mouse Keys
If you are encountering unwanted auto-correction or punctuation, follow these steps:
- Open the Settings app > General > Keyboard > Hardware Keyboard.
- Turn OFF the options for Auto-Capitalization, Auto-Correction, and “.” shortcut (refer to the accompanying picture for reference).
If you experience difficulty pairing your keyboard via Bluetooth, please follow these steps:
- Delete any previously paired Bluetooth devices on your iPad.
- Turn off Bluetooth on your iPad.
- Restart your iPad.
- Turn on Bluetooth on your iPad.
- Turn off and on the keyboard.
- Repeat the pairing steps as described on page 2 and 3 of the manual.
If you’re still having problems troubleshooting your keyboard, try doing a hard reset:
Hold down C+R+L on the keyboard, until the keyboard indicators begin to flash. The keyboard will be reset.
PRODUCT SPECS
Operating distance: 10 meters (33 feet)
Modulation System: GFSK
Working voltage: 3.0-4.2V
Working current:0.88-200mA
Sleeping current: < 125μA
Charging current:<800mA
Continuous working
time without backlight: 60 hours
Charging time:<2.5 hours
Charging voltage: 5V
Key’s life span: > 5 million strokes
Operating temperature: -10 ±55°C
Maintenance: Please preserve the keyboard under normal temperature and
recharge under normal voltage.
IC CAUTION
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.