anko 43331208 Round black LED Mirror User Manual
- June 16, 2024
- Anko
Table of Contents
ROUND BLACK LED MIRROR
Model Number 43331208
Always read the instructions carefully before using.
For indoor use only.
Safety Instructions
- Do not immerse the appliance in water, clean the appliance surface with a dry cloth
- If product becomes damaged, dispose of as electrical waste according to local, state and federal requirements. Repairs should not be attempted.
- Do not place or store the appliance for long periods of time in a hot or humid environment
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
Special Feature
Brightness adjusting switch
Press to select warm, cool or natural
What’s in the box
Product Specification
| Mirror LED Light Wattage | Battery rating | USB input rating |
|---|---|---|
| Cool:3.7W | 3.7V DC, 1A, 4000mAh | 5V DC, 1A, Max. 5W |
Natural:4.5W
Warm:3.7W
How to charge the mirror
| 
---|---
Plug adaptor into mirror.| Touch power button on mirror to illuminate lights.
|
Touch the power switch again, the lights will be turned off.| Put your fingers
on the light button to switch between warm, cool and natural.
Hold your finger on the light button for 1-3 seconds to adjust the brightness
of the lights.
- Connect the Type-C USB port with a 5V, 1A power supply or computer by the provided USB cable.
- The indicator light will turn red once charging, after 6 hours the light will change to green which indicates the mirror is fully charged.
Made in China
Read User Manual Online (PDF format)
Loading......